Sena R2X Bedienungsanleitung

Andere Handbücher für R2X

1

Inhaltsverzeichnis

Andere Sena Motorradzubehör Handbücher

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

SW-Motech

SW-Motech SBL.01.971.10000/B Bedienungsanleitung

GÜDE

GÜDE GSH 180-TC-2 Bedienungsanleitung

R2X HELMET and

R2X UTILITY APP

Guide

TABLE OF CONTENTS

1. R2X Helmet Set-Up Guide

Refer. R2X Operation

2. Running the R2X Utility App

3. R2X Firmware Update

4. Running the Amazon Alexa App

5. Calling Alexa

1.1 Powering On

Press and hold the (+) Button and Center Button for 1 second.

1.2 Phone Pairing

The R2X will automatically enter the phone pairing mode when you initially turn on the R2X

or in the following situation: •Rebooting after executing Factory Reset.

1) Press and hold the (+) Button and Center Button for 1 second until the

LED flashes Blue alternately and you hear a voice prompt, “Phone pairing”.

2) With your mobile phone in Bluetooth-pairing mode, select R2X in the list of devices detected.

3) If your mobile phone asks for a PIN, enter 0000.

4) The mobile phone confirms that pairing has been completed and the R2X is ready to use.

You will hear a voice prompt, “Your headset is paired”.

1. R2X Helmet Set-Up Guide

Note:

• The phone pairing mode lasts for 3 minutes.

• To cancel phone pairing, tap the Center Button.

a. Powering On and Off

Power On : Press and hold the (+) Button and Center Button for 1 second.

Power Off : Tap the (+) Button and Center Button.

b. Phone Pairing

When using the R2X with smartphone for the first time, they will need to be “paired.”The R2X

remains paired with the devices and automatically reconnects to them when they are within range.

b.1 Initially Pairing the R2X Helmet

The R2X will automatically enter the phone pairing mode when you initially turn on the R2X

or in the following situation: •Rebooting after executing Factory Reset.

1. Press and hold the (+) Button and Center Button for 1 second until the LED flashes

Blue alternately and you hear a voice prompt, “Phone pairing”.

2. With your mobile phone in Bluetooth-pairing mode, select R2X in the list of devices detected.

3. If your mobile phone asks for a PIN, enter 0000.

4. The mobile phone confirms that pairing has been completed and the R2X is ready to use.

You will hear a voice prompt, “Your headset is paired”.

Refer. R2X Operation

b.2 Pairing When the R2X Helmet is Turned Off

1. While the R2X is off, press and hold the (+) Button and Center Button for 5 seconds

until the LED flashes Blue alternately and you hear a voice prompt, “Phone pairing”.

b.3) Pairing When the R2X Helmet is Turned On

1. While the R2X is on, press and hold the Center Button for 5 seconds until the LED

flashes Blue alternately and you hear a voice prompt, “Phone pairing”.

3) Factory Reset

To erase all of your settings and start fresh, the R2X can be restored

to factory default settings using the factory reset.

1. To restore the R2X to factory default settings, press and hold the

Center Button for 10 seconds until you hear a voice prompt, “Factory reset”.

2. Within 10 seconds, Tap the Center Button to confirm reset.

The R2X will be restored to factory setting and switched off automatically.

You will hear a voice prompt, “Headset reset, good-bye”.

2. Running the R2X Utility App

2.1 Download and install files

Download and install the APK file from the following link

https://senatech.box.com/s/5y0utqy2eokr65fpd6529rrtcpir94b7

2.2 Launch the R2X Utility App on your Android phone.

If R2X is not connected, the [Let’s Get Started] screen is displayed.

2.3 Power on the R2X helmet and Phone Pairing

Press and hold the (+) Button and Center Button for 1 second.

(refer “CH 1.2 Phone Pairing”)

2.4 Click the Next Button moves to the [Bluetooth Setting] screen of

the smartphone. Select [R2X] and go back to the app.

2.5 After connecting the device, if the firmware is the latest version,

check the connected device information and set the name.

2.6 Press the input box and the keypad appears at the bottom of the screen.

Set a name and click the Save Button to complete the name setting.

3.1 How to update the firmware when connecting R2X for the first time after

installing the R2X Utility app.

3.1.1 After connecting the device, If the device firmware is not the latest version,

it moves to the firmware update guide screen.

3.1.2 Firmware update starts when you click the [Start] button.

3.1.3 When the firmware update is complete, the [Firmware Update Complete] screen

automatically moves to the [Name Your Device] screen.

3. R2X Firmware Update

3.2 How to update the firmware when connecting R2X more than once after

installing the R2X Utility app.

3.2.1 When the R2X is powered on, it is automatically connected to the App and

it switches to the [Home] screen.

3.2.2 If the R2X needs a firmware update, it will go to the firmware update screen.

3.2.3 Firmware update starts when you click the [Start] button.

3.2.4 When the firmware update is complete, the [Firmware Update Complete] screen

automatically moves to the [Home] screen.

4.1 Running the Amazon Alexa app the first time you use the RX2 utility app.

4.1.1 When the device name setting is completed( Refer ch 3.1.2),

the [Amazon Alexa] screen appears automatically.

Click Next Button to move to the next screen.

4. Running the Amazon Alexa App

Note. Running the Amazon Alexa APP after the first use of the RX2 Utility App

1) Click the upper left of the [Home] screen -> Click [Amazon Alexa ] Button ->

Click [NEXT] Button -> Click [Amazon Alexa ] Link

4.2 Click the Amazon Alexa App link on the [Amazon Alexa Things To Try] screen.

1) If the Amazon Alexa App is not installed, click the install button to

go to the [Play Store] installation screen.

2) If the Amazon Alexa App is installed, run the Amazon Alexa App.

4.3 Log in using your Amazon Account or register with a new Amazon Account.

4.4 Click the [Devices] Button ->Click the [+] Button -> Click the [Add Device]

or