SEWOO LK-P34 Bedienungsanleitung
P34 ENG Rev. D 01/2021
28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi-do ,18103, Republic of Korea
+82-31-8077-5000 / +82-31-624-5310 / http://www.miniprinter.com
MOBILE PRINTER(Wi-Fi & Bluetooth)
All specications are subject to change without notice
the user that changes or modications not expressly approved by the J. STEPHEN Lab.,
Ltd.responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The responsible party for Supplier's Declaration of Conformity must be located within
the United States, so you have to include following information in manual.
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including
interference that may cause undesired operation.
19700 S Vermont Ave Ste 200 Torrance, CA 90502 | USA
26188 Edewecht, Holljestr.9 | Germany
Paseo de la Reforma No. 265 Piso 2.Ocina SBC. Col.
Cuauhtémoc, C.P. 06500 Ciudad de Mexico | Mexico
Room 902, No. 7, Lane 118, Xiaojishan Road, Sheshan Town,
Songjiang District, Shanghai | China
This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical and electronics
equipment. For more detailed information about recycling of this product,
please contact your local city oce, your household waste disposal service
or the shop where you purchased the product.
2
For better safety and reliability, adhere to the following precautionary measures.
Read and follow the instructions carefully before operation of the product.
Prohibition Must follow
Do not disassemble
Unplug the power from the
outlet
Grounding to prevent
electric shock
Do not handle the product with
wet hands
Failure to follow these instructions could result in re, electric shock,
other injuries, or property damage.
Potential risk of
electric shock or re
Potential risk of
electric shock or re
Potential risk of
electric shock or re
Potential risk of
electric shock or re
3
Failure to follow these instructions could result in re, electric shock,
other injuries, or property damage.
Turn o the power
using the power
button
Potential risk of
malfunction, electric
shock, or re. When
the product needs to
be repaired, please
contact your reseller
Failure to follow these instructions could result in re, electric shock,
other injuries, or property damage.
May cause
damage or injury
Potential risk of re
or unit malfunction
Potential risk of re
or unit malfunction
Potential risk of
re or property
damage
4
1. Unpacking 6
2. Product Overview 7
3. AMC(Advanced manual cutter) Button 8
4. Control Panel Usage 9
5. Paper Installation 10
6. Battery 11
6-1. Battery Installation 11
6-2. Battery Removal 12
6-3. Battery Charging 13
6-4. Charging Cradle (OPTIONAL) 14
7. Belt Strap 15
8. Self Test 16
9. Peripheral Connection 18
9-1. Bluetooth Connection (Optional) 18
9-2. Wi-Fi Connection (Optional) 18
9-3. NFC Connection (Optional) 19
9-4. Interface Cable connection 20
5
10. Cleaning the Printer 21
11. JAM Error 22
12. Roll Media Specication 23
13. Black Mark 24
14. Printer Specication 25
15. Utilities 27
16. S/W 28
6
Printer Battery Charger USB Cable
Quick Manual CD (manual) Roll Paper Belt Strap
AC Cord Adaptor Shoulder Strap
ERROR
FULLEMPTYERROR
FULLEMPTY
ERROR
FULLEMPTYERROR
FULLEMPTY
4BC-XX(Charging Cradle) Battery Cradle(Charging Cradle)
7
POWER Button
Paper FEED Button USB
DC POWER
-Button Up: Cutting the paper
-Button down: Opening the cover
AMC Button
Strap Bracket
Battery
Inhaltsverzeichnis
Andere SEWOO Drucker Handbücher
SEWOO
SEWOO LK-P20B Bedienungsanleitung
SEWOO
SEWOO LK-P43 Benutzerhandbuch
SEWOO
SEWOO LK-PXX Bedienungsanleitung
SEWOO
SEWOO SLK-TE25 Bedienungsanleitung
SEWOO
SEWOO LK-P43W Bedienungsanleitung
SEWOO
SEWOO LK-P32 Bedienungsanleitung
SEWOO
SEWOO SLK-T21EB Series Bedienungsanleitung
SEWOO
SEWOO SLK-T32EB Series Bedienungsanleitung
SEWOO
SEWOO LK-P41 Installationsanleitung
SEWOO
SEWOO SLK-D10 Bedienungsanleitung
SEWOO
SEWOO SLK-TE32 Series Bedienungsanleitung
SEWOO
SEWOO LUKHAN LK-P21B Bedienungsanleitung
SEWOO
SEWOO LK-P30W Bedienungsanleitung
SEWOO
SEWOO SLK-TE122 Bedienungsanleitung
SEWOO
SEWOO LK-P43 Bedienungsanleitung
SEWOO
SEWOO LK-P400 Bedienungsanleitung
SEWOO
SEWOO SLK-TS400 Bedienungsanleitung
SEWOO
SEWOO LK-B10 Bedienungsanleitung
SEWOO
SEWOO SLK-TL12X Series Bedienungsanleitung
SEWOO
SEWOO LK-P12W Bedienungsanleitung
