Sealey MIG/N315 Bedienungsanleitung

INSTRUCTIONS FOR:

MIG TORCH EURO CONNECTOR

PART Nos: MIG/N315, MIG/N325, MIG/N336,

MIG/N415, MIG/N425, MIG/N436

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you

years of trouble performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.

USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE

AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

2. INTRODUCTION & SPECIFICATIONS

3. TIP & SHROUD REMOVAL

■ BEFORE USE, ALWAYS ENSURE THAT YOU ARE FAMILIAR WITH THE SAFETY WARNINGS AND INSTRUCTIONS FOR THE

WELDER TO WHICH THIS TORCH IS TO BE FITTED.

DO NOT exceed the rated current of the torch.

DO NOT use if any part of the torch, cable or connector is damaged in any way. Use only genuine Sealey replacement parts to effect

repairs.

DO NOT allow the cable to come into contact with any sharp or hot items.

 Alwaysusethecorrectpersonalprotectiveequipmentasspeciedinthewelderinstructions.

MIG/N315, MIG/N415 MIG/N336, MIG/N436

Professional MIG welding torches with contoured grip, hanging hook and heat-proof cable. Fitted with Euro connection enabling a quick and simple

plug connection to welder. No wiring means torch can be disconnected and stored safely when not being used.

Model No: .......MIG/N315........MIG/N325 ........MIG/N336.......MIG/N415 ...... MIG/N425 ....... MIG/N436

Rated Current: ....180A............230A............250A...........290A........... 340A ............350A

Wire Diameter:....0.6-1mm .........0.8-1.2mm .......0.8-1.2mm ......0.8-1.2mm ...... 0.8-1.6mm........1-2.4mm

Length:..........3mtr ............3mtr ............3mtr ...........4mtr ........... 4mtr.............4mtr

Torch Type: ......MB15 ...........MB25 ...........MB36 ..........MB15 .......... MB25 ...........MB36

MIG/N325, MIG/N425

ENSURE THAT THE TORCH IS COOL AND THAT THE WELDER IS DISCONNECTED FROM THE POWER SUPPLY.

3.1. MIG/N315, MIG/N415, MIG/N325, MIG/N425 (g.1)

3.1.1. To remove the shroud: turn the shroud clockwise and pull away.

3.1.2. To remove the tip: unscrew the tip in an anticlockwise direction.

3.1.3. To replace the tip: screw back in and tighten.

3.1.4. To replace the shroud: simply push the shroud back over the spring.

3.2. MIG/N336, MIG436 (g.2)

3.2.1. To remove the shroud: pull the shroud forward to release.

3.2.2. To remove the tip: unscrew the tip in an anticlockwise direction.

3.2.3. To replace the tip: screw back in and tighten.

3.2.4. To replace the shroud: push back over the torch head.

g.1

g.2

Original Language Version MIG/N315,MIG/N325,MIG/N336, Issue: 1- 28/02/14

MIG/N415,MIG/N425,MIG/N436

Jack Sealey Limited

WEEE Regulations.

Dispose of this product at the end of its working life in compliance

with the EU Directive on Waste Electrical and Electronic Equipment.

When the product is no longer required, it must be disposed of in an

environmentally protective way. Contact your local solid waste

authority for recycling information.

Environmental Protection.

Recycle unwanted materials instead of disposing of them as

waste. All tools, accessories and packaging should be sorted,

taken to a recycling centre and disposed of in a manner which

is compatible with the environment.

Ensure that the welder is disconnected from the power supply before connecting the torch.

4.1. Linethemaleandfemaleconnectorupcarefullyandinsertthetorchconnections.(g.3)

4.2. Screwtheoutercollararoundthetorchontotheweldertorchconnectortoxinplace.(g.4)

4.3. See the welder instructions for wire feed details.

4. COUPLING THE EURO CONNECTOR

g.3

g.4

NOTE: I

t is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

sales@sealey.co.uk

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business

Park, Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Original Language Version MIG/N315,MIG/N325,MIG/N336, Issue: 1- 28/02/14

MIG/N415,MIG/N425,MIG/N436

Jack Sealey Limited

Dieses Handbuch passt für folgende Modelle

Andere Sealey Schweißzubehör Handbücher

Sealey

Sealey SGA1.V4 Bedienungsanleitung

Sealey

Sealey Siegen Tools S01000.V2 Bedienungsanleitung

Sealey

Sealey SWH189 Bedienungsanleitung

Sealey

Sealey PWH620 Bedienungsanleitung

Sealey

Sealey GCSC219 Bedienungsanleitung

Sealey

Sealey PWH610 Bedienungsanleitung

Sealey

Sealey SHADE 10 Bedienungsanleitung

Sealey

Sealey SSP6 Bedienungsanleitung

Sealey

Sealey PWH599 Bedienungsanleitung

Sealey

Sealey PWH599 Bedienungsanleitung

Sealey

Sealey PWH599 Bedienungsanleitung

Sealey

Sealey WFS94X Bedienungsanleitung

Sealey

Sealey PWH399 Bedienungsanleitung

Sealey

Sealey SGA3 Bedienungsanleitung

Sealey

Sealey Siegen Tools S01001.V2 Bedienungsanleitung

Sealey

Sealey BTR4.V3 Bedienungsanleitung

Sealey

Sealey PWH616 Bedienungsanleitung

Sealey

Sealey SWT1120 Bedienungsanleitung

Sealey

Sealey VSAC135 Bedienungsanleitung

Sealey

Sealey MIG/LITE Bedienungsanleitung

Sealey

Sealey SGA3.V2 Bedienungsanleitung

Sealey

Sealey SR20.V2 Bedienungsanleitung

Sealey

Sealey PWH620.V2 Bedienungsanleitung

Sealey

Sealey PWH601 Bedienungsanleitung

Beliebte Schweißzubehör Handbücher anderer Marken

Lincoln Electric

Lincoln Electric LT-7 Tractor Bedienungsanleitung

Cornwell Tools

Cornwell Tools MMWC1 Bedienungsanleitung

Dohle

Dohle ExOn2A Bedienungsanleitung

Nederman

Nederman Fume Eliminator FE 840/2500/P150 Bedienungsanleitung

3M Speedglas 9100 Series Bedienungsanleitung

Miller Electric

Miller Electric OM-842 Bedienungsanleitung

Miller

Miller A-200 Series Bedienungsanleitung

Abicor Binzel

Abicor Binzel ABIMIG WT Series Bedienungsanleitung

Miller

Miller MIGmatic M-25 Bedienungsanleitung

Tregaskiss

Tregaskiss TOUGH GUN TT3 Reamer Bedienungsanleitung

Abicor Binzel

Abicor Binzel xFUME PRO Bedienungsanleitung

iWeld

iWeld NORED EYE Bedienungsanleitung

Sthor

Sthor 74483 Bedienungsanleitung

Leister

Leister TWINNY T7 Bedienungsanleitung

Miller

Miller I-22 CE Bedienungsanleitung

LAHTI PRO

LAHTI PRO L1540400 Bedienungsanleitung

Lincoln Electric

Lincoln Electric K3091-1 Bedienungsanleitung

Tregaskiss

Tregaskiss TOUGH GUN TT4E Bedienungsanleitung