Sena 30K Bedienungsanleitung

30K

Motorcycle Bluetooth Communication System with Mesh

Intercom™

TABLE OF CONTENTS

1. About the Motorcycle Bluetooth Communication System with Mesh Intercom™

1.1. Product Details

1.1.1. Headset Main Unit

1.1.2. Universal Clamp Kit

2. Installing the Headset on Your Helmet

2.1. Helmet Installation

2.2. Using the Glued Surface Mounting Plate

2.3. Switching the Microphone

2.3.1. Wired Boom Microphone

2.3.2. Wired Microphone

2.4. Earbuds

2.5. External Mesh Intercom Antenna

3. Getting Started

3.1. Button Functions

3.2. Powering On and Off

3.3. Charging

3.4. Checking the Battery Level

3.5. Volume Adjustment

3.6. Downloadable Sena Software

3.6.1. Sena Device Manager

3.6.2. Sena Smartphone App

3.7. Configuration Menu

3.7.1. Basic Configuration Menu

3.7.2. Advanced Configuration Menu

4. Pairing the Headset with Other Bluetooth Devices

4.1. Mobile Phone

4.2. Additional Mobile Phones, GPS, MP3 Player or Sena SR10 Two-Way Radio Adapter

4.3. Advanced Selective Pairing: Hands-Free or A2DP Stereo

4.3.1. Phone Selective Pairing - Hands-Free Profile

4.3.2. Media Selective Pairing - A2DP Profile

4.4. GPS Pairing

5. Mobile Phone Usage

5.1. Making and Answering Calls

5.2. Speed Dialing

5.2.1. Assigning Speed Dial Presets

5.2.2. Using Speed Dial Presets

5.3. VOX Phone (Default: Enable)

6. Stereo Music

6.1. Playing Music with Bluetooth Devices

6.2. Music Sharing

6.3. Audio Boost (Default: Enable)

6.4. Smart Volume Control (Default: Disable)

7. Bluetooth Intercom Setup

7.1. Bluetooth Intercom Pairing

7.2. Bluetooth Two-Way Intercom

7.3. Bluetooth Multi-Way Intercom

7.3.1. Starting a Bluetooth Three-Way Intercom Conference

7.3.2. Starting a Bluetooth Four-Way Intercom Conference

7.3.3. Ending Bluetooth Multi-Way Intercom

7.4. Three-Way Conference Phone Call with Intercom Users

7.5. Group Intercom

7.6. Universal Intercom

7.7. Audio Multitasking (Default: Enable)

7.8. Intercom-Audio Overlay Sensitivity (Default: 3)

7.9. Audio Overlay Volume Management (Default: Disable)

7.10. VOX Intercom (Default: Disable)

7.11. HD Intercom (Default: Enable)

7.12. Advanced Noise Control™ (Default: Enable)

8. Mesh Intercom

8.1. What is Mesh Intercom?

8.2. Mesh Intercom Mode (Default: Public Mode)

8.2.1. Public Mode

8.2.2. Private Mode

8.2.3. Guest Mode (Default: Disable)

8.3. Using the Mesh

8.3.1. Creating the Mesh

8.3.2. Join an Existing Mesh

8.3.3. Accept/Reject Mesh Invitation Request

8.3.4. Quit the Mesh

8.3.5. Public Mode/Private Mode Toggle

8.3.6. Mic Enable/Disable (Default: Disable)

9. Using the FM Radio

9.1. FM Radio On/Off

9.2. Seek and Save Radio Stations

9.3. Scan and Save Radio Stations

9.4. Temporary Station Preset

9.5. Navigating Preset Stations

9.6. Region Selection (Default: Worldwide)

9.7. Radio Data System (RDS) Alternative Frequency (AF) Setting (Default: Enable)

9.8. FM Station Guide (Default: Enable)

10. Ambient Mode

11. Voice Command

11.1. Voice Command (Default: Enable)

12. General Settings

12.1. Function Priority

12.2. Firmware Upgrades

12.3. Voice Prompts

12.4. Sidetone (Default: Disable)

12.5. Delete All Bluetooth Pairing Information

13. Remote Control

13.1. Pairing with the Remote Control

14. Troubleshooting

14.1. Fault Reset

14.2. Factory Reset

1. About the Motorcycle Bluetooth Communication System with

Mesh Intercom™

1.1. Product Details

1.1.1. Headset Main Unit

- Phone Button

- Jog Dial

- Mesh Intercom Button

- Status LED

- Mesh Intercom Antenna

- Bluetooth Antenna

1.1.2. Universal Clamp Kit

- Static Boom Microphone

- Speakers

- MP3 Port

- Ambient Mode Button

- Microphone Port

- Speaker Port

- Earbud Port

- Quick Release Button

2. Installing the Headset on Your Helmet

2.1. Helmet Installation

To securely install the headset on the helmet, please follow this procedure.

1. Insert the back plate of the clamp unit between the internal padding and the external shell of the

helmet, and tighten the two screws.

Note:

Depending on the size and shape of your helmet, you may need to change the thickness of the rubber

pad between the clamp plates using the two extra rubber pads in the box. To increase the overall

thickness, attach the thinner one to the original rubber pad or replace the original rubber pad with the

thicker one.

2. Make sure that the microphone is located properly close to your mouth when you wear the

helmet. Adjust the direction of the microphone so that the fin side of the microphone is facing

outward, away from your lips.

3. Place the helmet speakers along with the hook and loop fasteners, centered to your ear, in the

ear pockets of the helmet. If the helmet has deep ear pockets, you can use the speaker pads to

place the speakers closer to your ears.

Note:

1. The speaker with the shorter wire is for the left ear and the speaker with the longer one is for the

right ear.

2. To enhance the audio quality, you can make use of the foam speaker covers. Cover each

speaker with the foam and attach the hook fastener at the back of the speaker. Then place the

speakers in the helmet as described above. Foam covered speakers work most effectively when

they are slightly touching your ears.

4. Attach the headset main unit to the clamp unit. Slide the main unit down onto the clamp unit until

it clicks firmly into the bottom portion of the clamp unit.

5. To remove the main unit from the clamp unit, press the Quick Release Button to slide it off the

clamp unit.

2.2. Using the Glued Surface Mounting Adapter

If you have any problem equipping the clamp unit on the helmet for any reason, you may use the glued

surface mounting adapter voice command to attach the clamp unit on the external surface of the helmet.

1. Remove the speaker unit.

2. Remove the back plate.

3. Remove the rubber pad and replace it with the thicker rubber pad included in the package.

4. Reconnect the speaker cable to the speaker port.

5. Hook on the adapter to the clamp unit then screw in the glued external adapter to the clamp unit.

6. Locate a proper surface on the helmet to attach the unit then clean the helmet surface location

with a moistened towel and allow to dry thoroughly.

7. Peel off the cover of the adhesive tape of the adapter and attach the unit on the proper surface of

your helmet.

Andere Handbücher für 30K

Inhaltsverzeichnis

Andere Sena Motorradzubehör Handbücher

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

SW-Motech

SW-Motech SBL.01.971.10000/B Bedienungsanleitung

GÜDE

GÜDE GSH 180-TC-2 Bedienungsanleitung