Quick Installation Guide [en] 7
Safety Regulations
Before starting the initial setup procedure and during the operation of the ISD-
PoE, please note the following safety regulations. Their purpose is to protect
yourself and others from personal injuries, and avoid damage to the equipment.
CAUTION: Failure to follow these directions could result in bodily harm
or loss of life.
Basic Personal Security Precautions
Read the documentation and make sure that your system meets the
requirements listed therein.
Do not open the housing of the device. The ISD300-PoE may only be connected
and operated if the housing is not opened and if the ISD300-PoE is in perfect
condition.
Do not put objects on top of the housing.
Unauthorised modifications to the device can affect the product certification
and are forbidden.
Operating Environment Prerequisites
The ISD300-PoE must be placed on a solid surface with no vibration.
The ISD300-PoE must not be operated in dusty places and direct sunlight.
Avoid contact with humidity or liquids.
The ISD300-PoE may only be connected and operated if the installation
location meets the ambient conditions.
Security Precautions for Cabeling and Power Cords
Make sure that no-one steps on or stumbles over the cables.
Do not connect a telephone cable to the RJ-45 connector. The RJ-45
connector may only be connected to SELV voltages. For the connection to the
RJ-45 connector only STP cabling (category 5 or better) may be used. The
shielding must fit flushly to the connector.
Only use a certified USB Hi-Speed cable for the connection to the printer. You
will find a list of certified cables at www.usb.org!
Ambient temperature: 5 - 30 °Celsius
Relative humidity: 20 - 80 %
