Sena SM10 Bedienungsanleitung

User's Guide

www.senabluetooth.com

SM10

Dual Stream Bluetooth®

Stereo Transmitter

English

Sena Technologies, Inc reserves the right to make any

changes and improvements to its product without providing

prior notice.

Sena™ is a trademark of Sena Technologies, Inc. or its

subsidiaries in the USA and other countries. SMH10™,

SMH5™, SPH10™, SPH10S™, SPH10H™, SR10™,

SM10™ are trademarks of Sena Technologies, Inc. or its

subsidiaries. These trademarks may not be used without

the express permission of Sena.

The Bluetooth®word mark and logos are owned by

the Bluetooth SIG, Inc. and any use of such marks by

Sena is under license. Harley-Davidson®is a registered

trademarks of H-D Michigan, Inc. and Harley-Davidson,

Inc. Honda®and Gold Wing®are trademarks of Honda

Motor Co., Ltd. Sena Technologies, Inc. is not affiliated with

Harley-Davidson, H-D Michgan, Inc. or Honda Motor Co.,

Ltd. Other trademarks and tradenames are those of their

respective owners.

1. INTRODUCTION

2. PACKAGE CONTENTS

3. INSTALLING THE SM10

3.1 Installing on the Handle Bar

3.2 Placing on the Mounting Cradle (optional)

4. POWERING ON/OFF AND CHARGING

4.1. Power ON & OFF

4.2 Battery Check

4.3 Charging

4.4 Low Battery Warning

5. PAIRING THE SM10 WITH OTHER BLUETOOTH DEVICES

5.1 Bluetooth pairing with the first headset

5.2 Bluetooth pairing with the second headset

6. USING THE SM10

6.1 Connections

6.2 Using with a headset

6.3 Mute or un-mute AUX

6.4 Reset to Factory Default Settings

CONTENTS

English

6.5 Fault Reset

7. QUICK REFERENCE

BATTERY INFORMATION

MAINTENANCE AND CARE

DISPOSAL

CERTIFICATION AND SAFETY APPROVALS

• FCC Compliance Statement

• FCC RF Exposure Statement

• FCC Caution

• CE Declaration of Conformity

• Industry Canada Statement

• Bluetooth License

WAIVER AND GENERAL RELEASE

• Two-Year Limited Warranty

• Limitation of Liability

• Return for Full Refund

WARNING

1. INTRODUCTION

Thank you for choosing the Sena SM10. The SM10 is a

Bluetooth dual stream stereo transmitter based on Bluetooth

2.1+EDR technology. You can connect various audio devices

such as mobile phone or MP3 player by using the SM10. It also

supports onboard audio systems of specific brands by using

optional audio cables. Along with the dual streaming feature of

the SM10, both you and your passenger may listen to the same

music or radio at the same time by using most any Bluetooth

headsets in the market. The SM10 has an AUX audio input that

enables you to connect additional non-Bluetooth audio devices

such as a radar detector or GPS navigation.

Please read this user’s guide carefully before using the SM10.

Also refer to www.senabluetooth.com for the latest version

of the user’s guide and additional information related to Sena

Bluetooth products.

English

SM10 features:

•Dual audio streams for two Bluetooth headsets

•Auxiliary stereo input for GPS or radar/laser detector

•Water resistant for use in inclement weather

•Optional interface cable for onboard motorcycle audio

systems of Harley-Davidson and Honda Gold Wing

•Firmware upgradeable

•Two-year limited warranty

Technical Specifications:

•Bluetooth 2.1+EDR

•Advanced Audio Distribution Profile (A2DP), Audio Video

Remote Control Profile (AVRCP)

•Operating time: 8 hours

•Standby time: 3 days

•Battery charging time: 3 hours

•Lithium polymer battery

•Dimensions: 83 mm × 45 mm × 25 mm

(3.3 in × 1.8 in × 1.0 in)

•Weight: 50g (1.76 oz)

•CE, FCC, IC

2. PACKAGE CONTENTS

Blue LED

Red LED

AUX Port for auxiliary

audio input

Charging LED

Pairing Button

Power Switch

AUDIO IN Port for main stereo

audio input

DC Power Charging & Firmware

Upgrade Port

• Main Unit

English

• USB Power & Data Cable

• Cigarette Charger

• Audio Cable 3.5mm 4 pole

• Audio Cable 3.5mm 3 pole

• Handlebar Mounting Kit

• Mounting Cradle

3.1 Installing on the Handle Bar

1. Attach the mounting kit on the back of the SM10 along the

guide rail.

2. Place the main unit on the handle bar, wind the rubber band

around the handle bar, and hang it on the hook.

3.2 Placing on the Mounting Cradle (optional)

1. Locate a proper surface on your motorcycle body, clean the

body surface location with a moistened towel, and allow to

dry thoroughly

2. Peel off the cover of the adhesive tape of the mounting cradle

and attach the unit on the proper surface of your motorcycle.

3. INSTALLING THE SM10

English

4.1 Power ON & OFF

To power on the SM10, slide the Power Switch to on. The Blue

and Red LEDs will turn on. To power off, slide the Power Switch

to off.

4.2 Battery Check

You can check the battery level when the SM10 is powering on.

4.2.1 LED Indicator

When the SM10 is powering on, the Red LED flashes rapidly

indicating the battery level.

4 flashes = High, 70~100%

3 flashes = Medium, 30~70%

2 flashes = Low, 0~30%

4.3 Charging

It takes about 3.5 hours to be completely charged. The

Charging LED becomes solid blue from solid red when it is

completely charged.

4. POWERING ON/OFF AND CHARGING

Andere Handbücher für SM10

Inhaltsverzeichnis

Andere Sena Sender Handbücher

Sena

Sena SM10 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung