Seeed studio ReTerminal DM-R100 Bedienungsanleitung

reTerminalDM_ACD_GettingStarted.md 2023/6/5

1 / 5

Run Azure IoT Edge Runtime on reTerminal DM device

running Debian 11 (ARM32v7)

Table of Contents

Introduction

Step 1: Prerequisites

Step 2: Prepare your Device

Step 3: Manual Test for Azure IoT Edge on device

Step 4: Additional information

Step 5: Additional Links

Introduction

reTerminal DM is a Panel PC, HMI, PLC, IIoT Gateway all-in-one device powered by Raspberry Pi CM4, with

10.1'' IP65 front panel and rich industrial interfaces, and natively integrated with Node-RED and supports

Raspberry Pi-based software ecosystem.

This document describes how to connect reTerminal DM device running Debian 11 (ARM32v7) with Azure IoT

Edge Runtime pre-installed and Device Management. This multi-step process includes:

Configuring Azure IoT Hub

Registering your IoT device

Build and Deploy client component to test device management capability

Step 1: Prerequisites

reTerminalDM_ACD_GettingStarted.md 2023/6/5

2 / 5

You should have the following items ready before beginning the process:

Create an Azure account

Setup your IoT hub

Add the Edge Device

Add the Edge Modules

Step 2: Prepare your Device

1. Power on the device. Connect a 12~24V power supply to the 2-pin power terminal block connctor.

2. Check the OS version, bit number and architecture.

$ lsb_release -irc

Distributor ID: Raspbian

Release: 11

Codename: bullseye

$ getconf LONG_BIT

$ uname -m

armv7l

If your OS is older than Debian 11 (Bullseye) or LOG_BIT is 64, please install latest Raspberry Pi OS 32-

bit. Refer to Steps for Flashing Raspbian OS.

If uname -m is aarch64, your OS running 64-bit kernel. Please change to 32-bit kernel. Refer to 32-bit

OS driver.

Step 3: Manual Test for Azure IoT Edge on device

3.1 Edge Runtime Enabled

1. Register your device

2. View registered devices and retrieve provisioning information

reTerminalDM_ACD_GettingStarted.md 2023/6/5

3 / 5

3. Install IoT Edge

$ curl https://packages.microsoft.com/config/debian/11/packages-microsoft-

prod.deb > ./packages-microsoft-prod.deb

$ sudo apt install ./packages-microsoft-prod.deb

$ rm ./packages-microsoft-prod.deb

4. Install a container engine

$ sudo apt-get update

$ sudo apt-get install moby-engine

$ sudo vi /etc/docker/daemon.json

$ sudo systemctl restart docker

Set the default logging driver to the local logging driver as shown in the example below.

{

"log-driver": "local"

}

5. Install the IoT Edge runtime

$ sudo apt-get update

$ sudo apt-get install aziot-edge defender-iot-micro-agent-edge

6. Provision the device with its cloud identity

$ sudo iotedge config mp --connection-string 'PRIMARY_CONNECTION_STRING'

$ sudo iotedge config apply

3.2 Check the iotedge daemon

Open the command prompt on your IoT Edge device , confirm that the Azure IoT edge Daemon is under

running state

sudo iotedge system status

reTerminalDM_ACD_GettingStarted.md 2023/6/5

4 / 5

Open the command prompt on your IoT Edge device, confirm that the module deployed from the cloud is

running on your IoT Edge device

$ sudo iotedge list

On the device details page of the Azure, you should see the runtime modules - edgeAgent, edgeHub and

SimulatedTemperatureSensor modules are under running status

Step 4: Additional information

reTerminal DM Getting Started

Step 5: Additional Links

reTerminalDM_ACD_GettingStarted.md 2023/6/5

5 / 5

What is Azure IoT Edge

Azure IoT Edge supported platforms

Develop your own IoT Edge modules

Inhaltsverzeichnis

Andere seeed studio Touchscreen Handbücher

seeed studio

seeed studio reTerminal DM Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung

B&R Industries

B&R Industries MAPPC900-ENG Bedienungsanleitung

seeed studio reTerminal DM-R100 Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken