Sealey TA120 Bedienungsanleitung

INSTRUCTIONS FOR:

CURRENT TESTER 20A

MODEL NO’s:TA120 (STANDARD FUSE)

TA121 (MINI FUSE)

 Observe standard workshop safety procedures when using the TA120/121.

pWARNING! The Fuse blade may become hot during testing. Allow to cool before removing.

pWARNING! DO NOT exceed Maximum Load: 20A/48V for Max 10sec.

 Ensure vehicles ignition, is switched OFF, before connecting or disconnecting TA120/121.

 Keep the work area clean, uncluttered and ensure there is adequate lighting.Keep tools and other

items away from the engine, and ensure you can see the battery and working parts of engine clearly.

 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery. Contain or tie back

long hair.

Keep children and unauthorised persons away from the working area.

 DO NOT disassemble. TA120/121 must be checked by qualified service personnel only.

 DO NOT get TA120/121 wet or use in damp or wet locations or areas where there is condensation.

 DO NOT use TA120/121 for any purpose other than for which it is designed.

DO NOT pull by the cables to free from the fuse terminals.

 DO NOT operate TA120/121 if damaged.

When not in use store in a safe, dry, childproof location.

pWARNING! The warnings, cautions and instructions referred to in this manual cannot cover all

possible conditions and situations that may occur. It must be understood that common sense and

caution are factors which cannot be built into this product, but must be applied by the operator.

1. SAFETY

2. INTRODUCTION / SPECIFICATION

Fast, accurate and safe current measurement at the

fuse box. Ideal for fault-finding on car and commercial

vehicle electrical circuits. Features large LCD display.

Plugs straight into the vehicle’s fuse board.

Range: ....................... 0-20A - 0-48Vdc

Max Load:.................. 20A/48Vdc for Max 10sec

Accuracy: ................... ± 2% reading + 2 digits

Fuse Type: ................. TA121: Mini, TA120: Standard

Operating Temp: ........ 0°C to 50°C (32°F to 122°F)

Storage Temp: ........... -20°C to 60°C (-4°F to 140°F)

Relative Humidity:...... <70% operating, <80% storage

Operating Altitude: ..... 7000ft (2000 meters) maximum

TA120, TA121 Issue No: 2 (L) - 16/07/14

pWARNING! Suitable only for automotive circuits. Not suitable for 110 - 230V applications.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL

REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE

FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE

AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE

INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product

will, if used according to these instructions, and properly maintained, give you years of

trouble free performance.

Original Language Version

Environmental Protection.

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should

be sorted, taken to a recycle centre and disposed of in a manner which is compatible with the environment.

When the product is no longer required, it must be disposed of in an environmentally protective way.

Take to your local recycling centre to be disposed of properly.

Do not incinerate battery as it may explode when exposed to fire.

Do not attempt to open battery.

3. OPERATION

4. MAINTENANCE

3.1. Measuring

3.1.1. With the vehicle ignition OFF, remove the fuse from the circuit to be tested and insert it into the fuse

jack (fig.1.2), this ensures the correct level of circuit protection.

3.1.2. Insert the plug into the vehicle fuse socket.

3.1.3. Switch on the vehicle ignition if required, to energise the circuit and then switch on the tester fig.1.5.

3.1.4. Operate the circuit under test and the LCD will display the measured current.

pWARNING! The Fuse blade may become hot during testing. Allow to cool before touching.

4.1. Battery Replacement

Power is supplied by a 12V A23S battery. The ‘BAT’ symbol appears on the LCD display when

replacement is required.

pWARNING! To avoid electric shock ensure all inputs are disconnected from any circuit before

removing the battery cover.

To replace the battery, remove the screw from the back of the unit and remove the cover.

Remove the exhausted battery and replace with a new observing the connection polarity.

Replace cover.

NOTE! Dispose of old battery according to local authority guidelines.

4.2. Cleaning

Clean using a soft damp cloth.

Store in a safe, dry, childproof location. .

TA120

1. Standard Blade Type

2. Fuse Jack

3. Lead

4. LCD Display

5. Power ON / OFF

TA121

1. Mini Blade Type

2. Fuse Jack

3. Lead

4. LCD Display

5. Power ON / OFF

g.1

TA120, TA121 Issue No: 2 (L) - 16/07/14

Original Language Version

01284 757500

01284 703534

sales@sealey.co.uk

Sole UK Distributor,

Sealey Group, Kempson Way,

Suffolk Business Park,

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and

component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full

name and address, including postcode.

Battery Removal

For battery removal, see section 4.1.

Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of

products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance

scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705

TA120, TA121 Issue No: 2 (L) - 16/07/14

Original Language Version

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sealey Prüfgeräte Handbücher

Sealey

Sealey TA319.V2 Bedienungsanleitung

Sealey

Sealey Auto Service Line TA131 Bedienungsanleitung

Sealey

Sealey TA126 Bedienungsanleitung

Sealey

Sealey CV0011.V2 Bedienungsanleitung

Sealey

Sealey V5402.V2 Bedienungsanleitung

Sealey

Sealey TA320 Bedienungsanleitung

Sealey

Sealey PP100.V2 Bedienungsanleitung

Sealey

Sealey CV0011 Bedienungsanleitung

Sealey

Sealey BT2013.V4 Bedienungsanleitung

Sealey

Sealey Auto Service TA111.V2 Bedienungsanleitung

Sealey

Sealey BT2003.V5 Bedienungsanleitung

Sealey

Sealey TST22 Bedienungsanleitung

Sealey

Sealey BT102.V2 Bedienungsanleitung

Sealey

Sealey VSE2020.V3 Bedienungsanleitung

Sealey

Sealey VS8193 Bedienungsanleitung

Sealey

Sealey HBS97.HGV Bedienungsanleitung

Sealey

Sealey TA130.V2 Bedienungsanleitung

Sealey

Sealey VS926 Bedienungsanleitung

Sealey

Sealey CV0011 Bedienungsanleitung

Sealey

Sealey BT103 Bedienungsanleitung

Sealey

Sealey VSE952 Bedienungsanleitung

Sealey

Sealey BT91/10.V3 Bedienungsanleitung

Sealey

Sealey Auto Service BT91D.V2 Bedienungsanleitung

Sealey

Sealey MC105 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung