Sensoray 3011 Bedienungsanleitung
SENSORAY | p. 503.684.8005 | email:info@SENSORAY.com | www.SENSORAY.com
7313 S Tech Center Drive | Portland, OR 97203
HD IP Camera with H.264 Compression
Hardware Manual
Model 3011 | Ver. 1.0.1 | February 2015
Table of Contents
LIMITED WARRANTY.......................................................................................................3
INTRODUCTION................................................................................................................4
CONNECTORS....................................................................................................................5
WEB PAGE INTERFACE.....................................................................................................7
Main menu........................................................................................................................7
Li e stream iew...............................................................................................................8
RTSP streams..................................................................................................................10
Stream Control................................................................................................................12
Stream Configuration.....................................................................................................14
Stream Configuration - Video.........................................................................................16
Stream Configuration - Snapshot...................................................................................17
Clock Configuration........................................................................................................18
Network Management....................................................................................................19
Step 1 - Setting up a temporary IP address.................................................................20
Step 2 – Setting up a permanent IP address...............................................................21
User management..........................................................................................................22
Firmware update............................................................................................................25
Firmware reset...............................................................................................................26
Tra ersing routers..........................................................................................................27
SPECIFICATIONS.............................................................................................................28
REVISION HISTORY........................................................................................................29
2
Limited warranty
Sensoray Company, Incorporated (Sensoray) warrants the hardware to be free from defects
in material and workmanship and perform to applicable published Sensoray specifications
for two years from the date of shipment to purchaser. Sensoray will, at its option, repair or
replace equipment that proves to be defective durin the warranty period. This warranty
includes parts and labor.
The warranty provided herein does not cover equipment subjected to abuse, misuse,
accident, alteration, ne lect, or unauthorized repair or installation. Sensoray shall have the
ri ht of final determination as to the existence and cause of defect.
As for items repaired or replaced under warranty, the warranty shall continue in effect for
the remainder of the ori inal warranty period, or for ninety days followin date of shipment
by Sensoray of the repaired or replaced part, whichever period is lon er.
A Return Material Authorization (RMA) number must be obtained from the factory and
clearly marked on the outside of the packa e before any equipment will be accepted for
warranty work. Sensoray will pay the shippin costs of returnin to the owner parts that are
covered by warranty. A restockin char e of 25% of the product purchase price will be
char ed for returnin a product to stock.
Sensoray believes that the information in this manual is accurate. The document has been
carefully reviewed for technical accuracy. In the event that technical or typo raphical errors
exist, Sensoray reserves the ri ht to make chan es to subsequent editions of this document
without prior notice to holders of this edition. The reader should consult Sensoray if errors
are suspected. In no event shall Sensoray be liable for any dama es arisin out of or related
to this document or the information contained in it.
EXCEPT AS SPECIFIED HEREIN, SENSORAY MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, AND SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. CUSTOMER’S RIGHT TO RECOVER DAMAGES
CAUSED BY FAULT OR NEGLIGENCE ON THE PART OF SENSORAY SHALL BE LIMITED
TO THE AMOUNT THERETOFORE PAID BY THE CUSTOMER. SENSORAY WILL NOT BE
LIABLE FOR DAMAGES RESULTING FROM LOSS OF DATA, PROFITS, USE OF PRODUCTS,
OR INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE
POSSIBILITY THEREOF.
Third party brands, names and trademarks are the property of their respective owners.
3
Introduction
Model 3011 is a miniature HD IP camera that fits in a 2.25 x 2.00 x 1.20 inch enclosure
(including the lens). The camera is capable of pro iding an H.264 compressed stream at
the standard HD resolution (1080p30), or multiple streams at lower resolutions. Model
3011 consumes less than 3 Watts using either POE option, or an external 5 V DC power
supply. Configuration and control are performed using a web interface with optional
password protection. Network settings (IP address, ports) can be changed to
accommodate arious network configurations. All settings are stored in non- olatile
memory and restored after power up.
Model 3011 is capable of pro iding 2 simultaneous ideo streams, for example, a high
quality stream for archi ing on the remote ser er and a lower bitrate stream for li e
iewing on hand-held de ices.
4
Connectors
Fig.1. Model 3011 connectors.
Left to right:
•Ethernet connector;
•GPIO and power terminal block.
Below:
•status LED;
•configuration button.
Model 3011 pro ides 1 optoisolated input and 1 optoisolated output. The GPIO
schematic is shown on Fig.2.
5
Fig.2. Optoisolated GPIO.
GPIO requires power (pins GPIO-VCC and GND) in the range of 3 to 5 VDC. The input
pin (GPI-A) is connected to an anode of an input LED ia a 150 Ohm resistor. Input
diode’s current must be kept between 7 and 15 mA (with a forward oltage of 1.5 V). For
additional information on the optocoupler please refer to the documentation on A ago
ACSL-6210.
Table 1. GPIO and power terminal block pinout (left to right):
1 GPO-COL
2 GPI-A
3 GPIO-VCC
4 GPO-GND
5 POWER GND (-)
6 POWER +5 V DC
6
Web page interface
Main menu
Main Menu is the default screen displayed when the browser connects to the 3011. The
default IP address as shipped is 192.168.30.11. Connect to the board by typing this
address in the browser's address bar.
Note: if the default IP address can not be accessed on your network, please refer to the
Network Configuration section below.
7
Live stream view
Li e stream iew windows display the li e iew of one of the two streams a ailable from
the 3011. To access the window click on one of the links (Li e View/Stream A or Li e
View/Stream B) in the na igation bar. Streams are configured as described below in
sections “Stream Controls” and “Stream Configuration”.
Li e View will display a Multipart-Replace JPEG image if the stream is configured a
MJPEG VES. This mode is not supported in Microsoft Internet Explorer browser.
Li e View will display a Flash ideo player with H264 ideo and AAC audio if the stream
is configured as H264.
8
Li e View is not supported when the stream is configured as MPEG4.
The web player is using Flash RTMP protocol on TCP port 1935.
9
RTSP streams
Li e View / RTSP Streams page pro ides a list of rtsp:// URLs which can be iewed
using VLC or another RTSP-compatible player. The player is responsible for requesting
the ideo and starting and stopping the stream.
Right click on the link that corresponds to current configuration of selected stream (A or
B), copy link address, and paste it into the player's stream address field, as shown below
for VLC.
10
Inhaltsverzeichnis
