Sealey AP1100M Bedienungsanleitung

INSTRUCTIONS FOR:

MOBILE WORKBENCH 2-LEVEL

MODEL NO: AP1100M

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT

CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL

INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions

and maintained properly, give you years of trouble free performance.

1. SAFETY

WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this bench.

Locate bench in a suitable working area.

 Keep the work area clean, uncluttered and ensure there is adequate lighting.

WARNING! Use bench on level and solid ground, preferably concrete. Avoid tarmacadam since the bench may sink into the surface.

Always apply the brakes to the locking castors before using the bench.

Keep the bench clean and tidy in accordance with good workshop practice.

Keep children and unauthorised persons away from the working area.

 DO NOT place heavy loads on the lower shelf.

 DO NOT use the bench for any purpose other than that for which it is designed.

DO NOT carry out any work on the bench without the workpiece being adequately secured. Use clamps or a vice (not included) to secure

the workpiece (available from your Sealey dealer).

 DO NOT use the bench outside.

 DO NOT get the bench wet, or use in damp or wet locations or areas where there is condensation.

 DO NOT clean the bench with any solvents which may damage the paint surface.

WARNING! This workbench is heavy and assistance should be obtained before assembly.

2. INTRODUCTION

Sturdy steel construction workbench with a capacity of 300kg. Two shelves that allow unobstructed access. Fitted with two xed castors, two

locking castors and a heavy-duty handle.

3. SPECIFICATION

Model No: .............................................. AP1100M

Size incl. Handle (W x D x H): .......................1180 x 700 x 830mm

Work Surface (W x D): ..................................1100 x 700mm

Capacity: .................................................. 300kg

AP1100M Issue: 1 - 05/11/15

4. ASSEMBLY

Key:

1: Bench Top

2 Leg Frames (x2)

3: Support Brackets (x4)

4: Castor Brackets (x4)

5: Locking Castors (x2)

6: Fixed castors (x2)

7: Handle

8: Shelf

g.1

4.1. Place the bench top (g.1.1) upside on the oor. Use a oor covering to protect the

bench top.

4.2. Fasten the four support brackets (g.1.3) to the leg frames using the xings

provided (g.2).

4.3. Fasten the leg/bracket assemblies to the channels welded to the underside of the bench

top (g.3).

4.4. Fasten the four castor brackets (g.1.4) to the legs.

4.5. Fasten the two locking castors (g.1.5) to the legs at one end.

4.6. Fasten the two xed castors (g.1.6) to the legs at the other end.

4.7. Fasten the shelf (g.1.8) to the crossmembers of the leg frames.

4.8. Using two people, turn the bench right way up.

4.9. Fix the handle (g.1.7) to the end of the bench to which the locking castors are tted.

g.2

g.3

Inhaltsverzeichnis

Andere Sealey Werkzeugaufbewahrung Handbücher

Sealey

Sealey AP2513B.V3 Bedienungsanleitung

Sealey

Sealey FWB1 Bedienungsanleitung

Sealey

Sealey AP1200MW Bedienungsanleitung

Sealey

Sealey AP6115BE Bedienungsanleitung

Sealey

Sealey API Series Bedienungsanleitung

Sealey

Sealey AP22DFC Bedienungsanleitung

Sealey

Sealey AP2010.V2 Bedienungsanleitung

Sealey

Sealey AP335M Bedienungsanleitung

Sealey

Sealey CX313.V2 Bedienungsanleitung

Sealey

Sealey CX1042D Bedienungsanleitung

Sealey

Sealey APMS01 Bedienungsanleitung

Sealey

Sealey AP6310BE Bedienungsanleitung

Sealey

Sealey AP0618 Bedienungsanleitung

Sealey

Sealey PTB143011 Bedienungsanleitung

Sealey

Sealey AP41104BWS Bedienungsanleitung

Sealey

Sealey AP4206BE.V2 Bedienungsanleitung

Sealey

Sealey AP6601.V2 Bedienungsanleitung

Sealey

Sealey APMS01 Bedienungsanleitung

Sealey

Sealey SM30.V2 Bedienungsanleitung

Sealey

Sealey AP5MB Bedienungsanleitung

Sealey

Sealey AP2200BB.V2 Bedienungsanleitung

Sealey

Sealey PTB66004SS Bedienungsanleitung

Sealey

Sealey AP4804SS Bedienungsanleitung

Sealey

Sealey AP02WC Bedienungsanleitung

Beliebte Werkzeugaufbewahrung Handbücher anderer Marken

Ryobi

Ryobi RWB03 Bedienungsanleitung

Husky

Husky H27CH5TR4BGK Bedienungsanleitung

Scheppach

Scheppach ts 2100 Bedienungsanleitung

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Bedienungsanleitung

Cassese

Cassese CS200 CART Bedienungsanleitung

Cornwell Tools

Cornwell Tools CTB360AKBK Bedienungsanleitung

Kendall Howard

Kendall Howard ESDW-9630-1000 Bedienungsanleitung

Lista

Lista Align Montageanleitung

Workzone

Workzone 99609 Bedienungsanleitung

Stanley

Stanley STST83800-1 Bedienungsanleitung

Homak

Homak PROFESSIONAL Series Systemhandbuch

Perel

Perel ROLLER SHUTTER STORAGE CABINET Bedienungsanleitung

Husky

Husky H5CH2R Bedienungsanleitung

BGS technic

BGS technic 4107 Bedienungsanleitung

Clarke

Clarke CWB1250 Bedienungsanleitung

Ryobi

Ryobi RWB02 Bedienungsanleitung

Husky

Husky H52CH6HDV3WHT Bedienungsanleitung

General International

General International Excalibur 40-100 Stücklistenhandbuch