Seenergy NVR-304 Basic Bedienungsanleitung
Entry-Level 4 Channel
Network Video Recorder
Quick Guide v1.6.0
NVR-304 Basic NVR4CH Basic
EN/QV16/09012010/001
Contents
Purpose 3
Package Contents 3
Hardware Illustration 4
NVR4CH Basic 4
NVR-304 Basic 5
LEDs and Buttons 6
Hard Drive Installations 8
NVR4CH Basic 8
NVR-304 Basic 9
Connect to the NVR 10
Set up Password 14
Add a Camera 15
Recording Congurations 17
Quick Installation Guide
English
3
4 Channel (Basic)
Network Video Recorder
Purpose
This document provides information for installing the 4CH Basic Net-
work Video Recorder on your network. The information included in this
document should be sufcient for users to quickly setup the device and
start the live video monitoring. Users should also be able to perform
basic troubleshooting with information provided in this document. For
all other aspects of using this product, please consult the user’s manual
available on the CD
Package Contents
• 4CHBasicNetworkVideoRecorder
• PowerAdapter:Input100-240V,Outpupt
+5V/4.2A,+12V/3A
• Ethernetcable
• PrintedQuickInstallationGuide
• PrintedWarrantyCard
• CDwithAdobeAcobatReader/QuickInstallation
Guide/User’s Manual/NVR Search Utility
Quick Installation Guide
English
4 Channel (Basic)
Network Video Recorder
4
HardwareIllustration
(Front)
(Rear)
Manual Recording button
(Manual Recording)
NVR4CH Basic
Quick Installation Guide
English
5
4 Channel (Basic)
Network Video Recorder
(Front)
(Rear)
HDD Tray
HDD Tray
Power button
and LED
HDD LEDs
USB Connector
Power jack
Ethernet jack
USB connector
Reset/Restart but-
ton
NVR-304 Basic
Quick Installation Guide
English
4 Channel (Basic)
Network Video Recorder
6
LEDsandButtons
OSLED
Solid green: System ready
Off: System Off
Blinking:
1. System shutting down
2. Upgrading rmware
a) Through USB drive: Blinking indicating the upgrade is in pro-
cess. Once rmware upgrade completes, the LED goes off. Manually turn
off the power and turn it back on would be required afterwards.
b) ThroughthewebUI: Blinking indicating the upgrade is in pro-
cess. Once rmware upgrade completes, the LED goes off. The NVR will
then restart automatically. Once it nishes restarting, the LED should turn
to solid green to indicate the system is now ready.
3. Restoring previously saved conguration le
a) Through USB drive: The LED should blink to indicate the process
has started. The LED will then go off to indicate the process is complete.
Manually turn off the power and turn it back on would be required after-
wards.
b) ThroughWebUI: The LED should blink to indicate the process
has started. The LED will then go off to indicate the restoring is complete
and the system is restarting. The OS LED should indicate in solid green
once the system becomes ready.
RecordingLED
Solidamber: recording
Off: not recording
Blinking: Manual recording:
When “manual recording button” is pressed
* To start manual recording with the “manual recording button”, press and hold
the button for 2 seconds then release it. Follow the same procedure to stop.
Power Button: (Blue when ON) Press to turn on/off the system
FrontLEDs:
Quick Installation Guide
English
7
4 Channel (Basic)
Network Video Recorder
Restart Button
Press and release the button for hardware re-
start. The OS LED should should go off during the
restart to indicate the system is restarting. The
LED should indicate in solid green once the sys-
tem becomes ready.
Reset Button
Press this button will restore the system’s set-
tings to factory default values. To start, press and
hold the button for 5 seconds then release it once
the OS LED goes off. The OS LED should indicate
in solid green once the system becomes ready.
EthernetPortLED
The green LED on the left indicates the link connection and the LED on the
right indicates the speed
Quick Installation Guide
English
4 Channel (Basic)
Network Video Recorder
8
HardDriveInstallations
1. Remove the four screws
from the bottom of the case.
2. Push the inner enclosure
out, and remove the outer
chassis.
3. Install the rst hard drive
by placing it in the enclosure
and connecting the SATA plus
power cables.
4. Mount the drive with two
screws on each side.
5. Attach the thermal probe
with the tape provided to the
rst hard drive.
Choose a location in between
the two drives but without
damaging the thermal probe
when installing the second
drive.
6. Install the second hard drive
by placing it in the enclosure
and connecting the SATA plus
power cables.
NVR4CH Basic
Quick Installation Guide
English
9
4 Channel (Basic)
Network Video Recorder
1. Push the silver button to
release the HDD tray
2. Pull out the HDD tray
3. Place the HDD on the tray
and secure the HDD with the
screws at the bottom (as illus-
trated)
4. Push the tray back in the
unit and press down the black
bar to secure the tray
NVR-304 Basic
Quick Installation Guide
English
4 Channel (Basic)
Network Video Recorder
10
Connect to the NVR
There are various ways you can connect to the NVR and below are
the suggested methods for different network setup:
• The NVR is placed in a network with a DHCP server: Connect to
the NVR by using “NVR Search” Utility
• The NVR is placed in a network without DHCP server (or you are
connecting to it directly): Accessthe NVRwithitsdefaultIP
UseNVRDeviceSearchUtility
If the NVR is placed in a corporate network or a local area network
where a DHCP server is already presented, run the “NVR Device
Search” utility from a computer that is on the same network and
locate the NVR with its IP address that is assigned by the top-level
DHCP server.
To begin, launch the “NVR Search” utility from the CD and proceed
with the installation:
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Seenergy Netzwerk-Hardware Handbücher
Seenergy
Seenergy SVR-808e Bedienungsanleitung
Seenergy
Seenergy SVR-504 Bedienungsanleitung
Seenergy
Seenergy SVR-632/664 Bedienungsanleitung
Seenergy
Seenergy SVR-204 Bedienungsanleitung
Seenergy
Seenergy SVR-304 Basic Bedienungsanleitung
Seenergy
Seenergy SVR-104 Bedienungsanleitung
Seenergy
Seenergy SVR-816 Bedienungsanleitung
Seenergy
Seenergy SVR-104 Bedienungsanleitung
Seenergy
Seenergy SVD-832 Bedienungsanleitung
Seenergy
Seenergy SVR-116 Plus Bedienungsanleitung
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
