Sennheiser SK 2000 Bedienungsanleitung

Sennheiser electronic GmbH & Co. KG

Am Labor 1, 30900 Wedemark, Germany

www.sennheiser.com

Publ. 12/16, 549128

SK 2000

Instruction manual

Contents

Important safety instructions .......................................................................... 2

The SK 2000 bodypack transmitter ................................................................ 3

Areas of application ........................................................................................ 3

The frequency bank system .......................................................................... 4

Delivery includes .................................................................................................. 5

Product overview ................................................................................................. 6

Overview of the SK 2000 bodypack transmitter ....................................... 6

Overview of the displays ................................................................................ 7

Putting the bodypack transmitter into operation ....................................... 8

Inserting the batteries/accupack ................................................................. 8

Charging the accupack .................................................................................... 8

Connecting the microphone cable/instrument cable ............................... 9

Attaching the bodypack transmitter to clothing ................................... 10

Using the bodypack transmitter ................................................................... 11

Switching the bodypack transmitter on/off ........................................... 11

Deactivating the lock mode temporarily ................................................. 12

Muting the audio signal or deactivating the RF signal ......................... 13

Selecting a standard display ...................................................................... 15

Using the operating menu ............................................................................. 16

The buttons .................................................................................................... 16

Overview of the operating menu ............................................................... 16

Working with the operating menu ........................................................... 18

Synchronizing the bodypack transmitter with a receiver ...................... 20

Synchronizing the bodypack transmitter with the receiver –

individual operation ..................................................................................... 20

Synchronizing bodypack transmitters with receivers –

multi-channel operation .............................................................................. 20

Cleaning the bodypack transmitter ............................................................. 21

If a problem occurs ... ....................................................................................... 21

Specifications .................................................................................................... 23

For further information, visit the SK 2000 product page on

our website at www.sennheiser.com.

Important safety instructions

• Read this instruction manual.

• Keep this instruction manual. Always include this instruction manual

when passing the product on to third parties.

• Heed all warnings and follow all instructions.

• Use only a cloth for cleaning the product.

• Do not place the product near any heat sources such as radiators, stoves,

or other devices (including amplifiers) that produce heat.

• Only use attachments/accessories specified by Sennheiser.

• Refer all servicing to qualified service personnel.

Servicing is required if the product has been damaged in any way, liquid

has been spilled, objects have fallen inside, the product has been

exposed to rain or moisture, does not operate properly or has been

dropped.

• WARNING: To reduce the risk of short circuits, do not use the product

near water and do not expose it to rain or moisture.

Intended use

Intended use of the SK 2000 bodypack transmitter includes:

• having read this instruction manual, especially the chapter “Important

safety instructions”,

• using the product within the operating conditions and limitations

described in this instruction manual.

“Improper use” means using the product other than as described in these

instructions, or under operating conditions which differ from those

described herein.

The SK 2000 bodypack transmitter

This bodypack transmitter is part of the 2000 series. With this series,

Sennheiser offers high-quality state-of-the-art RF transmission systems

with a high level of operational reliability and ease of use. Transmitters

and receivers permit wireless transmission with studio-quality sound.

Features of the 2000 series:

• Optimized PLL synthesizer and microprocessor technology

•HDX noise reduction system

•P

lottonesquelchcontrol

• True diversity technology

• Switching bandwidth of up to 75 MHz

• Increased immunity to intermodulation and interferences in multi-

channel operation

Areas of application

The bodypack transmitter can be combined with the EM 2000 or EM 2050

rack-mount receiver. The receivers are available in the same UHF

frequency ranges and are equipped with the same frequency bank system

with factory-preset frequencies. An advantage of the factory-preset

frequencies is that:

• a transmission system is ready for immediate use after switch-on,

• several transmission systems can be operated simultaneously on the

preset frequencies without causing intermodulation interference.

Transmitter Optional accessories Receivers

SK 2000 •Clip-onmicrophones:

MKE 1, ME 102,

ME 104, ME 105*

EM 2000 receiver

EM 2050 twin receiver

• Headmics:

HSP 2, HSP 4*

• Instrument cable:

CI 1-4*

* each fitted with a 3-pin special audio connector

543.200

B.Ch:20.64

PEAK

MUTE

EQ:

+ 12dB

-10

040

-20

-30

-40

MHz

TrueDiversity Receiver EM 2000 **2000**

SKM2000

543.200

**2000** **2000**

B.Ch: 20.64

PEAK

MUTE

EQ:

+ 12dB

-10

040

-20

-30

-40

MHz

543.200

B.Ch: 20.64

PEAK

MUTE

EQ:

+ 12dB

-10

040

-20

-30

-40

MHz

TrueDiversity Receiver EM 2050

SKM2000 SKM2000

The SK 2000 bodypack transmitter

Overview of the microphones and instrument cables:

The frequency bank system

The bodypack transmitter is available in 6 UHF frequency ranges with up

to 3,000 transmission frequencies per frequency range:

Each frequency range (Aw–Ew, Gw, GBw) offers 26 frequency banks with

up to 64 channels each:

Microphone/instrument cable Type

Pick-up pattern

MKE 1 clip-on microphone

condenser

omni-directional

ME 102 clip-on microphone cardioid

ME 104 clip-on microphone cardioid

ME 105 clip-on microphone super-cardioid

HSP 2 headmic omni-directional

HSP 4 headmic cardioid

CI 1-4 instrument cable – –

500 600 700 800

Range Gw:

558 – 626

Range Bw:

626 – 698

Range Cw:

718 – 790

Range Dw:

790 – 865

516 – 558

Range Aw:

GBw:

606 –678

Range

Frequency bank 1 ... 20

Frequency bank U1 ... U6

Channel 64 – frequency preset

Channel 1– frequency preset

Channel 2– frequency preset

Channel 64 – freely selectable frequency

Channel 1– freely selectable frequency

Channel 2– freely selectable frequency

Delivery includes

Each of the channels in the frequency banks “1” to “20” has been factory-

preset to a fixed frequency (frequency preset). The factory-preset

frequencies within one frequency bank are intermodulation-free. These

frequencies cannot be changed.

For an overview of the frequency presets, please refer to the supplied

frequency information sheet. Updated versions of the frequency informa-

tion sheet can be downloaded from the corresponding product page on our

website at www.sennheiser.com.

The frequency banks “U1” to “U6” allow you to freely select and store

transmission frequencies. It might be that these transmission frequencies

are not intermodulation-free.

Delivery includes

The packaging contains the following items:

1 SK 2000 bodypack transmitter

2 AA size batteries, 1.5 V

1 instruction manual

1 frequency information sheet

1 supplement “Framework requirements and restrictions on the use of

radio microphones”

Product overview

Overview of the SK 2000 bodypack transmitter

쐃Microphone/instrument input

(MIC/LINE), 3-pole special audio

socket, lockable

쐇MUTE switch

쐋Antenna

쐏Operation and battery status

indicator, red LED:

lit = ON

flashing = LOW BATT

쐄Audio overmodulation indicator,

yellow LED:

lit = AF PEAK

쐂Charging contacts

쐆SET button

쐊UP/DOWN button 왖/왔

쐎Battery compartment

쐅Battery compartment cover

(metal)

쐈Battery compartment catches

쐉Infra-red interface

씈ON/OFF button

(serves as the ESC (cancel) key in

the operating menu)

씉Display panel, backlit in orange

쐋

쐏

쐆

쐂

씈

쐉

쐂

쐎

쐈

쐊

쐅

씉

쐄

쐇

쐃

Product overview

Overview of the displays

After switch-on, the bodypack transmitter displays the standard display

“Frequency/Name”. For further illustrations and examples of the different

standard displays, refer to page 15. The display backlighting is automati-

cally reduced after approx. 20 seconds.

Display Meaning

햲Audio level “AF”Modulation of the bodypack transmitter

When the audio input level is excessively high,

the “AF” display shows full deflection and, in

addition, the yellow AF PEAK LED 쐄lights up:

햳Frequency Current transmission frequency

햴Name Freely selectable name of the transmitter

햵Transmission icon RF signal is being transmitted

햶Lock mode icon Lock mode is activated

햷“P” (pilot tone) Pilot tone transmission is activated

햸“MUTE”Microphone or line input is muted

햹Battery status Charge status:

MHz

543.200

**2000**

MUTE

햳 햴

햲

햶

햵

햹햸햷

쐄

approx. 100%

approx. 70%

approx. 30%

charge status is critical

, the red

LOW BATT LED 쐏

is flashing:

쐏

Putting the bodypack transmitter into operation

Putting the bodypack transmitter into

operation

Inserting the batteries/accupack

For powering the bodypack transmitter, you can either use two 1.5 V AA

size batteries or the rechargeable Sennheiser BA 2015 accupack or the

DC 2 power adapter (accessories, visit www.sennheiser.com).

왘Open the battery compartment by pushing the two catches 쐈in the

direction of the arrows and open the cover 쐅.

왘Insert the two batteries or the accupack as shown above. Please

observe correct polarity when inserting the batteries/accupack.

왘Close the battery compartment.

The battery compartment cover 쐅locks into place with an audible

click.

Charging the accupack

To charge the BA 2015 accupack (accessory, visit www.sennheiser.com)

installed in the bodypack transmitter:

왘Insert the bodypack transmitter into the L 2015 charger (accessory,

visit www.sennheiser.com).

The L 2015 charger can only charge the combination BA 2015

accupack/bodypack transmitter. Standard batteries (primary

cells) or individual rechargeable battery cells cannot be charged.

쐅쐈

쐅

쐂

Putting the bodypack transmitter into operation

Connecting the microphone cable/instrument cable

The audio input is designed for the connection of both condenser micro-

phones and instruments (e.g. guitars). DC powering of the condenser

microphones is via the MIC/LINE socket 쐃(3-pole special audio socket).

왘Use one of the recommended Sennheiser microphones or the CI 1-4

instrument cable (see page 3).

왘Connect the 3-pin special audio connector 씊from the Sennheiser

microphone or instrument cable to the MIC/LINE socket 쐃.

왘Lock the 3-pin special audio connector by screwing down the coupling

ring 씋.

왘Via the operating menu (“Sensitivity” menu item), adjust the sensi-

tivity of the microphone/line input.

쐃

씋

씊

Andere Handbücher für SK 2000

Inhaltsverzeichnis

Andere Sennheiser Sender Handbücher

Sennheiser

Sennheiser SK 2250 Bedienungsanleitung

Sennheiser

Sennheiser SK 5212-II - ANNEXE 762 Bedienungsanleitung

Sennheiser

Sennheiser TS 2012 Bedienungsanleitung

Sennheiser

Sennheiser SR 2000 IEM Bedienungsanleitung

Sennheiser

Sennheiser SK 500 G3 Bedienungsanleitung

Sennheiser

Sennheiser SK 5212-II Bedienungsanleitung

Sennheiser

Sennheiser SK 5012 Bedienungsanleitung

Sennheiser

Sennheiser SKP 500 Bedienungsanleitung

Sennheiser

Sennheiser SK 300 Bedienungsanleitung

Sennheiser

Sennheiser SK 500 G2 Bedienungsanleitung

Sennheiser

Sennheiser SK 3063 Bedienungsanleitung

Sennheiser

Sennheiser SR 2050 IEM Bedienungsanleitung

Sennheiser

Sennheiser SK 1013-6 Bedienungsanleitung

Sennheiser

Sennheiser SI 29-5 Bedienungsanleitung

Sennheiser

Sennheiser SK 1010-9 Bedienungsanleitung

Sennheiser

Sennheiser SK 3063-U Bedienungsanleitung

Sennheiser

Sennheiser SK 2020 D Bedienungsanleitung

Sennheiser

Sennheiser SR 2000 IEM Bedienungsanleitung

Sennheiser

Sennheiser SK 50 UHF Bedienungsanleitung

Sennheiser

Sennheiser EM 300 G3 - 01-09 Bedienungsanleitung

Sennheiser

Sennheiser SK 250 - ANNEXE 317 Bedienungsanleitung

Sennheiser

Sennheiser SI 434 Bedienungsanleitung

Sennheiser

Sennheiser SK 5212 Bedienungsanleitung

Sennheiser

Sennheiser SK 500 G2 Abmessungen

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung