Shannon AFF/D 135 Bedienungsanleitung

User’s Guide

English

Plastic bending machine

AFF/D 135

12-2-2015

-1-

Matt Asselman

1USER’S GUIDE

Plastic bending machine

AFF/D 135

No part of this User's Guide may be photocopied, altered or

translated without prior written consent.

Information contained in this User's Guide is subject to change

without notice

AFF/D 135

12-2-2015

-2-

Matt Asselman

2TECHNICAL DATA

type

AFF/D 135

Assembly

Control unit

Max.

Upper heating element

Max

Pressure bars

Electrical

Control unit

Voltage

220 –240 V AC

Power

520VA

Fuse

2,5 AT x2

Timer unit

Voltage

220 –240 V AC

Power

5VA

Fuse

2,5 AT x2

connection

CEE 7/4 16A 2P+A

Network connection

CEE 7/4 16A 2P+A

Network circuit breaker

Max. 16 A

Pneumatic

Air

Unlubricated clean dry air

Maximum

6 bar

Minimum

5 bar

Operating pressure

6 bar

Coupling

Quick action coupling

Mechanical

Gradation of stop

0-500 mm

dimensions

[LxWxH]

850 x 1510 x 380 mm

weight

200 Kg

Functional

Bending width

1350 mm

Sheet thickness

0,2 - 1 mm

Temperature element

Max

220 ◦C

Ambient

Temperature

18-30 C

Humidity of the air

50-80 % (no condensed)

Miscellaneous

set of socket screws keys

1 set [1½, 3, 5 mm]

Spare fuse

4 x [6.3x32 2,5 AT]

AFF/D 135

12-2-2015

-3-

Matt Asselman

3CONTENTS

2 Technical data 2

3 Contents 3

4 Introduction 4

5 Description of the machine 5

6 Safety instructions 6

7 Safety precautions 8

8 Legend 9

8.1 Summary 9

8.2 Air/Timer Unit 10

8.3 Timer Unit 10

8.4 Control Unit 11

9 Installation 12

9.1 Assembly 12

9.2 Connecting air/timer unit 12

9.3 Connecting foot switch 12

9.4 Connecting compressed air 12

9.5 Connecting power 12

10 Operation 13

10.1 Preperation 13

10.2 Switching on heating element 13

10.3 Setting temperature 13

10.4 Setting cycle time 13

10.5 Foot switch 14

10.6 Setting air pressure 14

11 Adjustment 15

11.1 Safety precautions 15

11.2Pressure bar 15

11.3Upper element height 15

11.4 Stop 16

11.5Angular stop 16

12 Maintenance 17

12.1Safety precautions 17

12.2 Lubrication points 17

12.3 Profiles 17

12.4 Water seperator 17

13 Fuses 18

Annexes 19

A Options 19

Accessories 19

B Equipment 20

Service and warranty 21

AFF/D 135

12-2-2015

-4-

Matt Asselman

4INTRODUCTION

Congratulations on purchasing Shannon’s plastic bending machine AFF/D 135. Read this guide

completely before installing and using the machine.

We want to keep in contact and to know how you find the AFF/D 135. We are always willing to

advise on the use of the machine and its accessories.

SHANNON BV

Turfschipper 11-13

2292 JC Wateringen

P.O. box 84

2290 AB WATERINGEN

the Netherlands (EC)

Tel: +31 (0)174-225240

Fax: +31 (0)174-225249

E-mail: [email protected]

Website: www.shannon.nl

AFF/D 135

12-2-2015

-5-

Matt Asselman

5DESCRIPTION OF THE MACHINE

The Shannon AFF/D bending machine is a semi-automatic machine for the production of large series of

items with one or two bends for the plastic sheet processing industry.

The machine has two heating elements. The temperature of which can be adjusted by electronic controls.

The heating elements which are mounted in the pneumatically operated top frame are adjustable in height

in respect of the working surface.

One of the heating elements can be moved in the top frame to create a certain distance between the 2

bends.

The workpiece can be heated from one side by contact, reducing the production cycle time and making it

possible to bend sheet up to 1 mm thick.

The top frame is switched on independently of the control unit and is controlled by an adjustable timer.

The working surface is made of scratch-resistant solid core material to support the plastic sheet.

When heated, thermoplastics become so flexible that they can be shaped. When a plastic sheet is heated to its

softening point in a narrow zone, if can be bent to any angle desired.

The bending radius is determined by the width of the heated zone. The zone is determined by the thickness of

the material and the type of heating element.

Every plastic has its specific softening point. By coordinating the temperature, heated zone and the heating

time all kinds of thermoplastic can be processed.

AFF/D 135

12-2-2015

-6-

Matt Asselman

6SAFETY INSTRUCTIONS

To ensure safety when using the machine you should read this

User's Guide carefully and follow the safety instructions closely

Attention!

The machine contains a section where there is a risk of trapping.

Attention!

The machine contains parts, which are hot. Touching them will

cause burns.

Allow hot parts to cool sufficiently (at least 10 minutes) before

touching them.

Never touch the heating elements when the machine is in

operation.

Always wear close-fitting clothing.

Be particularly careful of sleeves and always tie back long hair.

Never leave objects on the working surface.

The machine may only be used for heating narrow zones in flat

plastic sheet.

Any other use could lead to very hazardous situations or cause

damage to the machine!

The plastic sheets that have to be bent may never be thicker than

1 mm.

Before commissioning and servicing always check the connection

cable and plug for defects.

When servicing switch off the machine and remove the plug from

the socket.

AFF/D 135

12-2-2015

-7-

Matt Asselman

Before use always check that all the pressure bars and heating

elements in the top frame are firmly attached.

Never operate the machine if anyone is standing close behind or

beside it.

Never introduce objects or material into the machine from the

rear.

Never leave the machine unattended without switching it off.

AFF/D 135

12-2-2015

-8-

Matt Asselman

7SAFETY PRECAUTIONS

EMERGENCY STOP

There is an emergency stop button (C) at the front of the air/timer unit, which can be reached by

the operator from the normal working position.

Pressing the emergency stop button switches off the timer and the top frame lifts up. The button

remains pushed in.

Resetting of the emergency button comes to pass by turning the button to the right.

The machine is ready to use again.

ONLY USE THE EMERGENCY STOP BUTTON WHEN:

oRisk of trapped limbs.

oDefects in the timer, so the machine fails to open after the pre-set time.

oAn outbreak of fire or situations involving a risk of fire.

oAny situation that might present a risk to people or animals.

oAny other situation, that might present a risk or cause, damage to the machine and/or

objects.

AFF/D 135

12-2-2015

-9-

Matt Asselman

8LEGENDA

SUMMARY

The legenda of the entire machine.

Topframe

Heating element

Control unit

Pressure bar

Stop

Gradation

Working surface

Timer unit

Flip

Vacum

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Shannon Cutter Handbücher

Shannon

Shannon HRP 220 Bedienungsanleitung

Shannon

Shannon HRT 65 Bedienungsanleitung

Shannon

Shannon HRP/D Bedienungsanleitung

Shannon

Shannon ABM-D 135 Bedienungsanleitung

Shannon

Shannon HRP/S Bedienungsanleitung

Shannon

Shannon HR 220-300 Bedienungsanleitung

Shannon

Shannon HRT/D 300 Bedienungsanleitung

Shannon

Shannon HRT 220 Bedienungsanleitung

Shannon

Shannon HRK 65 Bedienungsanleitung

Beliebte Cutter Handbücher anderer Marken

Milwaukee

Milwaukee HEAVY DUTY M12 FCOT Bedienungsanleitung

Makita

Makita DCS552 Bedienungsanleitung

SignWarehouse.com

SignWarehouse.com Bobcat BA-60 Bedienungsanleitung

Makita

Makita 4112HS Bedienungsanleitung

GEISMAR STUMEC

GEISMAR STUMEC MTZ 350S Bedienungsanleitung

Hitachi

Hitachi CM 4SB2 Fehlerbehebungshandbuch

Dexter Laundry

Dexter Laundry 800ETC1-20030.1 Bedienungsanleitung

GCC Technologies

GCC Technologies AFJ-24S Bedienungsanleitung

DeWalt

DeWalt XR LI-ION DCS350N Bedienungsanleitung

Baudat

Baudat ES1 Bedienungsanleitung

Mafell

Mafell ZAF 200 Leitfaden

Makita

Makita 4100NH Bedienungsanleitung

Formax

Formax FD 574 Bedienungsanleitung

EINHELL

EINHELL TE-MA 1500 Bedienungsanleitung

Husqvarna

Husqvarna Cut-n-Break K 760 Bedienungsanleitung

CLEAN ROOM DEVICES

CLEAN ROOM DEVICES CRD130SS Bedienungsanleitung

TRI tool

TRI tool 301A Bedienungsanleitung

Roller

Roller King 1 1/4 Bedienungsanleitung