Seada GENESIS 265 Bedienungsanleitung
GENESIS™265 User Guide
This user guide provides instructions for setting up SEADA GENESIS™265 using the G265
UMPlatform, G265 Designer Software and G265 Client.
Table of Contents
1. G265 Introduction..........................................................................................................................1
1.1. G265 Overview................................................................................................................................... 1
1.2. Key Features....................................................................................................................................... 1
1.3. Specifications ..................................................................................................................................... 2
1.4. Models................................................................................................................................................ 2
1.5. System Diagram ................................................................................................................................. 2
2. Connection Setup...........................................................................................................................3
2.1. Set up the G265 transceiver............................................................................................................... 3
2.2. Ethernet (LAN) connection with the control PC................................................................................. 3
3. Config the G265 transceiver............................................................................................................4
3.1. Main Tabs........................................................................................................................................... 4
3.2. Information Tabs................................................................................................................................ 5
3.3. Sub Tabs –Input (Encoder –TX) ........................................................................................................ 6
3.4. Sub Tabs –Output (Decoder –RX)..................................................................................................... 8
4. G265 Designer Software User Guide .............................................................................................10
4.1. Login Window .................................................................................................................................. 10
4.2. Designer Menu................................................................................................................................. 11
4.3. Designer Tool Menu......................................................................................................................... 12
4.4. UI Design Area.................................................................................................................................. 13
4.5. UI Tool Menu.................................................................................................................................... 14
4.6. UI Design –UI Menu ........................................................................................................................ 15
4.6.1. New Page .................................................................................................................................. 16
4.6.2. Rectangle .................................................................................................................................. 18
4.6.3. Text ........................................................................................................................................... 19
4.6.4. Button ....................................................................................................................................... 20
4.6.5. Slider ......................................................................................................................................... 22
4.6.6. Signal......................................................................................................................................... 23
4.6.7. Panel ......................................................................................................................................... 24
4.6.8. List............................................................................................................................................. 25
4.6.9. Get back .................................................................................................................................... 26
4.6.10. Matrix...................................................................................................................................... 27
4.7. Panel Setting .................................................................................................................................... 28
4.7.1. Scan Output .............................................................................................................................. 28
4.7.2. Bind windows to outputs.......................................................................................................... 28
4.7.3. Mode......................................................................................................................................... 28
4.7.4. Audio Follow ............................................................................................................................. 28
4.8. Input Setting..................................................................................................................................... 29
4.8.1. Scan Input ................................................................................................................................. 29
4.8.2. Config Inputs............................................................................................................................. 29
4.8.3. New Group................................................................................................................................ 29
4.8.4. Group Signal.............................................................................................................................. 29
4.9. User.................................................................................................................................................. 30
4.9.1. New User................................................................................................................................... 30
5. G265 Client User Guide.................................................................................................................31
5.1. Login Window .................................................................................................................................. 31
5.2. Run G265 Client on the control PC .................................................................................................. 32
5.3. System Control................................................................................................................................. 33
6. Practical Example.........................................................................................................................34
7.1. Set up a G265 Client for output panel, IPC control, audio control and system control .................. 34
7. Troubleshooting...........................................................................................................................37
Commands for the G265 transceiver.................................................................................................39
SD-EN-030 1 / 40 V1.0
1. G265 Introduction
1.1. G265 Overview
The GENESIS™265 (G265) Transceivers (encoder and decoder in one unit) are designed to transmit video
and audio over standard Gigabit Ethernet with low latency and high image quality in real-time.
As a decoder, with its unique decoding ability to decode up to 16 IP streams, the G265 can be used as
multi-viewers or matrix switchers incorporated with RTSP IP sources for applications in security,
conference, corporation, university etc. Its state-of-art management software enables ‘drag and drop’
resulting in unlimited IP decoding on single unit.
As an encoder, G265 can offer features like content cropping, OSD, source marking which makes it more
flexible for all sorts of applications.
Thanks to its standard H.265/264 protocol and low bandwidth requirement, The G265 can work with the
existing network infrastructure which means there are no needs for dedicated cabling.
1.2. Key Features
• Fanless design, no moving parts
• Supports H.265/264 for high quality AV-over-IP
• Supports multi-view and matrix switching
• Supports inputs any size, anywhere on screen
• Supports PoE
• Supports both digital and analog audio
• Supports RS232, RS485, IR, Relay and I/O
• Supports up to 3840 x 2160
• Supports up to 16 inputs per screen as decoder
• Supports up scaling and down scaling
• Supports scrolling text and OSD
• Supports input content cropping
• Supports drag and drop
• Supports marking on source
• Supports custom desktop background image
• Supports input signal real-time preview
• Supports working with 3rd party RTSP decoders
• Supports 3rd party RTSP sources (e.g., IP camera) decoding/displaying
• Supports Multicast
• Supports preset layouts
• Low latency
SD-EN-030 2 / 40 V1.0
1.3. Specifications
1.4. Models
Models
G265HDRT
G2654KRTF
G2654KRTP
Type
Transceiver
Transceiver
Transceiver
Video Input
1 x HDMI
1 x HDMI
1 x HDMI
Maximum Windows per Screen
4
16
16
Video Output
1 x HDMI
1 x HDMI
1 x HDMI
1.5. System Diagram
Input / Output Protocol
RTSP
Output Format
H.265/H264
RS232 Connection
Phoenix connector
Power Supply
12DC from main power adapter or PoE
Audio Input / Output Connector
Phoenix connector
Audio Input Format
Unbalanced
Operating Temperature Range
0~40 degrees centigrade
Operating Humidity Range
10%~90% non-condensing
Storage Temperature Range
-20~60 degrees centigrade
Storage Humidity Range
10%~90% non-condensing
Cooling
Passive cooling
Warranty
2 years
SD-EN-030 3 / 40 V1.0
2. Connection Setup
2.1. Set up the G265 transceiver
Before starting up, user first needs to set up the G265 transceiver. The steps will be as follow:
1. Use CAT6 (or higher) to connect G265 transceiver with an IP switch supports PoE (optional).
2. Check the switch on the back of device and ensure it is on TX for encoders and RX for decoders.
3. Connect ‘HDMI output’on G265 decoder to an output, such as a screen, with an HDMI cable.
4. Connect input sources, such as media players and PCs, to ‘HDMI input’ on G265 encoders.
5. Connect any 3rd party RTSP IP sources, such as IP cameras and 3rd party encoders, into the same
IP switch as the G265 transceiver with CAT6 (or higher).
6. Connect any other 3rd party devices to the G265 transceiver, or to the IP switch.
7. Connect the control PC to the same IP switch as the G265 transceiver.
2.2. Ethernet (LAN) connection with the control PC
The default static IP address of the G265 transceiver is 192.168.1.208. User needs to change IP address of
the control PC to a static IP address and the same network segment as the device at TCP/IPv4 in ‘Ethernet
Properties’.
•IP address: any address between
192.168.1.2 and 192.168.1.254 except the
address which has been taken by the G265
transceiver.
•Subnet Mask: 255.255.255.0
•Default Gateway: 192.168.1.1
SD-EN-030 4 / 40 V1.0
3. Config the G265 transceiver
Run ‘G265 UMPlatform’, user can change parameters, such as the network setting and output setting, for
the G265 transceiver if necessary.
3.1. Main Tabs:
This tab provides basic functions to operate the G265 transceiver.
Input/Output: Switch between the list for the encoders and decoders.
Scan: Scan and display all G265 transceiver under the current Input/Output list.
Restart: Restart all the selected devices.
Select All: Select all the devices in the current Input/Output list.
Reverse Select: Reverse-select the devices in the current Input/Output list.
Scan Setting: Bind the local IP address of the control PC to scan the devices. If the device is not displayed
in the list after pressing ‘Scan’, use this button to bind the device and scan again.
Reset: Reset the selected device. The selected device must be restarted after being reset.
Advanced options: Gain access to additional functions for internal engineering use only.
SD-EN-030 5 / 40 V1.0
3.2. Information-Tabs:
This tab contains information about the G265 transceiver.
Input/Output IP: The IP address of the device.
Firmware Version: The firmware version of the device.
SD-EN-030 6 / 40 V1.0
3.3. Sub-Tabs –Input (Encoder - TX):
This tab provides customised configurations for the selected encoders.
(Always click ‘Apply’ to apply modifications to the device)
To use G265 transceivers as RTSP encoders for 3rd party decoders, the mainstream address is
rtsp://192.168.1.208/0 and substream address is rtsp://192.168.1.208/1.
Network setting: Config the network parameters for the device, including name, IP address, subnet
mask, gateway, and MAC address.
Encoding setting: Config settings for the mainstream and substream of the device.
Audio setting: Config the audio setting for the encoder. The default setting is ‘3.5mm’, corresponding to
the ports on the back of the device. User can change it to ‘HDMI’ to use the HDMI port.
I/O setting: User can set up the encoder to control third-party devices. This includes system control via
RS232, RS485, I/O, IR, TCP/IP, and Relay.
Led setting: Config the device for the use of LED screen.
Advanced setting: Config the functions of the selected G265 encoder.
•Multi-cast: Config multi-cast steaming.
•Loop out: Configure the signal from the loop-out device, such as brightness and sharpness.
SD-EN-030 7 / 40 V1.0
•Master-slave: Change the master-slave mode. Ensure that there is only one ‘Master’ in both
the encoders and decoders.
•Crop: Crop the input signal to any size.
•OSD: Add OSD onto the input signal.
•System Info: The information of the device. As ‘Switch to output’ function is no longer being
used, user needs to toggle the switch on the back of the G265 transceiver and restart it to
switch between encoder and decoder.
System query: Display the system log of the selected device.
Firmware Update: Update the firmware of the selected G265 transceiver. Note that this function is only
visible when the software is full screen.
Andere Handbücher für GENESIS 265
1
Inhaltsverzeichnis
Andere Seada Transceiver Handbücher
