9
or didn't read card; green light flash to indicate the GPS no
positioning; if the light continuously says working properly, five
minutes after the light will put out; if want to see the light condition,
you should call the number of equipment, the light will open again.
6.5.4. When the equipment GSM working normaly,you can set up any
instruction in the manual.
7.0 The Device Working
7.1Power on: The device will be power on when connecting to the current..
Then the red power light indicators will light continuously. Green
GPS light shining (saids GPS already positioning), red GSM lamp
shining (saids SIM card work normal). The terminal every time
(the default 20 s) service platform to upload a current position
information, when vehicle long time in static state, terminal will
automatically enter the energy saving mode and start static drift
inhibition mechanism, thus effectively control GPS static drift data
problem, make the terminal work more save electricity, more
intelligent, more accurate path.
7.2 Power off：Pull off the power plug then power off the device.
7. 3 ACC detection：Testing wether the automobile power is open, Can
be in platform shows that ACC state.
8. SOS alarm
Hold the SOS switch button for 2 seconds and began to platform alarm cycle
call administrator and authorization number, until the phone get through. It
will automatic hang up after 3 minutes.
9. Power-off alarm
When the equipment of power supply is cut off, then to the administrator or
authorization number send cut-off warning information, "please note, the
power supply has been cut off!"
