Scytek electronic Vectra X3 Bedienungsanleitung

VECTRA

WITH

SEPERATE

LOCK/UNLOCK

BUTTONS

VEHICLE SECURITY SYSTEM

PRODUCT MANUAL

Limited

Lifetime

Warranty

This vehicle security system is warranted to the original purchaser, to be free from defects in

material and workmanship. The manufacturer will repair or replace at its option, and free of

charge for the first twelve (12) months, any part that proves defective in material or workmanship

under normal installation, use, and service, provided the product is returned to the manufacturer

freight prepaid. After the first 12 month warranty period there will be a maximum service charge

of $25.00 per calendar year (if required) for repair and/or replacement of any defective parts.

A copy of the original purchase and installation receipt must accompany any products

returned for warranty service. Warranty is limited to defective parts and/or replacement parts

only and excludes any incidental, and consequential damages connected therewith.

The manufacturer of this theft deterrent system makes no warranty against the theft of the vehicle

or its contents. This warranty is not to be construed as an insurance policy against loss.

WARRANTY OF INSTALLATION LABOR, REMOVAL AND RE-INSTALLATION CHARGES ARE

NOT THE RESPONSIBILITY OF THE MANUFACTURER.

Note: This Warranty is voided if the product was not installed by an

Authorized ScyTek Dealer.

1. About Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 1

2. 2-way LCD Remote Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 2

2-way LCD Remote Transmitter Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 2

Adding/Replacing 2-way LCD Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 3

Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 3

Setting The Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 3

Setting The Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 3

LCD Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 4

System Confirmation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 4

Transmitter Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 4

LCD Icon Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5

3. Remote Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 6

Remote Transmitter Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 6

Adding/Replacing Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 7

Two Car Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 7

Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 7

4. System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 8

Remote Arming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 8

Remote Disarming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 8

Tamper Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 9

Silent Arming/Disarming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 9

Passive Arming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 9

Panic Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 10

Emergency Override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 10

Optional Coded Emergency Override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 10

Automatic Rearming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 11

Valet Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 11

Driver Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11

5. Extended Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 12

Ignition Controlled Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 12

Dome Light Activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 12

Auxiliary Function Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 12

Disarm with Auxiliary Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 12

Remote Sensor Disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 12

Anti-Carjacking Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 12

6. System Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 13

Mounting the Control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 14

Mounting the Siren . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 14

Mounting the Shock Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 14

7. System Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 15

14-Pin Main Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 15

3 Pin Door Lock Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 15

Plug-in Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 16

umper Settings

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 16

8. System Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 17

Entering System Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 17

Default Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 17

Programmable System Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 17

Branch Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 19

9. Door Lock Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 20

10. Two Stage Door Lock Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 21

11. Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 23

12. Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Page

Table

Contents

Congratulations on your purchase of this state-of-the-art vehicle security system from ScyTek

Electronics. With proper installation this system will provide superior protection and performance

for many years to come.

System Contents:

•Main Unit

•One 5-Button 2-Way LCD Remote Transmitter

•One 5-Button Random Code Remote Transmitter

•2-Way Pager Transceiver Antenna

•High Output 6-tone Siren

•Dual Stage Shock Sensor

•Status LED

•Coded Emergency Override/ Valet Switch/Call Button built into the antenna(See Page 23)

Options and Accessories*

This ScyTek system includes several optional inputs and outputs allowing the creation of a

completely personalized security and convenience system by offering many optional features

such as:

*May require additional parts and/or labor, see store for details.

VECTRA X3 - Page 1

· Second Car Operation

· Remote Door Locking

· Two Stage Door Unlocking

· Starter Defeat

· Horn Honk

· Illuminated Entry

· Remote Window Control

· Remote Car Start

· Power Trunk / Hatch Release

· Glass Breakage Sensor

· Radar Sensor

· Auxiliary Lighting Control

· Back-up Battery Siren

About

Your

System

PLEASE NOTE:

Some of the features described in this manual may require additional parts and/or labor, and may not be included

as part of the standard installation of this unit. Additionally, many features of this security system have

selectable options that must be activated or programmed during the system’s installation. These items will be

identified in the following sections. Please discuss these features and any questions you may have regarding the

installation of this product with Your Authorized Dealer.

Page 2 - VECTRA X3

2-way LCD Remote Transmitter Description

The Astra’s 777 2-way LCD remote transmitter is offering increased range and confirmation of any activated

feature.

Page 1

Button 1

Arms and Locks* the system and when held for 5 seconds, activates the system’s Panic feature.

Button 1 also locks the doors when the system is in Valet Mode.

Button 2

Disarms and Unlocks* the system. Pressing Button 2 again operates the Passenger Unlock feature

(if installed).

Button 2

also unlocks the doors when the system is in Valet Mode.

Button 3

Activates the Auxiliary 1 output normally used for trunk release (note trunk icon on button).

Button 4

Activates the Auxiliary 2 output.

Button 5

is the Confirmation, Programming and the Page Shift button. Quickly pressing button 5 will activate

the Page 2 function. Pressing button 5 for 2 seconds activates the system’s confirmation feature which

will then display the current status of the system (armed, disarmed, engine running, etc.).

Page 2

Button 5 then Button 1 :

Silently Arms and Locks* the system. Button 1 also locks the doors when the

system is in Valet Mode.

Button 5 then Button 2:

Silently Disarms and Unlocks* the system, also unlocks the doors when the system

is in Valet Mode.

* If the Optional Keyless Entry Feature is installed.

Button 1 Button 2

Button 3

Button 4

Button 5

VECTRA X3 - Page 3

Adding/Replacing 2-way LCD Transmitters

(2 LCD remotes maximum)

When adding an optional 2-way LCD transmitter to the system, follow these steps:

1. Turn on the ignition key On, Off, On, Off, On, Off, and back On. (Key On 4 times)

· The siren will chirp 4 times.

2. Press and hold the Override switch for 5 seconds.

· The siren will chirp 4 times.

· The LED will illuminate.

3. Press Button 1 on the first transmitter, then on the second transmitter.

· The siren will chirp once for each transmitter learned.

4. Turn off the ignition key.

5. The siren will chirp 3 times to indicate the system has exited programming mode.

LCD Transmitter Battery Replacement

Your Astra Remote Transmitter uses a 1.5 volt AAA alkaline battery, which will require replacement in time.

Depending on the amount of use, the battery may last up to three months before it needs replacement.

When the battery needs replacing, the system’s operating range will decrease, the LCD display will show

only one of three bars in the battery icon, or the display and sounds may suddenly stop and start as the

battery voltage drops below minimum.

In order to change the battery, first slide the battery door locking pin to the side. Carefully slide the battery

cover downward until it is free. While replacing the battery make sure that the positive and negative

terminals are positioned correctly, then carefully reassemble the transmitter case.

Setting The Time

The LCD display is equipped with a 12-hour clock that in addition to displaying the time, offers an alarm

clock function as well as a remote activation timer.

To set the time:

1. Press and hold Buttons 2 and 3 for three seconds.

· The remote will beep two times and three bars will be shown indicating time set mode is entered.

2. Press Button 2 until the correct hour is displayed.

3. Press Button 3 until the desired minute is displayed. The button may be held down to scroll faster.

4. When the desired time is displayed, press Button 5 to store.

· The remote will beep 3 times to indicate the time has been set.

Setting The Alarm Clock

The alarm clock function can be set to play an alert melody at a specific time of day.

To set the alarm clock function:

1. Press and hold Buttons 2 and 3 until the remote beeps three times.

· The alarm clock bell and three bars will be shown indicating alarm clock set mode is entered.

2. Press Button 2 until the desired hour is displayed.

3. Press Button 3 until the desired minute is displayed. The button may be held down to scroll faster.

4. When the desired time is displayed, press Button 5 to store.

· The remote will beep 3 times to indicate the alarm clock has been set.

To disable the alarm clock function:

1. Press and hold Buttons 2 and 3 until the remote beeps three times.

· The alarm clock bell and three bars will be shown indicating alarm clock set mode is entered.

2. Press Button 1 to disable the alarm clock.

· The remote will beep 3 times to indicate the alarm clock has been disabled.

Page 4 - VECTRA X3

LCD Backlight

Transmitter Button 5 is used for confirmation, transmitter programming, as well as activation of

the LCD backlighting for use in the dark. Press button 5 to activate the LCD backlight.

System Confirmation

The 2-way transmitter's confirmation feature allows the current vehicle status to be displayed

at any time.

To display system status:

1. Press and hold Button 5 until the display shows CON.

· The transmitter will beep once.

2. Release Button 5.

· The transmitter will beep once.

· The icon representing the system’s current status will be displayed on the LCD panel.

Transmitter Programming

Pressing and holding transmitter button 5 will scroll through several transmitter programmable

options that may or may not be available depending on the model of system installed

DEG (degress)

Not applicable on this model.

CHP Sets the siren confirmation chirps ON or OFF:

1. Press and hold Button 5 until the display shows CHP.

·The transmitter will beep 3 times.

2. Release Button 5.

· The transmitter will beep once.

· The LCD panel will show a siren if the chirps are enabled or "off" if the chirps are

disabled.

SND Sound function allows disabling of the transmitter's confirmation tones.

To turn the transmitter confirmation tones on or off:

1. Press and hold Button 5 until the display shows SND.

· The transmitter will beep four times.

2. Release Button 5.

· The transmitter will beep once.

· The LCD panel will beep five times if enabled or vibrate and display “off” if the

confirmation tones are disabled.

PSV Passive function allows the passive arming mode to be enabled oe disabled with the

transmitter.

Note: This feature may not be available on all systems.

To enable or disable the passive arming mode:

1. Press and hold Button 5 until the display shows PSV.

· The transmitter will beep five times.

2. Release Button 5.

· The transmitter will beep once and the system will begin the passive arm mode

· The LCD panel will display “off” and vibrate twice if disabled.

VECTRA X3 - Page 5

VLT Valet mode function sets and resets the security system valet mode.

* this function is enabled only when the security system is disarmed

Set or reset the Valet mode:

1. Press and hold Button 6 until the display shows VLT.

· The transmitter will beep six times.

2. Release Button 5.

· The LCD panel will play a tone if the Valet mode was set “V" will be displayed indicating

that the system is in Valet mode.

· The transmitter will beep twice if the Valet mode was reset. “V" will turn off

indicating that the security system is out of Valet mode.

System Armed System Disarmed Warn Away Trunk Release

Indicates the alarm is Indicates the alarm is Indicates the warn Indicates the trunk

ON. OFF. away has been triggered. or auxilliary function

has been activated.

Door Open Shock Sensor Battery Low Trunk Open

Indicates the door zone Indicates the shock Indicates the battery Indicates the trunk or

has been triggered. sensor has been inside the transmitter hood zone has been

triggered. needs to be replaced. triggerd.

Alarm clock Valet Mode Panic

Indicates the Indicates the system Indicates the panic

progammable timer has been placed in mode has been

has been set. valet mode. triggered.

Page 6 - VECTRA X3

Remote

Transmitters

Remote Transmitter Description

The VECTRA X3 is supplied with one 5-button Remote Transmitter used to control system

operations.

Button 1

Arms and Locks* the system and when held for 5 seconds, activates the system’s Panic

feature.

Button

1 also locks the doors when the system is in Valet Mode.

Button 2

Disarms and Unlocks* the system. Pressing Button 2 again operates the Passenger Unlock

feature (if installed). Button 2 also unlocks the doors when the system is in Valet Mode.

Button 3

Activates the Auxiliary 1 output. This output will remain on for as long as the button is

pressed.

Button 4

Activates the Auxiliary 2 output. This output will remain on for as long as the button is

pressed.

Button 5

is the Page

Shift

button. The Page Shift button will change the function of Buttons 1

through 4 each time it is pressed, allowing access to additional features or multiple car operation.

Each time the Shift Button is pressed, the LED on the transmitter will illuminate and the

transmitter functions will shift to the next page, allowing access to another set of features. Once

shifted to another page (there are 4 pages total), the transmitter will remain on that page for 10

seconds or until a button is pressed, then return to page 1. Each time a transmitter button is

pressed and held, the LED will flash a number of times to indicate from which page it is

transmitting. Under normal operation, only pages 1 and 2 are used. Pages 3 and 4 are usually

used for Two Car Operation (see page 3).

Shift then Button 1

Arms and Locks* the system silently.

Shift then Button 2

Disarms and Unlocks* the system silently.

* If the Optional Keyless Entry Feature is installed.

Button 1 Button 2

Button 5

LED

Button 3 Button 4

Inhaltsverzeichnis

Andere Scytek electronic Autoalarmanlage Handbücher

Scytek electronic

Scytek electronic G5.2W SERIES Bedienungsanleitung

Scytek electronic

Scytek electronic Vectra X55 series Bedienungsanleitung

Scytek electronic

Scytek electronic 5000RS-2W Bedienungsanleitung

Scytek electronic

Scytek electronic Galaxy 2000RS-2W-DBP Bedienungsanleitung

Scytek electronic

Scytek electronic Galaxy 5000RS Plus Series Bedienungsanleitung

Scytek electronic

Scytek electronic Precision 700 series Bedienungsanleitung

Scytek electronic

Scytek electronic G-20 Bedienungsanleitung

Scytek electronic

Scytek electronic ASTRA 777 Mobile Bedienungsanleitung

Scytek electronic

Scytek electronic VISIONGUARD 6000 Bedienungsanleitung

Scytek electronic

Scytek electronic ASTRA 777-TC Bedienungsanleitung

Scytek electronic

Scytek electronic Vectra X5 Bedienungsanleitung

Scytek electronic

Scytek electronic VISIONGUARD 8000 Bedienungsanleitung

Scytek electronic

Scytek electronic Galaxy 5000RS Plus Series Bedienungsanleitung

Scytek electronic

Scytek electronic G-20 Bedienungsanleitung

Scytek electronic

Scytek electronic Vectra X1 Bedienungsanleitung

Scytek electronic

Scytek electronic SkyTrak-1000 Bedienungsanleitung

Scytek electronic

Scytek electronic G777 Bedienungsanleitung

Scytek electronic

Scytek electronic PRECISION PRO 5500 Bedienungsanleitung

Scytek electronic

Scytek electronic Astra 7T7 Series Bedienungsanleitung

Scytek electronic

Scytek electronic P10 Series Bedienungsanleitung

Scytek electronic

Scytek electronic 5100RS-22W Bedienungsanleitung

Scytek electronic

Scytek electronic ASTRA 777 Mobile Bedienungsanleitung

Scytek electronic

Scytek electronic Galaxy 5000RS Bedienungsanleitung

Scytek electronic

Scytek electronic ASTRA 1000RS-DBP Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Clifford

Clifford 3606X Bedienungsanleitung

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

Clifford

Clifford Sabre II Bedienungsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Clifford

Clifford CYBER 2 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung

Clifford

Clifford Nova 3 Bedienungsanleitung

Viper

Viper 560XV Bedienungsanleitung

SECO-LARM

SECO-LARM 300C Bedienungsanleitung