SENADA GLADIATOR Bedienungsanleitung
OWNER’
SMANUA
GLADIATOR
L
Welcome
Thank you for purchasing GLADIATOR from Senada Bikes.
Please read carefully and understand this manual fully before
assembling and riding your bike.
If you have questions after reading this manual, please contact us by
email.
We are here to help!
1
Email:[email protected]
2
Table of Contents
Attentions ............................................................... 3
General Info ..............................................................6
Product function diagram....................................................11
Product parameters........................................................14
Manual control instrument ..................................................16
Display interface...........................................................19
Button introduction .......................................................22
Attentions
Battery and Charging: Charge at 0℃～45℃
3
（32-113℉）, discharge at -20℃〜60℃
（68-140℉), keep the battery dry. Do not put the battery in acidic or alkaline liquid.
Avoid rain and keep away from fire, heat and high temperature environment. It is
strictly forbidden to connect the positive and negative poles of the battery reversely. It
is strictly forbidden to damage,disassemble the battery or cause short-circuit. Please
use the specific original charger for charging, with charging time no more than 8 hours
and the charging current no larger than 3A.When not in use for a long time, please
store the battery in a cool and dry place, and charge the battery for 5 hours every
month. The user must follow the manual instructions when charging, otherwise the
consequences will be at his own risk. Pay attention to the battery type and applicable
voltage that the charger can charge, and it is strictly forbidden to mix. When charging,
it should be placed in a ventilated environment. It is strictly forbidden to charge in
residential buildings, enclosed spaces, or under sunshine and in high temperature
environments. When charging, plug in the battery first, then connect to power supply
socket; after charge gets full, cut off the socket first, and then unplug the battery.
When the green light is on, the power supply should be cut off in time, and it is
forbidden to connect the charger to the AC power supply for a long time without
charging. During the charging process, if the indicator light is abnormal, there is a
peculiar smell, or the charger casing is overheated, stop charging immediately, and
repair or replace the charger. During the use and storage of the charger, pay attention
to avoid foreign objects entering, especially water or other liquids, so as to avoid a
short circuit inside the charger. The charger should not be carried with the bike as
much as possible. If it is necessary to carry it, it should be placed in the toolbox after
the shock absorption treatment is done. Do not disassemble or replace the
accessories in the charger by yourself.
Ride: Do not use it until you read the instructions carefully and understand the
performance of the product; do not lend it to people who can't manipulate the product
for riding. Before riding the bicycle, check whether the brakes are working. When you
brake, please activate the rear brake firstly, and then the front brake. Pay attention to
the brake tightness. If the brake is too loose, use an Allen key to tighten it. Pay
attention to increasing the braking distance when riding in rain or snow. Suitable age:
Riding between 16 and 65 years old. Please be sure to wear a safety helmet when
riding the ebike, follow the traffic rules, and do not drive on motorized lanes and roads
with many pedestrians. Please check the tire pressure before riding. The
recommended tire pressure is 35~45PSI. When riding on downhill and non-paved
roads, make sure the speed do not exceed 15km/h (9.3mph). When using the motor
4
,
please be careful not to hit it vigorously and keep the rotating shaft lubricated. It is not
allowed to ride with more than the maximum load of the body (the maximum load is
100 KG，220lbs) After use, the bike can not be parked in the building hall, evacuation
stairs, safety exits, and must be parked correctly in accordance with
Liability statement:After riding, please store the bike in a place without sunlight
and rain, not in a residential building; Regularly check the motor and brake; Regularly
check bike's screw , especially those need to be tightened, and tighten them regularly.
Recommended torque: (unit: kgf. cm) Steering handlebar screws 60-80, stem screws
175 ~ 200, seat cushion screws 175 ~ 200, wheel screws 320 ~ 450; The front and
rear wheels of the ebike should align with the central axis of the front fork or frame;
Regularly check if there is scratches, cracks or excessive wear in tires. The inner tube
and valve should be perpendicular to the wheel hub and not crooked. Damaged or
excessively worn tires need to be replaced immediately, please find a professional
technician to replace your tires, if your tires accidentally puncture and leak, please
contact a professional technician for repair or replacement.
Maintenance: The company reserves the right to modify and interpret the product
models, specifications or related information mentioned in this manual;The functions
of a specific model mentioned in this user manual are only applicable to that specific
5
model;The product models, specifications or related information mentioned in this
user manual are subject to any modification or change without prior notice;Without the
prior written permission of the company, the contents of this manual may not be
copied, modified, reproduced, transmitted or published in any form. Please read this
manual carefully before using the product, and operate in accordance with the manual,
otherwise the company will not be responsible for product damage or personal and
property damage caused by improper use or mistake
6
s
General Info
Assembly and Fit
Correct assembly and fit are essential elements of ensuring your bicycling safety,
performance, and comfort. Even if you have the experience, skill, and tools to
complete these essential steps before your first ride, Senada Bikes recommends
having a certified, reputable bike mechanic to check your work.
NOTICE: If you do not have the experience, skills, or tools to complete
assembly and fit, Senada Bikes highly recommends having a certified,
reputable bike mechanic complete these procedures as well as any future
adjustments or tuning.
NOTICE: A critical aspect of assembling your bike by Senada Bikes is securing
the front wheel and checking the tightness of the rear wheel axle nuts. These
mechanisms may become loose or unsecured during shipment or over time. The
torque and security of all wheel mounting hardware should be inspected upon
arrival and on a regular basis. Both wheels need to be properly secured before
operating your bike.
Mandatory Equipment and Use Locations
Before all rides, ensure you have all required and recommended safety equipment
and are following all laws pertaining to using an electric bike in your region.
Changing Components or Attaching Accessories
The use of non-original components or spare parts can jeopardize the safety of
your ebike, void your warranty and, in some cases, cause your ebike to not
conform with laws pertaining to your bike
Safety Check Before Each Ride
Always check the condition of your bike before you ride in addition to having
regular maintenance performed. If you are unsure of how to conduct a complete
check of the condition of your bike before every ride, you should consult a certified,
reputable bike mechanic for assistance. See the Pre-Ride Safety Checklist for
more information.
Electrical System
The electrical system on your ebike offers various levels of power assistance an
7
d
lighting for different operating conditions and user preferences. It is critical that you
familiarize yourself with all aspects of your ebike’s electrical system and check to
see that it is working correctly before every ride. The front and rear brake levers
contain safety power cutoff switches, which disable the hub motor’s assistance
when applied, and both levers should be checked for correct operation. The throttle
should provide smooth acceleration when gradually applied. If the throttle, brake
lever cutoff switches, pedal assistance, or lighting are functioning abnormally,
intermittently, or not working, please discontinue using your ebike immediately and
contact the Senada Bikes Product Support team for assistance.
Brake
8
s
Ensure brakes are working correctly, all braking system components are free from
damage, and properly secured. When you fully squeeze the brake levers, ensure
neither the front nor rear brake levers touch the handlebar. Take your bike to a
certified,reputable bike mechanic to have the brakes repaired if you find a problem.
Tires and wheels
Your wheels should always spin straight and must be repaired or replaced if they
wobble side to side or up and down when
spinning. If your wheels become untrue or spokes loosen, which can happen with
normal use, we recommend that a certified,reputable bike mechanic performs all
wheel tuning and truing operations on your bike from Senada Bikes. Do not attempt to
true wheels or tighten spokes unless you have adequate knowledge, tools, and
experience. Ensure the tires and inner tubes are in good working condition without
any visual damage and have the correct amount of air pressure. Always replace tires
and inner tubes with punctures, cuts, or damage before you ride. increase tire and
component wear, and make riding your bike unsafe.
Quick Release Levers
Quick release levers are located on your ebike for securing the seatpost . This
provide convenience to the user since they allow the seatpost to be adjusted without
tools. Since quick release levers can be loosened during transportation, or
accidentally between or during rides, it is important that you regularly check to
ensure these components are properly secured.
Accessories, Straps, and Hardware
Ensure all hardware is secured and all approved accessories are properly
attached per the specific component manufacturer’s instructions. It is good
practice to look over all hardware, straps, and accessories before each ride and
if you do discover something is wrong or find something you are not sure about,
have it checked by a certified, reputable bike mechanic
9
.
Suspension, Handlebar, Grips, and Seat Adjustments
Inhaltsverzeichnis
Andere SENADA Fahrrad Handbücher
