Sena Latitude S1 Bedienungsanleitung

SMART SNOW HELMET

USER’S GUIDE

ENGLISH

SENA

Version 1.0.0

TABLE OF CONTENTS

1. ABOUT THE LATITUDE S1 SMART

SNOW HELMET 4

1.1 General Information 4

1.2 Product Details 5

1.3 Package Contents 5

1.4 Wearing the Helmet 6

1.4.1 How To Fit the Helmet 6

1.4.2 Helmet Fitment Check 8

2. GETTING STARTED: BLUETOOTH SYSTEM 9

2.1 Downloadable Sena Software 9

2.1.1 Sena Outdoor App 9

2.1.2 Sena Device Manager 9

2.2 Button Function 10

2.3 Powering On and Off 10

2.4 Charging 10

2.5 Checking the Battery Level 11

2.6 Volume Adjustment 11

3. PAIRING THE BLUETOOTH SYSTEM WITH

OTHER BLUETOOTH DEVICES 12

3.1 Phone Pairing 12

3.1.1 Initially Pairing the Latitude S1 12

3.1.2 Pairing When the Latitude S1 Is Turned Off 13

3.1.3 Pairing When the Latitude S1 Is Turned On 14

4. MOBILE PHONE USAGE 15

4.1 Making and Answering Calls 15

5. STEREO MUSIC 16

5.1 Using the Stereo Audio Cable 16

5.2 Using the Bluetooth Wireless Stereo 16

TABLE OF CONTENTS CONTINUED

6. BLUETOOTH INTERCOM 17

6.1 Intercom Pairing 17

6.2 Two-Way Intercom 18

6.2.1 HD Intercom 18

6.2.2 Advanced Noise Control™ (Always On) 18

6.3 Multi-Way Intercom 18

6.3.1 Starting a Three-Way Intercom Conference 19

6.3.2 Starting a Four-Way Intercom Conference 19

6.3.3 Ending Multi-Way Intercom 19

6.4 Group Intercom 20

7. FUNCTION PRIORITY AND FIRMWARE

UPGRADES 21

7.1 Function Priority 21

7.2 Firmware Upgrades 21

8. CONFIGURATION SETTING 22

8.1 Conﬁguration Setting 22

8.1.1 Unit Language 22

9. TROUBLESHOOTING 23

9.1 Fault Reset 23

9.2 Factory Reset 23

10. MAINTENANCE AND CARE 24

Latitude S1 Smart Snow Helmet | 4

1. ABOUT THE LATITUDE S1 SMART

SNOW HELMET

1.1 General Information

This product is a snow helmet. Do not use it for any other purpose than

snow sports. If you use the helmet for anything else, it may not provide

sufﬁcient protection in an accident.

Sena recommends that you choose a helmet which provides the most

coverage, as a helmet that covers more of your head may provide

additional protection. Make sure the helmet ﬁts comfortably and is

tightly fastened at all times.

WARNING

• Your helmet will not protect against injury in all types of accidents.

Even while wearing a helmet, low speed accidents may result in

serious head injury or death. A helmet will not protect against

injuries to the spine, neck or face. In the event of any impact, do

not use this helmet. There may be damage invisible to you, which

may reduce the ability of the helmet to reduce the harmful effects

of a blow to the head. Such helmet should be returned to Sena for

inspection, or destroyed and replaced.

• Do not modify or remove any original part of the helmet. Do not

use heat damaged helmets. Heat damaged helmets will appear to

have uneven or have bubbly surfaces.

• This User’s Guide and the stickers inside your helmet contain many

instructions and warnings about your helmet. It is important for you

to understand everything communicated in them. If you do not,

please contact your authorized Sena Retailer with any questions

you may have. Failure to follow any of the provided instructions

or warnings could void your warranty, and most importantly, could

result in severe personal injury or death. If you are a parent or

guardian and this helmet is for your child, please take the time to

read this manual as you should make sure your child understands

everything in this User’s Guide.

CHAPTER

Latitude S1 Smart Snow Helmet | 5

1 ABOUT THE LATITUDE S1 SMART SNOW HELMET

1.2 Product Details

Ventilation Lever

Speaker

Microphone

Ventilations

Status LED

Phone Button

Jog Dial

Bluetooth System Button

Speaker

MP3 Port

Ventilations

DC Power Charging &

Firmware Upgrade Port

1.3 Package Contents

Latitude S1 Helmet USB Power & Data Cable

(USB-C)

2.5 to 3.5 mm

Audio Cable

Latitude S1 Smart Snow Helmet | 6

1 ABOUT THE LATITUDE S1 SMART SNOW HELMET

1.4 Wearing the Helmet

1.4.1 How To Fit the Helmet

For proper use, the helmet must sit level on the head and low on

the forehead. The helmet uses a simple, quick-release buckle system

that, once adjusted, can be buckled and unbuckled without changing

the tightness. For proper use, the straps must be tight and evenly

tensioned.

To properly wear your helmet:

1. Position the helmet on your head with the front covering your

forehead. If the helmet is tipped back too far and is not covering your

forehead then the helmet is not in the proper position.

2. Position the strap adjuster centered, just below your ears.

WARNING: Always wear the helmet in the proper position on

your head with the front of the helmet covering your forehead for

maximum protection. Never wear the helmet tipped back as the

helmet will be in the improper position causing your forehead to be

exposed. All ﬁtment adjustments need to be made with the helmet

in the proper position.

3. Position the helmet halfway down on your forehead with the buckle

under your chin and back against your throat. The straps should ﬁt

comfortably around both of your ears.

O-ring

Chinstrap

Chinstrap Pad

Strap Adjuster

Buckle

Latitude S1 Smart Snow Helmet | 7

1 ABOUT THE LATITUDE S1 SMART SNOW HELMET

4. After pushing the “Chinstrap Pad” back, adjust the chinstrap tension

at the buckle with the strap adjuster in the proper position. Adjust

the tension so the chinstrap is tight yet comfortable by pulling the

chinstrap end through the buckle to either tighten or loosen the strap

as needed.

5. Secure the excess strap with the “O-Ring” and then pull the

“Chinstrap Pad” again.

6. Always wear the helmet with the chinstrap buckle fastened and with

the chinstrap pulled tight and positioned against the throat. With the

strap buckled and the helmet properly positioned, you should feel

the chinstrap pull ﬁrmly against your chin when you open your mouth.

When properly adjusted, the helmet will wrap around your head and

cradle it with ﬁrm, but comfortable pressure.

7. Try strapping your goggles on. If the helmet is on correctly you won’t

be able to scratch your forehead.

8. Your helmet is equipped with an adjustable retention system which

helps stabilize the helmet in the correct position when you ride. When

wearing the helmet, turn the retention system knob clockwise to

tighten the helmet or counterclockwise to loosen the helmet.

Retention System Knob

WARNING: For maximum protection, this helmet must be ﬁtted

and attached properly to the wearer’s head in accordance with the

following instructions. If after adjustment the helmet does not ﬁt

properly, do not use the helmet. Return it to the retailer or Sena.

Latitude S1 Smart Snow Helmet | 8

1 ABOUT THE LATITUDE S1 SMART SNOW HELMET

1.4.2 Helmet Fitment Check

With the retention system knob turned clockwise until comfortably tight

and the chinstrap buckled under the chin and back against the throat,

grab the helmet with both hands and try to remove it by rolling the

helmet forward and backward as far as you can. This is an important test

to ensure that the helmet ﬁts correctly. When you do this, you should

feel the chinstrap pull against the underside of your chin and the helmet

will resist any movement. If this isn’t the case, tighten the chinstrap and

try it again until this happens. If you cannot achieve the proper ﬁt, DO

NOT USE THIS HELMET. Replace it with a different size until the correct

ﬁt is achieved.

Also, for a proper Helmet Fitment Check if you can roll the helmet

forward such that it blocks your vision or if you can roll the helmet

backwards such that your forehead is not covered, tighten the chinstrap

and the retention system and try again until you cannot roll the helmet

forward or backwards.

WARNING

• Always make sure the buckle is properly fastened before you ride.

Failure to follow this instruction could result in serious personal

injury, as the helmet may not stay in position while riding or during

a fall.

• Check for proper ﬁt and adjustment often, including each time you

wear it, and periodically during use.

• This helmet is designed for use by Skiers and Snowboarders. This

helmet has not been approved and is not intended for extreme

uses such as bicycling, water sports, motor sports, street hockey,

playground activities, or other activities where face, ear, or greater

protection or coverage is desired.

• Always wear a helmet when skiing and snowboarding. Do not wear

a helmet while climbing trees, in play areas, or on playground

equipment. Parents: Instruct children to follow this warning. Failure

to follow this warning could result in serious personal injury, death

or death by strangulation.

Latitude S1 Smart Snow Helmet | 9

2. GETTING STARTED:

BLUETOOTH SYSTEM

2.1 Downloadable Sena Software

2.1.1 Sena Outdoor App

By simply pairing your phone with your Bluetooth system, you can use

the Sena Outdoor App for quicker, easier setup and management.

• App Features: Music, Device settings, Quick Start Guide, and User’s

Guide.

• Download

- Android: Google Play Store > Sena Outdoor

- iOS: App Store > Sena Outdoor

2.1.2 Sena Device Manager

The Sena Device Manager allows you to upgrade ﬁrmware and

conﬁgure settings directly from your PC. Download the Sena Device

Manager from sena.com.

CHAPTER

Latitude S1 Smart Snow Helmet | 10

2 GETTING STARTED: BLUETOOTH SYSTEM

2.2 Button Function

Bluetooth System Buttons

Status LED

Jog Dial

Phone Button

2.3 Powering On and Off

Power On

=1s

HOLD

Power Off

=1x

TAP

2.4 Charging

Charge the Bluetooth System

Depending upon the charging

method, the Bluetooth system will

be fully charged in about 3 hours.

Note:

• Please make sure to take off your helmet while charging. The

Bluetooth system automatically turns off during charging.

• Any 3rd party USB charger can be used with Sena products if the

charger is approved by either the FCC, CE, IC or other locally

approved agencies that Sena accepts.

• The Latitude S1 is compatible with 5 V/1 A input USB-charged

devices only.

Andere Handbücher für Latitude S1

Inhaltsverzeichnis

Andere Sena Motorradzubehör Handbücher

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

SW-Motech

SW-Motech SBL.01.971.10000/B Bedienungsanleitung

GÜDE

GÜDE GSH 180-TC-2 Bedienungsanleitung