4.0 Instructions for use
4.1 NB ALL CLIENT MOVING AND HANDLING TASKS SHOULD ONLY BE CARRIED OUT IN
ACCORDANCE WITH APPROVED CLIENT MOVING AND HANDLING TECHNIQUES AND AFTER A
FULL ASSESSMENT OF THE CLIENT, THE TASK AND THE ENVIRONMENT* IN WHICH THE
TASK IS TO BE CARRIED OUT.
4.2 The
Locomotion
has been designed to allow one or two carers to transfer a client from one seated
position tothe Locomotion, move the Locomotion to another location across a firm flat floor and then
transfer the client to another seated position.
4.2.1 *Moving the Locomotion on a soft floor surface may produce a tipping hazard. As part of
the environment the floor must be assessed as compatible and safe before use
.
4.3 Before a transfer is started carers must satisfy themselves by an appropriate assessment that the
client is able to bear weight independently.
4.4 Before every use of the
Locomotion
ensure that both the Mast and Shin Pad are secure, the Brakes
are operational and that the equipment is in no way damaged.
4.5 Before using your
Locomotion
adjust the height, rotation and lateral position of the Shin Pads to suit
the client as described in above.
4.6 The
Locomotion
can now be manoeuvred and brought to a position in front of the client.
4.7 Put the brake on.
4.8 Assist the client to the front of their chair, ready to stand and place the client’s feet on the non-slip foot
plate. The
Locomotion
should now have the client’s feet on the non-slip foot plate and shins firmly
against the shin pad.
4.9 Encourage the client to use the handle to pull themselves into a standing position. Note, as the client
stands the Locomotion may tilt slightly towards the client as the Anti-Tip Pads engage with the ground,
this is normal operation**. The carer should position themselves at the side of the client ready to assist if
required. Once the client is in a stable standing position, release the Brake and move the Locomotion to
the required location.
4.9.1 **As described below (4.14.1), if desired this small ‘tilt’ can be eliminated by the carer counterbalancing
the Locomotion.
4.10 When at the new location put the Brake on.
4.11 Reverse the above procedure to seat the client.
4.12 Release the Brake and move the Locomotion away from the client.
4.13 The Locomotion is not intended for outdoor use or for transporting clients over long distances.
4.14 If the client is unable to stand with a natural standing pattern but has still been assessed as a safe user of
the Locomotion it may be necessary for a carer to counterbalance the Locomotion…
4.14.1…by placing their foot on the brake pedal and holding the hand rail as the client stands or sits.
4.2.0 Locomotion Accessories
4.2.1 See instructions included with the Accessories.
4.2.2
Locomotion Assist Belt
LOCO-514 Small
LOCO-515 Medium
LOCO-516 Large
