Shark Ninja Master Prep Professional Bedienungsanleitung

www.ninjakitchen.com

1 877 646-5288

QB1004Q

OWNER’S GUIDE

Master Prep®Professional

21-877-646-5288

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES,

BASIC SAFETY PRECAUTIONS SHOULD

ALWAYS BE FOLLOWED, INCLUDING THE

FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING

YOUR NUTRI NINJA®MASTER PREP®

PROFESSIONAL.

POLARIZED PLUG

WARNING: To reduce the risk of electric

shock, this appliance has a polarized plug (one

blade is wider than the other). This plug will ﬁt

into a polarized outlet only one way. If the plug

does not ﬁt fully into the outlet, reverse the

plug. If it still does not ﬁt, contact a qualiﬁed

electrician to install the proper outlet. DO NOT

modify the plug in any way.

WARNING: Extension cords are not

recommended for use with this product.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK OR INJURY:

1 CAUTION: Blade assemblies are

sharp. Handle with care. When

handling the blade assemblies, always

hold by the upper shaft.

CAUTION: Blade Assembly is

removable and not locked in place. If

pouring with the splash guard removed,

always remove the Blade Assembly ﬁrst.

If using pour spout, make sure the splash

guard is secure on the jar by ﬁrmly

pressing on the splash guard.

3 CAUTION: Do not blend hot liquids.

4To protect against electric shock, DO NOT

immerse cord, plug or any part of the main

unit in water or any other liquids.

5DO NOT allow the appliance to be used by

children. Close attention is necessary when

used near children. This is not a toy.

6 DO NOT let cord hang over edge of table or

counter, or touch hot surfaces including the

stove.

7Never leave an appliance unattended when

in use.

8 DO NOT operate any appliance with

a damaged cord or plug, or after the

appliance malfunctions, has been dropped

or damaged in any manner. Return the

appliance to SharkNinja Operating LLC for

examination, repair or adjustment.

www.ninjakitchen.com 3

9 DO NOT abuse the power cord. Never carry

the appliance by the power cord or yank it

to disconnect from electrical outlet; instead

grasp the plug and pull to disconnect.

10 Unplug appliance from outlet when not in

use, before putting on or taking off parts

and beforecleaning.

11 DO NOT operate this appliance on or near

any hot surfaces (such as gas or electric

burner, or in a heated oven).

12 The use of attachments or accessories

including canning jars, not recommended by

the manufacturer may result in ﬁre, electric

shock or personal injury.

13 Always use this appliance on a dry, stable

work surface away from water.

14 DO NOT remove the motor head before the

chopping blades have stopped turning.

15 DO NOT attempt to sharpen blades.

16 Immediately release the On/Off pulse button

on the motor head in the event that the

appliance malfunctions during use.

17 To reduce the risk of injury, NEVER operate

the appliance without the splash guard in

place; DO NOT try to defeat the interlock

mechanism; make sure that the blades are

properly assembled before operating the

appliance.

18 DO NOT expose jars to extreme

temperaturechanges.

19 DO NOT use jars if they are cracked or

chipped.

20 DO NOT use the appliance if blades are

bent or damaged.

21 DO NOT operate the appliance for more than

15 seconds.

22 Avoid contact with moving parts at all

times. Keep hands, hair, clothing as well as

spatulas and other utensils away from pitcher

or chopping container during operation to

prevent risk of personal injury and/or damage

to the appliance. A scraper may be used only

when the appliance is not running.

23 DO NOT overﬁll.

24 DO NOT operate the appliance empty.

25 If the appliance overheats, a thermal

switch will become activated and shut off

the motor. To reset, unplug the appliance

and let it cool down for approximately 10

minutes before using again.

26 THIS PRODUCT IS INTENDED FOR

HOUSEHOLD USE ONLY. Do not use

this appliance for anything other than its

intended use. Do not use outdoors.

SAVE THESE

INSTRUCTIONS

41-877-646-5288

THIS BOOK COVERS MODEL NUMBERS:

QB1004Q

TECHNICAL SPECIFICATIONS

Voltage: 120V., 60Hz.

Power: 450 Watts

Pitcher Capacity: 1.42 L (48 ounces, 6 cups)

1.18 L (40 ounces, 5 cups)

Bowl Capacity: 470 ml (16 ounces, 2 cups)

www.ninjakitchen.com 5

Contents

Thank you for

purchasing

the Ninja®

Master Prep®

Professional.

Getting Started ......................................................................................................6

Using the Ninja Master Prep Professional Pitchers....................................................8

Using the Ninja Master Prep Professional Bowl ......................................................10

Cleaning and Maintenance ...................................................................................12

Troubleshooting Guide..........................................................................................12

Warranty .............................................................................................................15

61-877-646-5288

Getting Started

NOTE: Attachments are not interchangeable.

hMaster Prep Professional Bowl with Non-Slip Base

iBowl Splash Guard

j Upper Chopping Blade Assembly (bowl)

kLower Chopping Blade Assembly (bowl)

lBowl Storage Lid

mPower Cord (not shown)

a Power Head

bMaster Prep

Professional 40 oz. Pitcher with Non-Slip Base

cNinja®4-Blade Assembly

dMaster Prep

Professional 48 oz. Pitcher with Non-Slip Base

ePitcher Splash Guard

fNinja®6-Blade Assembly

gPitcher Storage Lid

www.ninjakitchen.com 7

The Ninja®Master Prep®Professional is an indispensable kitchen tool that is perfect for blending, chopping, mixing or

pureeing when preparing your favorite recipes.For best results, be sure to carefully read all the instructions contained in

the manual before using this appliance.

450 Watt Power Head

The 450 watt Power Head operates on 120V., 60Hz. electrical power. NEVER allow the Power Head to become wet when

plugged into an electrical outlet.

WARNING: The Power Head should never be immersed in water or any other liquid.

CAUTION: Make sure that the Power Head is unplugged from the electrical outlet and that the Blade

Assembly has stopped turning before attaching or removing any accessory.

CAUTION: Blade Assemblies are sharp! Use extreme caution when handling the Blade Assemblies.

Always hold them by the shaft. Do not attempt to sharpen blades.

IMPORTANT: Never run the appliance empty.

81-877-646-5288

Using the Ninja®Master Prep®Professional Pitchers

WARNING: DO NOT try to place the Blade

Assembly onto the Power Head and then into the

Master Prep Professional pitcher.

1 Place the Master Prep Professional pitcher on a clean,

dry, levelsurface.

2Holding the blade assembly by the shaft, place it onto

the spindle pin inside the Master Prep Professional

Pitcher.

• Use the Ninja 6-Blade Assembly in the 48 oz. Pitcher.

(ﬁg. 1)

• Use the Ninja 4-Blade Assembly in the 40 oz. Pitcher.

(ﬁg. 2)

IMPORTANT: Place blade assembly inside the

container carefully as blades are sharp.

3Add the ingredients to be processed into the Ninja

Master Prep Professional pitcher.

4Place the pitcher splash guard onto the top of the Ninja

Master Prep Professional pitcher. (ﬁg. 3)

IMPORTANT: Never add ingredients into the Ninja

Master Prep Professional pitcher before placing

the blade assembly in ﬁrst.

WARNING: Never leave the appliance unattended while in use.

WARNING: Remove utensils prior to processing.

CAUTION: Handle the Blade Assemblies with care, as the blades are very sharp.

CAUTION: Do not blend hot liquids.

IMPORTANT: Make sure that the Power Head is plugged in for use.

IMPORTANT: Never run the appliance empty.

Fig. 1 Fig. 2

Fig. 3

Shaft

www.ninjakitchen.com 9

5Place the power head on top of the pitcher splash

guard making sure that it is securely in place. (ﬁg. 3)

DO NOT attempt to operate the appliance without the

safety splash guard in place.

6 To start the appliance, plug the power cord into the

electrical outlet, securely hold power head while

operating and press on the on/off pulse button located

on the top of the power head. (ﬁg. 4)

7Hold the Ninja®Master Prep®Professional pitcher

ﬁrmly while depressing the on/off pulse button to

ensure the unit stays in place.

NOTE: DO NOT operate the appliance continuously for

more than 15 seconds at a time.

8To stop the appliance, remove your ﬁngers from the on/

off pulse button.

9In order to obtain a better quality of chopping, operate

the appliance by using the “pulse” method.

10 Make sure that the Blade Assembly has stopped

completely before removing the power head.

11 If the ingredients stick to the side of the Master Prep

Professional pitcher, stop the appliance, remove the

power head and the splash guard. Use a spatula to

dislodge the pieces and then replace the splash guard

and the power head. Continue processing.

12 Depending on the consistency of the contents, use the

pouring spout to empty liquid contents.

13 For thicker consistencies, ﬁrst remove splash guard and

Blade Assembly (by its shaft), then empty contents of

the Ninja Master Prep Professional pitcher.

HINTS & TIPS FOR USING YOUR NINJA

MASTER PREP PROFESSIONAL

• To crush ice into snow, start by using short pulses to

break up large chunks. Continue until snow is achieved.

Fig. 4 Fig. 5

CAUTION: Blade Assemblies are removable and not locked

in place. If using pour spout, make sure the splash guard is

secure on the jar by ﬁrmly pressing on the splash guard.

CAUTION

Blade Assemblies are

removable and not locked

in place. If pouring with the splash guard removed, always

remove the Blade Assembly ﬁrst.

10 1-877-646-5288

WARNING: DO NOT try to place the Chopping

Blade Assembly onto the Power Head and then

into the Master Prep Professional Bowl.

Using the Ninja®Master Prep®Professional Bowl

1 Place the Master Prep Professional Bowl on a clean,

dry, level surface.

2 Holding the Lower Chopping Blade Assembly by the

shaft, place it over the spindle pin inside the Master

Prep Professional Bowl. (ﬁg. 1)

3 Carefully insert the Upper Chopping Blade Assembly

over the Lower Chopping Blade Assembly rotating it

until it locks onto the Lower Chopping Blade Assembly.

(ﬁg. 2)

IMPORTANT: Always assemble the Chopping

Blade Assembly inside the container.

Shaft

Fig. 1 Fig. 2

WARNING: Never leave the appliance unattended while in use.

WARNING: Remove utensils prior to processing.

WARNING: DO NOT crush ice in Master Prep Professional Bowl or damage may occur to the unit.

CAUTION: Handle the Chopping Blade Assembly with care, as the blades are very sharp.

CAUTION: Blade assembly is loose and not locked in place. Make sure to remove the Chopping Blade

Assembly before emptying contents of processor bowl.

CAUTION: Do not blend hot liquids.

IMPORTANT: Make sure that the Power Head is plugged in for use.

IMPORTANT: Never run the appliance empty.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Shark Küchenmaschine Handbücher

Shark

Shark NINJA FP601CO Series Bedienungsanleitung

Beliebte Küchenmaschine Handbücher anderer Marken

INNOLIVING

INNOLIVING INN-727 Bedienungsanleitung

Berkel

Berkel C32 Bedienungsanleitung

Beko

Beko CHP5554W Bedienungsanleitung

KitchenAid

KitchenAid 5KFP0719 Bedienungsanleitung

QUIGG

QUIGG KM 2017Wi.20 Bedienungsanleitung

Lakeland

Lakeland PRESS AND CHOP 31557 Bedienungsanleitung

Bosch

Bosch MMR08 GB Series Bedienungsanleitung

HOFFEN

HOFFEN Chef Express T9532 Bedienungsanleitung

Garland

Garland 852 ZG Bedienungsanleitung

Robot Coupe

Robot Coupe CL50 Gourmet Bedienungsanleitung

SAPIRHOME

SAPIRHOME SP-1111-K Bedienungsanleitung

Moulinex

Moulinex DJ3051 Bedienungsanleitung

Bosch

Bosch MUM5 Bedienungsanleitung

cecotec

cecotec Mambo Touch Bedienungsanleitung

KitchenAid

KitchenAid 9KFC0516 Bedienungsanleitung

Black & Decker

Black & Decker hc 300 Montageanleitung

Gorenje

Gorenje SBR 1000 DV Bedienungsanleitung

Arzum

Arzum AR 1128 Bedienungsanleitung