Senco SCN40R Bedienungsanleitung

SCN40R Rooﬁng Coil Nailer

The tough and dependable SCN40R straight-drive Rooﬁng Coil

Nailer eliminates tumbled nails. It’s loaded with the features you

asked for, yet is light enough for one-handed operation.

Applications:

For asphalt and ﬁberglass shingle nailing, for both new roofs

and rerooﬁng. Also for attaching waterproof tar paper, metal

drip edges, insulation board, and, with a special attachment,

vinyl and aluminum siding.

Features:

• Straight-drive nail alignment eliminates tumbled nails

• Weighs just 5.2 lbs. for easy one-handed operation

• Adjustable depth-of-drive for consistent and controllable

nail set

• Adjustable shingle guide

• Wearplates and side housing ribs reduce shingle abrasion

• Adjustable nail canister accommodates entire range of true

round-head rooﬁng nails

• NeverLube™design requires no lubrication

• One full year warranty

• Made in the U.S.A.

For additional information on how Senco fastening systems will

save you time, reduce costs, and increase quality, call your nearest

Authorized Senco Dealer or Distributor listed in the Yellow Pages

under “Staples,” or call our toll-free Action Line: 1-800-543-4596.

* “Restrictive Trigger” activated tools are

used for applications where precision nail

or staple placement is desired. You must

ﬁrst depress the safety element where

you want to drive a nail or staple and then

pull the trigger. After each nail or staple is

driven, completely release the trigger and

lift the tool off the work surface.

“Dual Action” activated tools are used

for applications where high-production

work is desired. There are two modes of

operation:

Bottom Fire Method:This method of

operation is sometimes called bounce

ﬁring. You must keep the trigger pulled

while moving the tool along the work sur-

face with a bouncing motion, depressing

the safety element where you want to

drive a nail or staple.

Trigger Fire Method: First depress the

safety element where you want to drive a

nail or staple and then pull the trigger.

For instructions on safe use of tools

with either of these activating mecha-

nisms, please refer to the Operating

Instructions or Customer Satisfaction and

Safety Reminder contained in your tool

carton.

The only way to work.®

Safety First.

SCN40R Rooﬁng Coil Nailer

™

Tool Speciﬁcations:

Weight: 5.2 lbs. (2.3 kg)

Height: 103⁄8" (264 mm)

Length: 93⁄4" (248 mm)

Nail Capacity: 120

Collation: Conical wound, angled coil wire

Operating Pressure: 70-120 psig (4.8-8.3 bar)

Mode of Operation: Tool is available with either Restrictive

Trigger or Dual Action activating mechanism.*

Hose Fitting:1⁄4" NPT

Fastener Speciﬁcations:

Inches 3⁄4"7⁄8"(1d) 1"(2d) 11⁄4"(3d) 11⁄2"(4d)

Millimeters 19 22 25 32 38

Shank Diameter .120 .120 .120 .120 .120

Part Number HJ11 HJ12 HJ13 HJ15 HJ17

Lengths

Available in both 3.2 and 7.2 carton count

Andere Handbücher für SCN40R

Andere Senco Nagelpistole Handbücher

Senco

Senco SFN30 Bedienungsanleitung

Senco

Senco SHP10 Bedienungsanleitung

Senco

Senco FinishPro 2N1 Bedienungsanleitung

Senco

Senco SFN2 Bedienungsanleitung

Senco

Senco Brad Nailer FinisPro 25 Bedienungsanleitung

Senco

Senco SFN30 Bedienungsanleitung

Senco

Senco AnchorPro60 Bedienungsanleitung

Senco

Senco FINISHPRO 10 Bedienungsanleitung

Senco

Senco GT50i-N/O Bedienungsanleitung

Senco

Senco SC7C Service-Handbuch

Senco

Senco Nail Gun Bedienungsanleitung

Senco

Senco FinishPro 32 Bedienungsanleitung

Senco

Senco FinishPro 18Mg Bedienungsanleitung

Senco

Senco SCN200 Anwendungshandbuch

Senco

Senco SN901XP Bedienungsanleitung

Senco

Senco SN70XP Bedienungsanleitung

Senco

Senco SCN56 Bedienungsanleitung

Senco

Senco SLS20XP Bedienungsanleitung

Senco

Senco RoofPro455XP Bedienungsanleitung

Senco

Senco FinishPro33Mg Bedienungsanleitung

Senco

Senco SFN40 Bedienungsanleitung

Senco

Senco FN81T1 Bedienungsanleitung

Senco

Senco Nailer SLP20XP Bedienungsanleitung

Senco

Senco SN902XP Bedienungsanleitung

Beliebte Nagelpistole Handbücher anderer Marken

Performance Tool

Performance Tool M643 Bedienungsanleitung

Hitachi

Hitachi VH650 - Fencing Nailer, Full Head Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Grizzly

Grizzly G1847 Bedienungsanleitung

Ryobi

Ryobi R18N18G Bedienungsanleitung

Black & Decker

Black & Decker 492848-00 Bedienungsanleitung

HOLZMANN MASCHINEN

HOLZMANN MASCHINEN TN90 Bedienungsanleitung

Metabo HPT

Metabo HPT NR 3690DC Bedienungsanleitung

Surtek

Surtek CN650 Abmessungen und Installationsanleitung

Makita

Makita GF600 Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Freeman

Freeman P50LSLW Bedienungsanleitung

Aicon PRO

Aicon PRO DAC4507 Bedienungsanleitung

DAJ

DAJ XR150A Bedienungsanleitung

Makita

Makita AN923 Bedienungsanleitung

Grizzly

Grizzly T20644 Bedienungsanleitung

Black & Decker

Black & Decker 90514937 Bedienungsanleitung

Alfamacchine

Alfamacchine Minigraf 4 Handbuch