Sena 10C Bedienungs- und Wartungsanleitung

PREPARATION

Knowing the Headset Layout

Antenna

Camera Button

Lens Jog Dial

Status LED

Micro HDMI

Cable Port

MicroSD

Card Slot

Charging LED

Speaker and

Microphone Port

DC Power Charging &

Firmware Upgrade Port

Phone Button

BASIC OPERATION

Operating the Buttons

Tap the

button

Double tap the

button

Press and hold

the button for

5 seconds

Press the two

buttons at the

same time

Rotate the

Jog Dial

ON You will hear

ascending beeps.

“Hello”

OFF You will hear

descending beeps.

“Good bye”

Simultaneously press and hold the Jog Dial and the Phone Button

Adjusting the Volume

You will hear a beep when the volume

reaches the maximum or minimum

level.

PAIRING

Pairing with Mobile Devices - Phone, Music

Blinking

You will hear multiple beeps.

“Phone pairing”

Bluetooth

Sena10C

“Your headset is paired”

Checking the Battery Level

Blinking

70~100%

Blinking

30~70%

Blinking

0~30%

Turn on the headset and check the battery level via the Status

LED.

“High” 70~100%

“Medium” 30~70%

“Low” 0~30%

Or, press and hold the Jog Dial and the Phone Button for 3 more

seconds when the headset turns on. You will hear a triple beep

and a voice prompt.

Charging the Battery

Charging

Fully charged

AC adapter

Using Phone Features

After Pairing…

Answering Calls

Ending Calls

Rejecting Calls

Transferring Calls

between a mobile phone and the

headset

“Hello”

until you hear a beep

until you hear

a beep

until you hear

a beep

Installing the Headset

Clamp Unit

Speaker

Microphone

Headset

You will hear a beep.

“Speed dial”

Making Calls

Using the Phone Keypad Using the Voice Dialer

Using the Speed Dial

Voice Menu

• Last number redial

• Speed dial 1

• Speed dial 2

• Speed dial 3

• Cancel

Listening to Music

After Pairing…

Playing or Pausing Music Tracking Forward or Backward

until you hear

a double beep

Rotate While

Pressing

Österreich:

Tel.: 01/ 58 55 430

Fax: 01/ 58 55 460

Deutschland:

Tel.:0761 / 59 21 00

Fax: 0761 / 58 52 28

Schweiz:

Tel.:061 / 27 311 - 31

Fax: 061 / 27 311- 39

HANTZ + PARTNER

The Upgrade Company! www.hantz.com

www.senaheadsets.de

Quick Start Guide

Motorcycle Bluetooth® Camera &

Communication System

INTERCOM

Pairing with Other Headsets

Headset A Headset B

“Intercom pairing”

Follow the steps above to pair with two or more headsets.

Using the Intercom

After Pairing…

You can start a two-way intercom

conversation with each headset.

CAMERA

ON OFF

Recording Videos

ON “Recording”

OFF “Recording stopped”

Taking Photos

You will hear a shutter sound.

Tagging Videos

To EnterVideo Tagging Mode To Start VideoTagging To ExitVideo Tagging Mode

13 3

“Video tagging ready” “Video tagging” “

“Taggingcomplete”

RADIO

2You will hear a double beep sound.

“FM on” or

Seeking Stations

Rotate While Pressing

Saving or Deleting Stations

To Save To Delete

“Preset (#)” “(#)” “Save preset

(#)”

“Delete preset

(#)”

Listening to Preset

Stations

SETTING

Method1) Using the headset

Headset Settings Camera Settings

“Camera setup”

Method2) Using the Sena Device Manager

Connect the headset to your computer via a USB cable. Launch the Sena

Device Manager and click DEVICE SETTING

settings.

For details about downloading the Sena Device Manager, refer tothe

Method3) Using the Sena Smartphone App

1. On your smartphone, download the Sena Smartphone App for Android

or iPhone from Google Play or App Store.

Refer to www.senaheadsets.de/download for more details.

2. Pair your smartphone with the headset.

3. Run the Sena Smartphone App. Swipe the screen to the right and tap

Setting

15.May

You can view other Sena products at the Sena website:

www.senaheadsets.de

TROUBLESHOOTING

Factory Reset

If you want to restore the 10C to factory default settings, press and hold

the Phone Button for 12 seconds. Tap the Jog Dial. The headset

Fault Reset

If the 10C is not working properly for any

reason, push the pin-hole reset button

located on the back of the headset.

Sena

www.senaheadsets.de

www.facebook.de/BikerHeadset

E-mail: info@bikerheadset.com

Österreich:

Tel.: 01/ 58 55 430

Fax: 01 /58 55 460

Deutschland:

Tel.:0761 / 59 21 00

Fax: 0761 / 58 52 28

Schweiz:

Tel.:061 / 27 311 - 31

Fax: 061 / 27 311- 39

HANTZ + PARTNER

The Upgrade Company! www.hantz.com

www.senaheadsets.de

HANTZ + PARTNER

www.senaheadsets.de

Andere Handbücher für 10C

Andere Sena Motorradzubehör Handbücher

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

3M Speedglas 9100 MP Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

Sperian

Sperian Optrel p420 Bedienungsanleitung