SEH MyUTN-250 Bedienungsanleitung

Quick Installation Guide 1

Monday - Thursday

Friday

8:00 a.m. to 4:45 p.m. and

8:00 a.m. to 3:15 p.m. (CET)

℡+49 (0)521 94226-44

@[email protected]

USB Deviceserver

myUTN-250

Quick Installation Guide

Overview [en]

This Quick Installation Guide provides

a description of the installation of the

myUTN-250. It contains the following

information:

General Information

Safety Regulations

Hardware Installation

Software Installation

Getting Started

Configuring the UTN Server

Please note the table of contents on

page 3. Should you have any further

questions, please contact our support

hotline.

Überblick [de]

Dieser Quick Installation Guide

beinhaltet eine Beschreibung der

Installation des myUTN-250. Sie

erhalten die folgenden Informationen:

Allgemeine Information

Sicherheitsvorschriften

Hardware-Installation

Software-Installation

Erste Schritte

UTN-Server konfigurieren

Beachten Sie das Inhaltsverzeichnis

auf Seite 17. Falls Sie noch Fragen

haben, kontaktieren Sie unsere

Support- Hotline.

2 Quick Installation Guide

Date of Manufacture

The serial number includes the date of manufacture.

The serial number can be found on the type plate.

Quick Installation Guide [en] 3

2 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Scope of Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

LED Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2 Safety Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2 Hardware Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2 Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2 Getting Started: SEH UTN Manager . . . . . . . . . . . . . . . 10

Starting the SEH UTN Manager . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Assigning an IP Address to the UTN Server . . . . . . . . . . . . . . .12

Adding the UTN Server to the Selection List . . . . . . . . . . . . . .13

Connecting the USB Device to the Client . . . . . . . . . . . . . . . . .14

2 Configuring the UTN Server . . . . . . . . . . . . . . . . . . . . . . 15

 Table of Contents

4 [en] Quick Installation Guide

General Information

Purpose

The USB Deviceserver 'myUTN-250' allows you to access non-network-ready USB

devices (e.g. hard disks, etc.) in the network. For this purpose, the USB devices will

be connected to the USB ports of the myUTN-250. The software tool 'SEH UTN

Manager' handles the access to the USB devices.

The SEH UTN Manager is installed on all clients that are intended to access a USB

device in the network. The SEH UTN Manager shows the availability of all UTN

servers in the network and establishes a connection between the client and the

USB port including the connected USB device.

The administration of the myUTN-250 is done via the 'myUTN Control Center'.

Scope of Supply

Please check the package content before getting started:

UTN server USB Deviceserver 'myUTN-250'

Quick

Installation

Guide

The Quick Installation Guide provides a brief

description of the installation of the myUTN-250.

(This document)

Power pack External power pack

Quick Installation Guide [en] 5

Technical Data

Properties Values

Network connection logical:

physical: - IEEE 802.3

-RJ-45

Device connection - 1 × USB 3.0 SuperSpeed

- 2 × USB 2.0 Hi-Speed

Current input - 350 mA @ 12 VDC (without load)

- 1350 mA @ 12 VDC (with full load on the USB ports)

Operating environment - Ambient temperature: 5–40 °C

- Relative humidity: 20–80%

Dimensions - Width: 140 mm

- Height: 32 mm

- Depth: 99 mm

- Weight: 50 g

1) Link LED (green)

2) Activity LED (yellow)

3) Status LED (green)

4) Power LED (yellow)

5) LED for the USB ports 1–3 (green/

orange)

6) Network connector (RJ-45) for

1000BaseT, 100BaseTX and 10BaseT

7) USB ports 1–3

(USB port 1: USB 3.0 SuperSpeed,

(USB ports 2 and 3: USB 2.0 Hi-Speed)

8) Reset button

9) Connector for the included power pack

Front view

Rear view

6 [en] Quick Installation Guide

LED Display

The LEDs of the UTN server provide information about its status.

LED Action Color Description

Link permanently on

permanently off

green

There is a connection to the network.

There is no connection to the network.

Activity blinks at irregular

intervals yellow Indicates the exchange of network data

packets.

Status permanently off

blinks 3 times

blinks 2 times

green

If the activity LED blinks periodically at the

same time, the BIOS mode is signalized.

Indicates the assignment of a ZeroConfig IP

address.

Indicates the assignment of an IP address that

does not correspond to 0.0.0.0 or that comes

from outside the ZeroConf range.

Power permanently on

permanently off

yellow

The device is powered.

The device is not powered.

USB ports 1–3 permanently off

permanently on

green

orange

No USB device is connected to the respective

port.

A USB device is connected to the respective

port.

The connection to the respective port and the

attached USB device is activated.

Quick Installation Guide [en] 7

Safety Regulations

UTN servers are network devices for use in office environments. The myUTN-250

is designed for the integration of USB devices into TCP/IP networks.

Before starting the initial setup procedure and during the operation of the UTN

server, please note the following safety regulations. Their purpose is to protect

yourself and others from personal injuries, and avoid damage to the equipment.

Read the documentation and make sure that your system meets the

requirements listed therein.

Avoid contact with humidity or liquids.

The device must only be connected and operated if it is in perfect condition.

Make sure that no-one steps on or stumbles over the cables.

If the supplied power cord cannot be used in your country, acquire an

appropriate power cord that suits national provisions. For more information,

please consult your retailer.

Do not connect a telephone cable to the RJ-45 connector. The RJ-45

connector may only be connected to SELV voltages. For the connection to the

RJ-45 connector only STP cabling (category 5 or better) may be used. The

shielding must fit flushly to the connector.

The device must only be operated using the power pack included in the

package.

Only use a certified USB cable (< 3 m) listed at www.usb.org.

8 [en] Quick Installation Guide

Hardware Installation

You can directly connect up to three USB devices to the UTN server (myUTN-250).

network

clients with the software tool 'SEH UTN Manager'

myUTN-250

USB device

USB 3.0

USB 2.0

Proceed as follows:

1. Connect the UTN server and the USB device to the USB data

cable. (Repeat this step if you want to connect more than

one USB device.)

2. Connect the network cable (RJ-45) to the UTN server.

3. Connect the power cord to the UTN server.

Quick Installation Guide [en] 9

Software Installation

The software tool SEH UTN Manager organizes the access to the USB devices. The

SEH UTN Manager is available in two versions:

Complete version

Minimal version (only command-line interface)

The complete version has a graphical user interface and offers additional

features. A detailed description can be found in the myUTN User Manual.

The SEH UTN Manager is installed on all clients that are intended to access a USB

device in the network. Different installation files are available, depending on the

operating system.

First, you have to download the installation file for the SEH UTN Manager from

the homepage of SEH Computertechnik GmbH:

http://www.seh-technology.com/products/usb-device-servers/

products/myutn-250-downloads.html

Scan this QR code using your smart phone to get direct access to the homepage.

System requirements:

- Windows XP or later;

Mac OS X 10.6.x, Mac OS X 10.7.x (64-bit), OS X 10.8.x, 10.9.x

- The installation can only be carried out by users with administrative rights.

Proceed as follows:

1. Start the installation file.

2. Install the complete version of the SEH UTN Manager (including graphical

user interface). Follow the installation routine.

The SEH UTN Manager is installed on your client.

10 [en] Quick Installation Guide

Getting Started: SEH UTN Manager

After the SEH UTN Manager is started, the network will be scanned for connected

UTN servers. The network range to be scanned is freely definable.

All UTN servers found will be shown in the 'network list' together with the

connected USB devices. The required UTN servers will be selected and added to

the 'selection list'. The UTN servers listed in the selection list and the connected

USB devices can then be used by the user.

This chapter describes the first steps with the program.

’Starting the SEH UTN Manager’ 11

’Assigning an IP Address to the UTN Server’ 12

’Adding the UTN Server to the Selection List’ 13

’Connecting the USB Device to the Client’ 14

Client and UTN server communicate via the UTN port 9200. This port must not be

blocked by a firewall. If necessary, you can change the port number and use a

secure UTN SSL port. A detailed description can be found in the myUTN User Manual.

Detailed information on how to use the SEH UTN Manager can

be found in the Online Help. To start the Online Help, select

Help – Online Help from the menu bar.



Inhaltsverzeichnis

Sprachen:

Andere SEH Server Handbücher

SEH

SEH mySND-120 Bedienungsanleitung

SEH

SEH myUTN-50a Bedienungsanleitung

SEH

SEH INU-100 Handbuch

SEH

SEH EPS TSE Server 8 Bedienungsanleitung

SEH

SEH myUTN-80 Bedienungsanleitung

SEH

SEH myUTN-50a Bedienungsanleitung

SEH

SEH myUTN-50a Bedienungsanleitung

SEH

SEH mySND-120 Bedienungsanleitung

SEH

SEH myUTN utnserver Pro Bedienungsanleitung

SEH

SEH myUTN-120 Bedienungsanleitung

SEH

SEH myUTN-50 Bedienungsanleitung

SEH

SEH myUTN-52 Bedienungsanleitung

SEH

SEH myUTN-50 Bedienungsanleitung

SEH

SEH ProMAX Bedienungsanleitung

SEH

SEH myUTN-50a Bedienungsanleitung

SEH

SEH Dongleserver myUTN-800 Bedienungsanleitung

SEH

SEH dongleserver Pro Bedienungsanleitung

SEH

SEH Mac OS 8 Bedienungsanleitung

SEH

SEH myUTN-50a Bedienungsanleitung

SEH

SEH myUTN-52 Bedienungsanleitung

SEH

SEH utnserver Pro Bedienungsanleitung

SEH

SEH myUTN-54 Bedienungsanleitung

SEH

SEH myUTN-50a Bedienungsanleitung

SEH

SEH myUTN-80 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

SEH myUTN-250 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken