Secabo C30III Bedienungsanleitung

OPERATING INSTRUCTIONS

for vinyl cutters

Secabo C30III, C60III and C120III

Congratulations on purchasing a Secabo vinyl cutter!

Please read these operating instructions thoroughly to ensure that you can start

production with your vinyl cutter without problems.

Reproduction of these operating instructions in any form requires written approval of

Secabo GmbH. e reserve all rights to change technical data and product features

without prior notice. Not liable for printing errors.

Secabo GmbH does not assume any liability for direct or indirect damage or injury

resulting from use of this product.

Version 1.7 (09.06.2010)

Table of Contents

Table of ContentsTable of Contents

Table of Contents

Safety Precautions

Safety PrecautionsSafety Precautions

Safety Precautions ................................

................................................................

...................................................

......................................

................... 2

Items Included

Items IncludedItems Included

Items Included ................................

................................................................

........................................................

................................................

........................ 3

Layout of Stand

Layout of StandLayout of Stand

Layout of Stand-

-Up

UpUp

Up-

-Base

BaseBase

Base................................

................................................................

..........................................

....................

.......... 4

Unit Description

Unit DescriptionUnit Description

Unit Description ................................

................................................................

......................................................

............................................

...................... 5

4.1

Unit Parts and Their Function.................................................................5

4.2

Side Views ...........................................................................................5

4.3

Control Panel.......................................................................................6

Starting Up Appliance and Software

Starting Up Appliance and SoftwareStarting Up Appliance and Software

Starting Up Appliance and Software ................................

................................................................

..........................................................

....................................................

.......................... 7

5.1

Starting Up Appliance...........................................................................7

5.2

Start-up of the device and software ........................................................7

5.3

Installation SignCut Productivity Pro .......................................................7

5.3.1

Installation of the device driver.........................................................8

5.3.2

Installation of the Secabo cutting plotter in SignCut Productivity Pro.....8

5.4

Installation of the Illustrator Export Plugins for CS2, CS3 and CS4............8

5.4.1

Import of an .eps file into SignCut Productivity Pro .............................9

5.5

Installing and Adjusting the Blade ..........................................................9

5.6

Inserting the Blade Holder...................................................................10

5.7

Inserting cutting vinyl ..........................................................................10

5.8

Cutting Test .......................................................................................11

Settings and Operation

Settings and OperationSettings and Operation

Settings and Operation ................................

................................................................

..........................................

....................

.......... 12

1212

6.1

Online/Offline ...................................................................................12

6.2

Moving the Cutting Head....................................................................12

6.3

Setting the Zero Point .........................................................................12

6.4

Changing ..........................................................................................13

6.5

Repeat Function .................................................................................13

6.6

Other Settings....................................................................................14

6.7

Limit Switches.....................................................................................14

Drag knifes

Drag knifesDrag knifes

Drag knifes ................................

................................................................

...........................................................

......................................................

........................... 15

1515

Technical Data

Technical DataTechnical Data

Technical Data................................

................................................................

......................................................

............................................

...................... 16

1616

Troubleshooting

TroubleshootingTroubleshooting

Troubleshooting ................................

................................................................

....................................................

........................................

.................... 17

1717

1Safety Precautions

Please read these instructions and safety precautions carefully before using your

vinyl cutter for the first time!

•Do not place any magnetic objects in the vicinity of the cutting head;

otherwise uniform contact pressure is not ensured.

•Do not remove the connection cable to the computer while plotting is in

progress.

•Relieve the pressure on the pressure rollers when not in use by moving the

pressure lever up.

•Do not reach into the unit with your hands when the power is connected.

•Never open the housing or attempt to modify the unit yourself.

•Ensure that liquids and metal objects do not get into the inside of the plotter.

•Ensure that the wall socket used is grounded and protected with a ground

fault switch.

•Ensure that the connected voltage (220V) does not deviate by more than

±10%. Otherwise install a voltage stabilizer.

•Disconnect the power cord when the unit is not used for a longer period of

time.

•Never reach into the unit in the vicinity of the blade holder during the cutting

operation!

•Discontinue any printing jobs in progress before readjusting the blade holder!

•Always ensure that the vinyl cutter is out of reach of children during operation

and never leave the unit or individual parts of it switched on without

supervision.

•Do not touch the tip of the sliding blade to avoid injury.

•Always place the unit on a stable base to prevent it from falling down.

•Do not operate the unit during thunderstorms; it can be damaged or

destroyed by lightning.

2Items Included

Before starting work, please check whether the following items are all present:

Item Quantit

Power cable 1

Serial connection

cable 1

USB connection

cable 1

Bladeholder 1

Penholder 1

45° drag knife 3

Pens 2

Secabo FlexiStarter 1

Stand-up-base

(not with C30III)

3Layout of Stand-Up-Base

Tools required: Phillips screwdriver, 13 mm wrench,

The stand-up base for your Secabo vinyl cutter can be assembled simply using the

parts supplied as shown in the exploded drawing above.

4Unit Description

4.1 Unit Parts and T eir Function

4.2 Side Views

USB-port, serial port

Power supply, fuse, switch

Blade Holder

Grid rollers

Control panel

Cutting head

Base

4.3 Control Panel

a) Online-/Offline button

b) Test button (blade test)

c) LCD display

d) Arrow keys for control of cutting head and for pulling in foil

e) Zero point button

f) Pause button (to interrupt plotting operation)

g) Repeat button for repeating a job

h) Menu button for appliance settings

5Starting Up Appliance and Software

5.1 Starting Up Appliance

Ensure that sufficient space is present for the foil transport in front of and in back of

the unit. The vinyl cutter should be operated only in clean and dry surroundings.

•Connect the plotter to a 220 V wall socket with the power cable provided.

•Then switch the plotter on. Caution! After switching on, the cutting head

initially moves to the right.

5.2 Start-up of t e device and software

Attention!

Attention! Attention!

Attention! Please consider that smooth installation and full configuration requires

Please consider that smooth installation and full configuration requires Please consider that smooth installation and full configuration requires

Please consider that smooth installation and full configuration requires

the prior installation of SignCut Productivity Pro.

the prior installation of SignCut Productivity Pro. the prior installation of SignCut Productivity Pro.

the prior installation of SignCut Productivity Pro.

5.3 Installation SignCut Productivity Pro

Your Secabo cutting plotter is delivered along with the cutting plotter software

SignCut Productivity Pro with Bundle Registration Code. Please sign in on

http://www.signcutpro.com/ under „Register Bundle“ to install SignCut Productivity

Pro. After entry of the Bundle Registration Code the licence number is created and

displayed subsequently. Please state the licence number to activate the licence;

SignCut Productivity Pro is then subsequently active for 12 months. Directly after

licence activation you can also set the device beforehand, but it can only be

controlled after the device driver has been installed. Basic requirement for the

production with Signcut is common graphics software like for example Adobe

Illustrator or Corel Draw. A simple creation of vector graphics is also possible with

the Open Source Software Inkscape.

5.3.1 Installation of t e device driver

•Insert the Secabo CIII Driver CD into your CD drive.

•Select the driver necessary for your Mac OSX Version (Intel or power PC) in

the folder Mac OSX/Drivers.

•Activate the .dmg file by clicking on it, and click on the FTDIUSBSerialDriver

file several times.

•Follow the installation steps by entering your user password.

•You are asked to restart your computer, subsequently the device driver is fully

installed.

5.3.2 Installation of t e Secabo cutting plotter in SignCut Productivity Pro

•Open SignCut Productivity Pro, and select the button „Plotter“.

•Select the manufacturer, device type, and the device like the illustrated notice

/dev/cu.usbserial-ftE2MSR0 and click on OK.

5.4 Installation of t e Illustrator Export Plugins for CS2, CS3 and CS4

•Insert the included Secabo CIII Driver CD into your CD- drive.

•Select the file Signcut.aip in the folder MacOSX/Illustrator Export Plugin .

•Copy it into Adobe Illustrator CS3/Additional modules/Tools for example

Adobe Illustrator CS3 .

•Created vector graphics can then be exported directly to SignCut with this

command.

•Subsequently the Plugin is active under the menu file/Send to Signcut (see

illustration below).

5.4.1 Import of an .eps file into SignCut Productivity Pro

•Using the menu command Open File you load a vector graphic in .eps

format into SignCut

5.5 Installing and Adjusting t e Blade

•Take one of the cutting blades supplied and place it in the blade holder so

that the sharp side extends at the front. The blade is held by a magnet in the

blade holder.

•Adjust the cutting depths by turning the front cap.

•The depth is initially set correctly when you can carefully move your fingertip

across the blade and feel only a light scratching. Since the depth adjustment

for the blade depends on the material, it may be necessary to change it later

(as a rule 0.05 mm to 0.1 mm).

Andere Handbücher für C30III

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Secabo Cutter Handbücher

Secabo

Secabo FC50 Bedienungsanleitung

Secabo

Secabo CIII Bedienungsanleitung

Secabo

Secabo T60 Bedienungsanleitung

Secabo

Secabo SC30 Bedienungsanleitung

Secabo

Secabo T60 II Bedienungsanleitung

Secabo

Secabo C60 V Bedienungsanleitung

Beliebte Cutter Handbücher anderer Marken

Milwaukee

Milwaukee HEAVY DUTY M12 FCOT Bedienungsanleitung

Makita

Makita DCS552 Bedienungsanleitung

SignWarehouse.com

SignWarehouse.com Bobcat BA-60 Bedienungsanleitung

Makita

Makita 4112HS Bedienungsanleitung

GEISMAR STUMEC

GEISMAR STUMEC MTZ 350S Bedienungsanleitung

Hitachi

Hitachi CM 4SB2 Fehlerbehebungshandbuch

Dexter Laundry

Dexter Laundry 800ETC1-20030.1 Bedienungsanleitung

GCC Technologies

GCC Technologies AFJ-24S Bedienungsanleitung

DeWalt

DeWalt XR LI-ION DCS350N Bedienungsanleitung

Baudat

Baudat ES1 Bedienungsanleitung

Mafell

Mafell ZAF 200 Leitfaden

Makita

Makita 4100NH Bedienungsanleitung

Formax

Formax FD 574 Bedienungsanleitung

EINHELL

EINHELL TE-MA 1500 Bedienungsanleitung

Husqvarna

Husqvarna Cut-n-Break K 760 Bedienungsanleitung

CLEAN ROOM DEVICES

CLEAN ROOM DEVICES CRD130SS Bedienungsanleitung

TRI tool

TRI tool 301A Bedienungsanleitung

Roller

Roller King 1 1/4 Bedienungsanleitung