Sequencer COMPACT
Technical brochure
FI 72.0467.0118E
Page 2 / 42
DESCRIPTION
Sequencer COMPACT is an adjustable device for control
and full automatization of dedusting equipments, whose
declogging is done by pressured air injections.
Permanent control of differential pressure allows an optimal
efficiency according to the whole parameters for any type of
exploitation and product.
It is equipped of a MOTHER card and from 1 to 8
SEQUENCER cards
The system can manage up to 128 solenoïd valves (SV),
(8 SEQUENCER cards of 16 solenoïds valves) with a
control of electric fault on each SV card.
The system has :
- 4 TOR inputs: run order, compressed air presence, T2A
time (accelerated declogging ) and forced running.
- 1 analog input 4-20mA allowing reception of datas from
one system equipped with 4-20mA output,
- 4 RELAY output: general fault, high alarm dP, analog
input alarm and running order response.
- 1 COM. CDM allowing management of a dust sensor
CDM.
- 1 analog output 4-20mA for report of measure of pressure
loss value dP.
The device is adjustable according to the use of it, with
several protection levels by passwords.
All the running parameters can be seen and adjusted from
the front panel, through a color touch screen. Interface is
multilingual.
The Evolutions of declogging cycle and analog input,
running faults, dust and pressure measures are clearly
displayed.
A graphic representation of pressure, dust rejection and
analog input allows an easy control of their level.
An USB key can be plugged to the device and the user can
record all historical measures of sensors and all the faults.
The device also has counters of cycles done and
recordings of mini and maxi measured pressures.
SUMMARY
DESCRIPTION Page 2
CHARACTERISTICS Page 3
DIMENSIONS AND MOUNTING Page 4
PROTECTION Page 5
CONNECTIONS
MOTHER CARD Page 6
SEQUENCER DC CARD Page 8
SEQUENCER AC CARD Page 10
USER INTERFACE
Main page / Synoptic Page 12
In case of fault Page 13
Running fault page Page 14
Sequencer information page Page 15
Informations page pressure dP Page 16
Pressure dP graph Page 17
CDM informations dust sensor Page 18
Graph Dust Page 19
Dust measure
Graph
Analog input measure Page 20
Page Main Menu Page 21
Page Password setting Page 22
Page HMI Parameters Menu Page 23
Page Langage Menu Page 24
Page Manual Mode Menu Page 25
Page Info System Menu Page 26
Page
Faults History
Page 27
Page Parameters Page 28
Page Parameters Fan Page 29
Page Parameters Sequencer Page 30
Page Parameters CDM Page 32
Page Parameters Pressure Switch Page 33
Page Parameters Analog Input Page 34
Page Process/Modbus Link Page 35
FAULTS Page 36
RUNNING Page 38
RELAY OUTPUT Page 39
WARNING / CALIBRATION
Page 40
GENERAL INSTRUCTIONS OF Page 41
SAFETY,ASSEMBLY,
COMMISSIONNING AND
MAINTENANCE
WARRANTY Page 42
CONFORMITY Page 42
