SHARK ZONE M50 9
9.1 DPI Setting
In this menu, you can set individual DPI values simply by cli-
cking on the bar. If certain steps are not required, then
deactivate it by clicking the corresponding yellow button.
The higher the value, the more sensitive your mouse res-
ponds.
9.2 Polling Rate
The polling rate is the query rate between PC and mouse.
The higher the Hertz (Hz) value, the shorter the time bet-
ween the two queries. The polling rate allows four in-
crement settings:
125 Hz, 8 ms
250 Hz, 4 ms
500 Hz, 2 ms
1000 Hz, 1 ms
9.3 Mouse Speed
There are 11 increments to the adjustment of the mouse
speed. The higher the value, with the same mouse mo-
vement, the faster the cursor on the screen moves.
9.4 Double-Click Speed
In this menu, you can set how far two clicks are allowed
to be apart while still being recognized as a double-click.
The higher the value, the faster the clicks must follow
each other. The double-click speed can be adjusted by
11 levels.
9.5 Scroll Speed
When scrolling, the mouse wheel moves the image to the
selected number of rows or screen page. The standard
setting is three lines. At a lower value, scrolling with the
mouse wheel must be more frequent to achieve the same
distance. With a higher value, less frequently.
9.6 Angle Snapping
Angle snapping corrects uneven movements by the
mouse into straight movements automatically. This is
primarily beneficial in games and graphics programs. For
example, the higher the value, the easier it is to keep focus
on a pixel object without the cursor drifting off by slight
movements. Angle snapping can be adjusted up to 10
different increments. The higher the level, the stronger
the effect.
B
A
C
D
E
F
