Sena C1 Bedienungsanleitung

C1 Manual

Charging (The Bluetooth / LE function is not working while is charging.)

Red LED: Charging

Blue LED: Fully charged

Power On/Off

Power On : Press and hold the (+) Button and Center Button for 1 second

Power Off : Tap the (+) Button and Center Button.

Volume Adjustment

(+) Button - Increase the volume

(-) Button - Decrease the volume

Battery Check

Phone, Music Pairing

Initially Pairing the C1

The Bluetooth system will automatically enter the phone pairing mode

when you initially turn on the Bluetooth system or in the following

situation:

• Rebooting after executing Factory Reset

1. Press and hold the Center Button and (+) Button for 1 second.

2. Search for Bluetooth devices on your mobile phone. Select the C1 in the list of the devices

detected on the mobile phone.

3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.

Music Operation

Play or pause music: Press the Center Button for 1 second.

Track back: Press the (-) Button for 1 second.

Track forward: Press the (+) Button for 1 second.

Mobile Phone Call Making and Answering

Answering a call: Tap the Center Button

Ending a call: Press the Center Button for 2 seconds.

Voice dial: Press the Center Button for 3 seconds.

Speed dial: Press the (+) Button for 3 seconds.

Rejecting a call: Press the (+) Button for 2 seconds.

Intercom

Intercom Pairing

1. Press and hold the Center Button of two headsets for 5 seconds until red LEDs of both units

start to flash rapidly.

2. Simply tap the Center Button of any one of the two headsets.

Intercom Start/End : Tap the Center Button

LED Taillight

LED On and Solid -> Night Flash -> Day Flash -> LED Off : Press the (-) Button for 1 second.

Setting

Configuration Menu: Press the Center Button for 15 seconds.

Troubleshooting

Factory Reset

If you want to restore the headset to factory default settings, use the Factory Reset in the

configuration menu. The headset automatically restores the default settings and turns off.

Certification and Safety Approvals

FCC Compliance Statement

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment on and off, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antennae

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. End users must follow the specific operating

instructions for satisfying RF exposure compliance.

The antenna used for this transmitter must not transmit simultaneously with any

other antenna or transmitter, except in accordance with FCC multi-transmitter

product procedures.

When equipped, the distance between antenna and one’s head surface is 21.5 mm.

FCC Caution

Any changes or modifications to the equipment not expressly approved by the

party responsible for compliance could void user’s authority to operate the

equipment.

CE Declaration of Conformity

This product is CE marked according to the provisions of the R&TTE Directive

(1999/5/EC). Hereby, Sena declares that this product is in compliance with the

essential requirements and other relevant provisions of Directive 1999/5/EC. For

further information, please consult www.sena.com. Please note that this product

uses radio frequency bands not harmonized within EU. Within the

EU this product is intended to be used in Austria, Belgium, Denmark, Finland,

France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal,

Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and

Switzerland.

Industry Canada(IC) Statement

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may

cause undesired operation of the device.

Le present appareil est conforme aux CNR d’Industrie Canada applicables aux

appareils radio exempts de licence. L’exploitation est autorisee aux deux conditions

suivantes :

(1) l’appareil ne doit pas produire de brouillage, et

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique subi,

meme si le brouillage est susceptible d’en compromettre le fonctionnement.

IC RF Exposure Statement

Cet équipement est conforme aux limites d'exposition aux radiations de la FCC/IC

définies pour un environnement non contrôlé. Les utilisateurs finaux doivent suivre

les instructions d'utilisation spécifiques pour satisfaire à la conformité d'exposition

RF.

Lorsque équipé, la distance entre l’antenne et la surface de la tête est de 21.5 mm.

This device can be operated in at least one Member State without infringing applicable

requirements on the use of radio spectrum."

- RF Range: 2402 ~ 2 480 MHz (Bluetooth/LE)

- Max Power :

BT: Max. 16.51 dBm(eirp), LE: Max. 4.92 dBm(eirp)

BT: Max. 16.69 dBm, LE: Max. 3.62 dBm

Trade name: SENA

Inhaltsverzeichnis

Andere Sena Motorradzubehör Handbücher

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

3M

3M Speedglas 9100 MP Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

Sperian

Sperian Optrel p420 Bedienungsanleitung