Sega DRONE RACING GENESIS Bedienungsanleitung

IMPORTANT

• Before using this product, read this Manual carefully to understand

the contents herein stated

•After reading this Manual, be sure to keep it near the product or in a

convenient place for easy reference when necessary

OWNER'S MANUALDrone racing genesis 420-0039UK

Sega Amusements International Limited.

42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.

Telephone: +44 (0) 208 391 8090 Facsimile: +44 (0) 208 391 8099

email: [email protected] Web: http://www.segaarcade.com

Errors & Omissions Excepted (E&OE)

420-0039UK

2ND PRINTING

INTRODUCTION

This Manual is intended to provide detailed descriptions together with all necessary information covering the general

operation of electronic assemblies, electromechanical, servicing control, spare parts, etc. for the product:

"DRONE RACING GENESIS"

This Manual is intended for the owners, personnel managers in charge of operation of this product.

Operate the product after carefully reading and suciently understanding the instructions.

In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician

to touch the internal system. Turn o the power to the machine, making sure to unplug the electrical cord from the

outlet, and contact the oce listed below or the point-of-purchase for this product.

Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special

attention are indicated by bold text, the words "STOP”, “IMPORTANT” or “CAUTION” and the symbols below.

Indicates important information that, if ignored, may result in the mishandling

of the product and cause faulty operation or damage to the product

Indicates a warning or caution that, if ignored, may result in the mishandling

of the product and cause faulty operation or damage to the product

Sega Amusements International Limited

42 Barwell Business Park,

Leatherhead Road,

Chessington, Surrey,

KT9 2NY

United Kingdom

European Sales: +44 (0)208 391 8090 Email: [email protected]

USA Sales: +00 (1) 224 265 4287 Email: [email protected]

STS (Spares): +44 (0) 208 391 8060 (Option 1) Email: [email protected]

Tech Support: +44 (0)208 391 8060 (Option 2) Email: [email protected]

Prize & Merchandise: +44 (0)208 391 8060 (Option 1) Email: [email protected]

Web: http://www.segaarcade.com

INTRODUCTION

iii

Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel

or other qualied professionals. This Manual includes directions for potentially dangerous procedures which should

only be carried out by professionals with the appropriate specialised knowledge.

The Site Maintenance Personnel or other qualied professionals mentioned in this Manual are dened as follows:

Site Maintenance Personnel:

Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the

supervision of the owner/operator of this product to maintain machines within amusement facilities or similar

premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/

expendable parts.

Activities to be carried out by Site Maintenance Personnel:

Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable

parts.

Other qualied professionals:

Persons employed by amusement equipment manufacturers, or involved in design, production, testing or

maintenance of amusement equipment. The individual should have either graduated from technical school or hold

similar qualications in electrical/electronics/mechanical engineering.

Activities to be carried out by other qualied professionals:

Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

Denition of 'Site Maintenence Personnel’ or Other Qualied IndividualsDenition of 'Site Maintenence Personnel’ or Other Qualied Individuals

Electrical & Mechanical SpecicationsElectrical & Mechanical Specications

Procedures not described in this Manual or marked as ‘to be carried out by Site

Maintenance Personnel or other qualied professionals’ should not be carried

out by personnel without the necessary skill or technological experience. Work

carried out by unqualied persons may cause serious accidents, including

electrocution.

Standard Cabinet

Machine Dimensions: 1.07m (42.1in) [Width] x 1.83m (72.1in) [Depth]

Machine Height: 2.41m (94.8in) (Installed)

Machine Weight: 358kg Approx (Installed)

Power, maximum current: -350w-

Rating: 115/230VAC @ 50/60Hz

Fuse Rating: 3.15A

SPECIFICATIONS

INTRODUCTION

Monitor Cabinet Seat Cabinet

Billboard

H = 1.88m

L = 0.91m W = 1.07m

L = 0.92m

W = 0.85m

H = 1.17m

H = 0.53m

L = 0.41m

W = 0.99m

INDIVIDUAL SPECIFICATIONS

INTRODUCTION

Waste of Electrical and Electronic Equipment (WEEE) StatementWaste of Electrical and Electronic Equipment (WEEE) Statement

The WEEE (Waste of Electrical and Electronic Equipment) directive places an obligation on all EU based

manufacturers and importers of Electrical and Electronic Equipment (EEE) to ensure waste equipment is disposed of

in accordance with the directive at the end of their useful life.

The symbol shown below will be placed on all products manufactured from 13th August 2005, which indicates this

product must NOT be disposed of with other normal waste. Upon purchasing any EEE from SEGA Amusements

International Ltd. The user accepts responsibility to dispose of their waste equipment by arranging to return it to a

designated UK collection point (AATF) or an Approved Exporter (AE) for the correct recycling of waste electrical

and electronic equipment.

For more information on Approved Authorised Treatment Facilities (AATF) within the UK please consult the

government website www.gov.uk

For users outside of the UK EEE should be disposed of in accordance with the local policy on the recycling of Waste

Electrical and Electronic Equipment.

Battery Recycling StatementBattery Recycling Statement

The EC Directive on Batteries and Accumulators (2006/66/EC) aims to minimise the impact of batteries on

the environment and encourage the recovery of the materials they contain. To achieve increased collection and

recycling of waste batteries, the Directive places ‘producer responsibility’ obligations on manufacturers and

importers of portable, industrial and automotive batteries.

The symbol shown below will be on all equipment tted with batteries from 26th September 2008 and indicates

they must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of used

batteries by arranging to return them to a designated collection point for the correct recycling.

For more information about where you can send your waste batteries for recycling contact your local authority

oce.

REGISTERED IN ENGLAND REGISTERED NO. 1711515

REGISTERED OFFICE: BLOCK C 42 BARWELL BUSINESS PARK, CHESSINGTON, SURREY KT9 2NY

TABLE OF CONTENTS

INTRODUCTION iii

HANDLING PRECAUTIONS 1

PRECAUTIONS REGARDING INSTALLATION 5

PRECAUTIONS REGARDING OPERATION

3-1 Before Operation

3-2 Paying Attention to Customers

PARTS DESCRIPTION 12

ACCESSORIES 13

ASSEMBLY AND INSTALLATION

6-1 Installing the Seat Cabinet

6-2 Installing the Billboard

6-3 Fixation to Site

6-4 Conﬁrmation of Installation

6-5 Components that Change State

6-6 Linking Multiple Cabinets

PRECAUTIONS WHEN MOVING

7-1 Moving the Machine

GAME DESCRIPTION

8-1 Game Outline

8-2 Game Flow

TEST AND SERVICE DATA

9-1 Switch and Coin Meter

9-2 Game Test Mode

9-3 System Information

9-4 Input Test

9-5 Output Test

9-6 Calibration Test

9-7 Coin Test

9-8 Sound Test

9-9 Screen Test

9-10 Network Test

9-11 Bookkeeping

9-12 Clock Test

9-13 Game Assignments

MONITOR

10-1 General Description

10-2 Cleaning the Screen

10-3 On-Screen Adjustment Method

CONTROLLER UNIT

11-1 Replacing the Joystick

11-2 Greasing

1010

1111

COIN HANDLING

12-1 Cleaning the Coin Selector

12-2 Fault Finding

12-3 Adjusting the Price of Play (Excel)

12-4 Coin Region & Price of Play Settings

12-5 Price of Play Quick Start (USA)

LAMPS AND LIGHTING

13-1 Coin Door Lamp

13-2 Cabinet LED List

13-3 LED Diagrams

PERIODIC INSPECTION 78

TROUBLE SHOOTING

15-1 Troubleshooting (No Error Message)

GAME BOARD

16-1 How to Remove Game Board

DESIGN RELATED PARTS 85

PARTS LIST 86

COLOUR CODE 116

SCHEMATIC DIAGRAM 117

1212

1313

1414

1515

1616

1717

1818

1919

2020

BEFORE USING THE PRODUCT,

BE SURE TO READ THE FOLLOWING:

To maintain safety:

To ensure the safe operation of this product, be sure to read the following before usage:

The following instructions are intended for the users, operators and the personnel in charge of the

operation of the product. After carefully reading and suciently understanding the warning displays

and cautions, handle the product appropriately. Be sure to keep this Manual close to the product or

in a convenient place for future reference.

Herein, explanations which require special attention are enclosed with dual lines. Depending on

the potentially hazardous degrees, the terms of "DANGER", "WARNING", "CAUTION", etc. are

used. Be sure to understand the contents of the displays before reading the text.

Indicates that mishandling the product by disregarding this pictograph will

cause severe injury or death.

Indicates that mishandling the product by disregarding this warning will cause

a potentially hazardous situation which can result in death or serious injury.

Indicates that mishandling the product by disregarding this caution will cause

a slight hazardous situation which can result in personal injury and/or material

damage.

For the safe usage of the product, the following pictographs are used:

Indicates "HANDLE WITH CARE." In order to protect the human body and equipment,

this display is attached to places where the instruction manual should be referred to.

Indicates a "protective earth terminal." Before operating the equipment, be sure to connect

it to the ground (this step may be omitted for products in which a power cable with earth is

used).

• Perform work in accordance with the instructions herein stated

Instructions for work are explained by paying attention to the aspect of accident prevention.

Failing to perform work as per the instructions can cause accidents. In the case where only

those who have technical expertise should perform the work to avoid hazardous situation, the

instructions herein state that the site maintenance personnel should perform such work

• Be sure to turn o󰀨 the power before working on the machine

To prevent an electric shock, be sure to turn o the power and unplug the power cable before

carrying out any work that requires direct contact with the interior of the product. If the work is

to be performed in the power-on status, the instruction manual herein always states to that eect

• Be sure to ground the earth terminal (this is not required in the case where a

power cable with earth is used)

This product is equipped with the earth terminal. When installing the product, connect the earth

terminal to the "accurately grounded indoor earth terminal" by using an earth wire. Unless the

product is grounded appropriately, the user can be subject to an electric shock. After performing

repair, etc. for the control equipment, ensure that the earth wire is rmly connected to the control

equipment

• Ensure that the power supply used is equipped with an earth leakage breaker

Using a power supply which is not equipped with the earth leakage breaker can cause a re when

earth leakage occurs

• Be sure to use fuses which meet the specied rating (only for the machines which

use fuses)

Using fuses exceeding the specied rating can cause a re and an electric shock

• Specication changes (removal of equipment, conversions and additions) not

designated by SEGA are not allowed

The parts of the product include warning labels for safety, covers for personal protection, etc. It

is very hazardous to operate the product by removing parts and/or modifying the circuits. Should

doors, lids and protective parts be damaged or lost, refrain from operating the product, and

contact where the product was purchased from or the oce herein stated.

SEGA shall not be held responsible for any accidents or compensation for damage to a third

party resulting from the specications not designated by SEGA

• Ensure that the product meets the requirements of appropriate electrical

specications

Before installing the product, check for electrical specications. SEGA products have a

nameplate on which the electrical specications are described. Ensure that the product is

compatible with the power supply voltage and frequency requirements of the location. Using

any electrical specications dierent from the designated specications can cause a re and an

electric shock

• Install and operate the product in places where appropriate lighting is available,

allowing warning labels to be clearly read

To ensure safety for the customers, labels and printed instructions describing potentially

hazardous situations are applied to places where accidents can be caused. Ensure that where the

product is operated has sucient lighting allowing the warnings to be read. If any label is peeled

o, apply it again immediately. Please place an order with where the product was purchased from

or the oce herein stated

• When handling the monitor, be very careful (applies only to products with

monitors)

Some of the monitor parts are subject to high tension voltage. Even after turning o the power,

some portions are still subject to high tension voltage. Monitor repair and replacement should

be performed only by those technical personnel who have knowledge of electricity and technical

expertise

• Be sure to adjust the monitor properly (applies only to products with monitors)

Do not operate the product leaving on-screen ickering or blurring as it is. Using the product

with the monitor not properly adjusted may cause dizziness or a headache to an operator, a

player, or customer

• When transporting or reselling this product, be sure to attach this Manual to the

product

* In the case where commercially available monitors and printers are used in this product, only the

contents relating to this product are explained herein. Some commercially available equipment

has functions and reactions not stated in this manual. Read this manual together with the specic

instruction manual of such equipment

* Descriptions herein contained may be subject to improvement changes without notice

* The contents described herein are fully prepared with due care. However, should any question

arise or errors be found, please contact SEGA

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION

Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately

after transporting to the location. Nevertheless, an irregular situation may occur during

transportation. Before turning on the power, check the following points to ensure that the product

has been transported in a satisfactory status:

Are there any dented portions or defects (cuts, etc.) on the external surfaces of the Cabinet?

Are castors and adjusters damaged?

Do the power supply voltage and frequency requirements meet with those of the location?

Are all wiring connectors correctly and securely connected? Unless connected in the correct

way, connector connections can not be made accurately. Do not insert connectors forcibly.

Do power cables have cuts and dents?

Are all accessories available?

 Canalldoorsandlidsbeopenedwiththeaccessorykeys?Candoorsandlidsbermlyclosed?

HANDLING PRECAUTIONS

1HANDLING PRECAUTIONS

When installing or inspecting the machine, be mindful of the following points and pay attention to ensure that the

player can enjoy the game safely.

Noncompliance with the following points or inappropriate handling running counter to the cautionary matters herein

stated can cause personal injury or damage to the machine.

• Before performing work, be sure to turn the power off. Performing the work

without turning the power off can cause an electric shock or short circuit.

In cases where work should be performed in the status of power on, this

manual always states to that effect

• To avoid an electric shock or short circuit, do not plug in or unplug quickly

• To avoid an electric shock, do not plug in or unplug with a wet hand

• Do not expose power cords or earth wires on the surface, (oor, passage,

etc). If exposed, the power cords and earth wires are susceptible to

damage. Damaged cords and wires can cause an electric shock or short

circuit

• To avoid causing a re or an electric shock, do not put things on or damage

the power cords

• During or after installing the product, do not unnecessarily pull the power

cord. If damaged, the power cord can cause a re or an electric shock

• In the case that the power cord is damaged, ask for a replacement through

where the product was purchased from or the ofce herein stated. Using

the cord as is damaged can cause re, an electric shock or leakage

• Be sure to perform grounding appropriately. Inappropriate grounding can

cause an electric shock

• Be sure to use fuses meeting the specied rating. Using fuses exceeding the

specied rating can cause a re or an electric shock

• Be sure that connections such as IC BD are made properly. Insufficient

insertion can cause an electric shock

• Specication changes, removal of equipment, conversion and/or addition,

not designated by SEGA are not permitted

• Failure to observe this may cause a fire or an electric shock. Non-

compliance with this instruction can have a bad influence upon the

physical conditions of players or onlookers, or result in injury during play

• SEGA shall not be held responsible for damage or compensation for

damage to a third party caused by specication changes not designated

by SEGA

• Do not perform any work or change parts not listed in this manual. Doing so

may lead to an accident

• If you need to perform any work not listed in this manual, request work from

the ofce indicated in this Manual or the point of purchase, or inquires for

details. Be sure to perform periodic maintenance inspections herein stated

Inhaltsverzeichnis

Andere Sega Arcade-Spielautomat Handbücher

Sega

Sega PIRATES of MONSTER ISLAND Bedienungsanleitung

Sega

Sega Let's Go ISLAND! Bedienungsanleitung

Sega

Sega Bass Fishing STD Bedienungsanleitung

Sega

Sega Olle King Bedienungsanleitung

Sega

Sega TOP SKATER Bedienungsanleitung

Sega

Sega Virtua Tennis 4 Bedienungsanleitung

Sega

Sega Virtua Cop 3 Bedienungsanleitung

Sega

Sega Outrun 2 Beilage

Sega

Sega Capcom vs SNK 2 Fehlerbehebungshandbuch

Sega

Sega Virtua Fighter 4 Evolution Fehlerbehebungshandbuch

Sega

Sega House Of The Dead Scarlet Dawn Bedienungsanleitung

Sega

Sega Crazy Taxi Bedienungsanleitung

Sega

Sega VIRTUA COP Bedienungsanleitung

Sega

Sega TARGET BRAVO OPERATION GHOST Bedienungsanleitung

Sega

Sega World Club Champion Football European Clubs... Bedienungsanleitung

Sega

Sega Ghost Squad Bedienungsanleitung

Sega

Sega Racing Classic Bedienungsanleitung

Sega

Sega Dinosaur King Bedienungsanleitung

Sega

Sega Showdown Bedienungsanleitung

Sega

Sega Sonic Allstarts Bedienungsanleitung

Sega

Sega AV F-ZERO AX Bedienungsanleitung

Sega

Sega AFTER BURNER CLIMAX Bedienungsanleitung

Sega

Sega LINDBERGH RED Bedienungsanleitung

Sega

Sega Daytona Championship USA Bedienungsanleitung

Beliebte Arcade-Spielautomat Handbücher anderer Marken

Universal Space

Universal Space COCONUT BASH Bedienungsanleitung

Bay-Tek

Bay-Tek EVOLVE Bedienungsanleitung

Global VR

Global VR America's Army Montage- und Bedienungsanleitung

Atronic

Atronic Cashline Bedienungsanleitung

Universal Space

Universal Space Checky Monkey Bedienungsanleitung

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Bedienungsanleitung

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Bedienungsanleitung

Family Fun Companies

Family Fun Companies Reactor Kurzanleitung

Universal Space

Universal Space FRUIT MANIA Extreme Bedienungsanleitung

falgas

falgas CARRUSEL FIESTA Bedienungsanleitung

Konami

Konami DanceDanceRevolution Bedienungsanleitung

Bay-Tek

Bay-Tek quik drop Bedienungsanleitung

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Bedienungsanleitung

Adrenaline

Adrenaline Flying Tickets Montage- und Bedienungsanleitung

Swinks

Swinks Stern Pinball Ghostbusters Bedienungsanleitung

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Bedienungsanleitung

jakar

jakar SPEED CARS Bedienungsanleitung

Carmelli

Carmelli HAT TRICK NG1015H Bedienungsanleitung