Sennheiser MKE 1 Bedienungsanleitung

Deutsch

English

Français

Italiano

Español

Neder-

lands

MKE 1

Instructions for use

Contents

MKE 1 ............................................................................ 2

Features ............................................................................ 2

Delivery includes ............................................................. 2

Treble boost...................................................................... 3

Make-up protection ........................................................ 3

Attachment of the microphone.................................... 4

Attachment to the body................................................ 4

Attachment to clothing.................................................. 4

Wind protection............................................................... 7

Free-field frequency response curve........................... 7

Specifications ............................................................... 8

Accessories and spare parts ................................... 10

Manufacturer Declarations ..................................... 11

MKE 1

The MKE 1 is a high-quality, sub-miniature, sweat-

resistant clip-on condenser microphone. It features

excellent sound quality and rugged design. The

frequency response curve has been optimized for

stage, studio and reporting applications (ENG). The

MKE 1 is fitted with a very thin (only 1 mm) yet

extremely rugged cable, making this microphone an

ideal partner for all live sound applications.

Features

ySub-miniature microphone

yHigh maximum sound pressure level

yWide frequency response with adaptable treble

response

yThin (only 1 mm), flexible and rugged cable, low

in handling noise

yVery insensitive to the penetration of sweat due

to a special protective “umbrella” diaphragm

Delivery includes

1 MKE 1 microphone

1 MZC 1-1 frequency response cap, small

1 MZC 1-2 frequency response cap, large

3 make-up protectors

1 instruction manual

Treble boost

Your microphone is supplied

with two different frequency

response caps.

These caps allow you to adjust

the treble response of the

microphone (see “Free-field

frequency response curve” on

page 7). In addition, the large

frequency response cap attenuates wind noise by

approx. 15 dB and provides an extended protection

against the ingress of moisture.

Slip the cap of your choice onto the microphone until

it locks into place.

Make-up protection

When putting on make-up, protect the MKE 1 by

using the make-up protector. The make-up protector

is easy to install: just slip it onto the microphone

(with or without frequency response cap). The make-

up protector prevents make-up and hair spray from

penetrating the microphone.

Only remove the make-up protector after make-up

haas been completed.

MZC 1-1

MZC 1-2

Attachment of the microphone

Depending on the area of application, you can attach

the MKE 1 in different ways to either clothing or the

body.

Attachment to the body

Use a suitable means (adhesive tape, hair clip, etc.) to

attach the microphone to the hair or the body. For a

better hold, use the cable sleeves on the microphone

cable.

Attachment to clothing

Use the MZQ 02 clip to attach

the microphone to a lapel,

tie, collar, etc.

To fix the cable, snap one of the cable sleeves



into

the microphone holder and guide the cable through

the cable grip



You can rotate the microphone

holder in the clip in steps of 90°.

Adjust the cable in the cable grip

so that no cable loop is formed.

For thin cloths (e.g. silk), use the

outermost hole where the clip’s

contact pressure is the highest.







The MZM 2/MZM 10 magnetic mount set can be used

to unobtrusively attach the microphone to clothing.

The frictional force between the micro-phone and the

fabric is often sufficient to ensure that the

microphone is not displaced. For smooth and soft

cloths, the neckstrap (included in the delivery)

ensures that the microphone is not displaced from its

proper position.

You can also use the ZH 102 pin

mount (“Dracula” clip) to attach

the microphone to clothing

made of fabric that will not be

damaged by the pins. This

attachment withstands high

mechanical loads and is also a

very convenient solution if the

clothing does not have collars or

edges to which the MZQ 02 clip can be attached.

Wind protection

The quality of outdoor recordings and close miking

can be impaired by wind noise. First of all, use the

supplied MZC 1-2 frequency response cap.

An increased attenuation of wind noise can be

obtained by using the MZW 1 basket windshield



and the MZW 02 foam windshield



To begin with, use the MZW 1

basket windshield



which reduces

wind noise by approx. 22 dB.

With the additional MZW 02 foam

windshield



you can reduce wind

noise by a further 10 dB.

The MZW 1 and MZW 02 are

available as accessories.

Free-field frequency response curve

쐋



100 1*000 10*000

-30

-35

-40

-45

-50

-55

-60

-65

-70

dBV

MZC 1-1 MZC 1-2

Microphone

Specifications

MKE 1 -4 -4-3

Pick-up pattern omni omni

Frequency response 20–20,000 Hz 20–20,000 Hz

± 2.5 dB ± 2.5 dB

Sensitivity 5 mV/Pa 5 mV/Pa

(free field, no load) ± 2.5 dB ± 2.5 dB

(1 kHz)

Nominal impedance 1 k

액

1 k

액

Min. terminating 4.7 k

액

4.7 k

액

impedance

Equivalent noise level 27 dB 27 dB

A-weighted

(DIN IEC 651)

CCIR-weighted 39 dB 39 dB

(CCIR 468-1)

Max. SPL 142 dB 142 dB

Power supply via via

SK 5212, SK 5212,

SK 5012, SK 5012,

SK 250, SK 50, SK 250, SK 50,

SK 3063 SK 3063

Connector 3-pin special 3-pin special

connector connector

Color black beige

Cable length 1.6 m 1.6 m

Diameter of the 3.3 mm 3.3 mm

microphone

Weight (w/o 0.1 g 0.1 g

connector and cable)

Andere Handbücher für MKE 1

Inhaltsverzeichnis

Andere Sennheiser Mikrofon Handbücher

Sennheiser

Sennheiser evolution E945 Bedienungsanleitung

Sennheiser

Sennheiser Evolution E914 Bedienungsanleitung

Sennheiser

Sennheiser Evolution E 902 Bedienungsanleitung

Sennheiser

Sennheiser e 935 Bedienungsanleitung

Sennheiser

Sennheiser MKH 110 Bedienungsanleitung

Sennheiser

Sennheiser ew G4 Series Montageanleitung

Sennheiser

Sennheiser E 825 S - ANNEXE 787 Bedienungsanleitung

Sennheiser

Sennheiser Evolution E914 Bedienungsanleitung

Sennheiser

Sennheiser Black Fire BF516FE Bedienungsanleitung

Sennheiser

Sennheiser MZB 415 Bedienungsanleitung

Sennheiser

Sennheiser SKM 5200-II Bedienungsanleitung

Sennheiser

Sennheiser ME 105 - 06-02 Bedienungsanleitung

Sennheiser

Sennheiser HS 2 Bedienungsanleitung

Sennheiser

Sennheiser MMD 945-1 Bedienungsanleitung

Sennheiser

Sennheiser MD 441-U Bedienungsanleitung

Sennheiser

Sennheiser Evolution E 604 Bedienungsanleitung

Sennheiser

Sennheiser MK 8 Bedienungsanleitung

Sennheiser

Sennheiser MZC 1-1 Konfigurationshandbuch

Sennheiser

Sennheiser MKE 1 Bedienungsanleitung

Sennheiser

Sennheiser Evolution E 604 Bedienungsanleitung

Sennheiser

Sennheiser ME 88 Bedienungsanleitung

Sennheiser

Sennheiser evolution E945 Bedienungsanleitung

Sennheiser

Sennheiser SDC 8000 DV Bedienungsanleitung

Sennheiser

Sennheiser EvolutionWireless EW 300 Series Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung

JLab

JLab GO TALK Bedienungsanleitung

Renkforce

Renkforce TY-109 Bedienungsanleitung