Sharp AR-M237 IMAGERs Bedienungsanleitung

AR-M236

AR-M237

AR-M276

AR-M277

MODEL

DIGITAL MULTIFUNCTIONAL

SYSTEM

SOFTWARE SETUP GUIDE

Page

• INTRODUCTION

• SOFTWARE FOR THE SHARP

AR-M230/M270 SERIES

• BEFORE INSTALLATION

• INSTALLING THE SOFTWARE

• CONNECTING TO A COMPUTER

• CONFIGURING THE PRINTER

DRIVER

•

CONFIGURING THE PC-FAX

DRIVER WHEN USING A USB CABLE

(if the PC-FAX driver is installed)

• HOW TO USE THE ONLINE

MANUAL

• TROUBLESHOOTING

Back cover

!!install_ar230270.book 1 ページ２００３年７月１０日　木曜日　午後１１時１５分

INTRODUCTION

This manual explains how to install and configure the software that is required for the printer function

of the machine. The procedure for viewing the online manual is also explained.

Trademark acknowledgments

•Microsoft

®Windows®operating system is a trademark or copyright of Microsoft Corporation in the

U.S.A. and other countries.

• Windows®95, Windows®98, Windows®Me, Windows NT®4.0, Windows®2000, and Windows®

XP are trademarks or copyrights of Microsoft Corporation in the U.S.A. and other countries.

the Adobe logo, Acrobat, and the Acrobat logo are trademarks of Adobe Systems Incorporated.

• IBM and PC/AT are trademarks of International Business Machines Corporation.

• All other trademarks and copyrights are the property of their respective owners.

SOFTWARE LICENSE

The SOFTWARE LICENSE will appear when you install the software from the CD-ROM. By using all

or any portion of the software on the CD-ROM or in the machine, you are agreeing to be bound by the

terms of the SOFTWARE LICENSE.

• The screen images in this manual are mainly for Windows®XP. With other versions of

Windows®, some screen images may be different from those in this manual.

• The explanations in this manual are based on the North American version of the software.

Versions for other countries and regions may vary slightly from the North American version.

• Where "AR-XXXX" appears in this manual, please substitute the name of your model for "XXXX".

For the name of your model, see "PART NAMES AND FUNCTIONS" in the operation manual for

copier.

• This manual refers to the "SHARP Digital Multifunctional System AR-M230/M270 Series

Software CD-ROM" simply as "CD-ROM".

Note

!!install_ar230270.book 2 ページ２００３年７月１０日　木曜日　午後１１時１５分

CONTENTS

SOFTWARE FOR THE SHARP AR-M230/M270 SERIES.................................................... 2

BEFORE INSTALLATION ..................................................................................................... 2

●HARDWARE AND SOFTWARE REQUIREMENTS ................................................................... 2

●INSTALLATION ENVIRONMENT AND INSTALLATION PROCEDURE.................................... 2

INSTALLING THE SOFTWARE ............................................................................................ 3

●INSTALLATION IN WINDOWS XP (USB/PARALLEL CABLE) .................................................. 3

●INSTALLATION IN WINDOWS 98/ME/2000 (USB CABLE)....................................................... 6

●INSTALLATION IN WINDOWS 95/98/ME/NT4.0/2000 (PARALLEL CABLE) ............................ 8

CONNECTING TO A COMPUTER ...................................................................................... 10

●CONNECTING A USB CABLE ................................................................................................. 10

●CONNECTING A PARALLEL CABLE ...................................................................................... 10

CONFIGURING THE PRINTER DRIVER ............................................................................ 11

CONFIGURING THE PC-FAX DRIVER WHEN USING A USB CABLE (if the PC-FAX driver is installed)

...... 12

HOW TO USE THE ONLINE MANUAL............................................................................... 13

TROUBLESHOOTING......................................................................................................... 14

!!install_ar230270.book 1 ページ２００３年７月１０日　木曜日　午後１１時１５分

SOFTWARE FOR THE SHARP

AR-M230/M270 SERIES

The CD-ROM that accompanies the machine contains the following software:

•Printer driver

The printer driver enables you to use the printer function of the machine.

•PC-FAX driver

The PC-FAX driver lets you easily send faxes from your computer through the machine to another

fax machine (when the facsimile expansion kit is installed).

* To use the PC-FAX driver, Internet Explorer 4.0 or later must be installed in your computer.

•Acrobat Reader 5.0

Software that allows you to view the online printer manual on your computer.

BEFORE INSTALLATION

HARDWARE AND SOFTWARE REQUIREMENTS

Check the following hardware and software requirements before installing the software.

*1 Compatible with Windows 98, Windows Me, Windows 2000 Professional, Windows XP Professional or

Windows XP Home Edition preinstalled models equipped with a USB interface as standard.

*2 If you are installing the PC-FAX driver, a system file must be updated before the driver can be installed. For

more information, click the "Display README" button in the select packages window of the installer. (p. 8)

*3 Administrator's rights are required to install the software using the installer.

INSTALLATION ENVIRONMENT AND INSTALLATION

PROCEDURE

Follow the appropriate installation procedure for your operating system and type of cable as indicated below.

Computer type IBM PC/AT or compatible computer equipped with a USB 2.0/1.1*1or

bi-directional parallel interface (IEEE 1284)

Operating system Windows 95*2, Windows 98, Windows Me,

Windows NT Workstation 4.0 (Service Pack 5 or later)*3,

Windows 2000 Professional*3, Windows XP Professional*3,

Windows XP Home Edition*3

Other hardware requirements An environment that allows any of the above operating systems to fully operate

Operating system Cable Procedure to follow

Windows XP USB/Parallel INSTALLATION IN WINDOWS XP (USB/PARALLEL CABLE) (p. 3)

Windows 98/Me/2000 USB INSTALLATION IN WINDOWS 98/ME/2000 (USB CABLE) (p. 6)

Windows 98/Me/2000 Parallel INSTALLATION IN WINDOWS 95/98/ME/NT4.0/2000 (PARALLEL

CABLE) (p. 8)

Windows 95/NT 4.0 Parallel INSTALLATION IN WINDOWS 95/98/ME/NT4.0/2000 (PARALLEL

CABLE) (p. 8)

!!install_ar230270.book 2 ページ２００３年７月１０日　木曜日　午後１１時１５分

INSTALLING THE SOFTWARE

INSTALLATION IN WINDOWS XP (USB/PARALLEL

CABLE)

1The USB or parallel cable must not be

connected to the machine. Make sure

that the cable is not connected before

proceeding.

If the cable is connected, a Plug and Play

window will appear. If this happens, click the

"Cancel" button to close the window and

disconnect the cable.

Insert the CD-ROM into your computer's

CD-ROM drive.

3Click the "start" button, click "My

Computer" ( ), and then double-click

the CD-ROM icon ( ).

4Double-click the "setup" icon ( ).

5The License Agreement window will

appear. Make sure that you understand

the contents of the license agreement,

and then click the "Yes" button.

Read the message in the "Welcome"

window and then click the "Next" button.

7Select the checkboxes of the software

packages to be installed and then click

the "Next" button.

Click the "Display README" button to show

information on packages that are selected.

8Check the packages on the screen, and

then click the "Start" button.

The software packages to be installed will

be displayed on the screen. If an incorrect

package is displayed, click the "Back"

button and select the correct packages.

If an error message appears, follow the on-screen instructions to solve the problem. After the

problem is solved, the installation procedure will continue. Depending on the problem, you may

have to click the "Cancel" button to exit the installer. In this case, reinstall the software from the

beginning after solving the problem.

Note

The cable will be connected in step

12.

If the language selection screen

appears after you double click the

"setup" icon, select the language that

you wish to use and click the "Next"

button. (Normally the correct language

is selected automatically.)

Note

The PC-FAX driver can only be used if

the facsimile expansion kit is installed.

Note

!!install_ar230270.book 3 ページ２００３年７月１０日　木曜日　午後１１時１５分

INSTALLING THE SOFTWARE

9The files required for installation of the

printer driver are copied (if "Printer

Driver" was selected in Step 7).

Follow the on-screen instructions.

When you are asked how the printer is

connected, select "Connected to this

computer" and click the "Next" button.

When "The installation of the SHARP

software is complete" appears, click the

"OK" button.

Begin the installation of the PC-FAX

driver (if "PC-FAX Driver" was selected

in Step 7).

Follow the on-screen instructions.

•

When the model selection window appears,

select model name of your machine.

•

During installation of the PC-FAX driver, you

will be asked to select the port. If you are

using the USB port, select any port (such as

LPT1) and continue the installation. The port

settings are configured in the PC-FAX driver

properties after installation. (p. 12)

Click the "Finish" button when the message

informs you that setup is successful.

When the "Finish" screen appears,

click the "Close" button.

When "After Windows system restarts,

connect the interface cable to the PC"

appears, click the "OK" button.

Connect the interface cable to the

machine and your computer (p. 10).

•If you are using a USB cable, make

sure the machine's power is turned on

and then connect the cable.

•If you are using a parallel cable, turn

off the power of the machine and your

computer, connect the cable, turn on the

power of the machine, and then turn on

your computer.

Windows will detect the machine and the

Plug and Play screen will appear.

If the following screen appears while the

files are being copied (the message may

appear more than once), click the

"Continue Anyway" button.

Caution

After the installation, a message

prompting you to restart your computer

may appear. In this case, click the

"Yes" button to restart your computer.

Note

!!install_ar230270.book 4 ページ２００３年７月１０日　木曜日　午後１１時１５分

INSTALLING THE SOFTWARE

Begin installation of the printer driver.

"SHARP AR-XXXX" will appear in the

"Found New Hardware Wizard" dialog box.

Select "Install the software automatically

(Recommended)" and click the "Next"

button. Follow the on-screen instructions.

This completes the installation of the

software.

• If you installed the printer driver, configure

the printer driver settings as explained in

"CONFIGURING THE PRINTER DRIVER"

(p. 11).

• If you installed the PC-FAX driver and are

using a USB connection, configure the

PC-FAX driver settings as explained in

"CONFIGURING THE PC-FAX DRIVER

WHEN USING A USB CABLE (if the PC-FAX

driver is installed)" (p. 12).

If a warning window appears

regarding the "Windows logo test", be

sure to click the "Continue Anyway"

button.

Caution

!!install_ar230270.book 5 ページ２００３年７月１０日　木曜日　午後１１時１５分

INSTALLING THE SOFTWARE

INSTALLATION IN WINDOWS 98/ME/2000 (USB CABLE)

1The USB cable must not be connected

to the machine. Make sure that the

cable is not connected before

proceeding.

If the cable is connected, a Plug and Play

window will appear. If this happens, click the

"Cancel" button to close the window and

disconnect the cable.

Insert the CD-ROM into your computer's

CD-ROM drive.

3Double-click "My Computer" ( ), and

then double-click the CD-ROM icon

().

4Double-click the "setup" icon ( ).

5The License Agreement window will

appear. Make sure that you understand

the contents of the license agreement,

and then click the "Yes" button.

Read the message in the "Welcome"

window and then click the "Next" button.

7Select the checkboxes of the software

packages to be installed and then click

the "Next" button.

Click the "Display README" button to show

information on packages that are selected.

8Check the packages on the screen, and

then click the "Start" button.

The software packages to be installed will

be displayed on the screen. If an incorrect

package is displayed, click the "Back"

button and select the correct packages.

9The files required for installation of the

printer driver are copied (if "Printer

Driver" was selected in Step 7).

Follow the on-screen instructions.

When you are asked how the printer is

connected, select "Connected to this

computer" and click the "Next" button.

The cable will be connected in step 12.

If the language selection screen appears

after you double click the "setup" icon,

select the language that you wish to use

and click the "Next" button. (Normally the

correct language is selected automatically.)

Note

The PC-FAX driver can only be used if

the facsimile expansion kit is installed.

Note

!!install_ar230270.book 6 ページ２００３年７月１０日　木曜日　午後１１時１５分

INSTALLING THE SOFTWARE

When the interface selection screen

appears, select "USB" and click the

"Next" button.

When "The installation of the SHARP

software is complete" appears, click the

"OK" button.

Begin the installation of the PC-FAX

driver (if "PC-FAX Driver" was selected

in Step 7).

Follow the on-screen instructions.

• When the model selection window

appears, select model name of your

machine.

• During installation of the PC-FAX driver,

you will be asked to select the port. If

you are using the USB port, select any

port (such as LPT1) and continue the

installation. The port settings are

configured in the PC-FAX driver

properties after installation. (p. 12)

Click the "Finish" button when the

message informs you that setup is

successful.

When the "Finish" screen appears,

click the "Close" button.

When "After Windows system restarts,

connect the interface cable to the PC"

appears, click the "OK" button.

Make sure that the power of the

machine is turned on, and then

connect the USB cable. (p. 10)

Windows will detect the machine and the

Plug and Play screen will appear.

Follow the instructions in the Plug and

Play screen that appears in your

version of Windows to begin the

installation.

This completes the installation of the

software.

• If you installed the printer driver, configure

the printer driver settings as explained in

"CONFIGURING THE PRINTER DRIVER"

(p. 11).

• If you installed the PC-FAX driver, configure

the PC-FAX driver settings as explained in

"CONFIGURING THE PC-FAX DRIVER

WHEN USING A USB CABLE (if the PC-FAX

driver is installed)" (p. 12).

In Windows 2000, if the following

screen appears while the files are

being copied (the message may

appear more than once), click the

"Yes" button.

Caution

After the installation, a message

prompting you to restart your

computer may appear. In this case,

click the "Yes" button to restart your

computer.

Note

!!install_ar230270.book 7 ページ２００３年７月１０日　木曜日　午後１１時１５分

INSTALLING THE SOFTWARE

INSTALLATION IN WINDOWS 95/98/ME/NT4.0/2000

(PARALLEL CABLE)

1The USB or parallel cable must not be

connected to the machine. Make sure

that the cable is not connected before

proceeding.

If the cable is connected, a Plug and Play

window will appear. If this happens, click the

"Cancel" button to close the window and

disconnect the cable.

Insert the CD-ROM into your computer's

CD-ROM drive.

3Double-click "My Computer" ( ), and

then double-click the CD-ROM icon

().

4Double-click the "setup" icon ( ).

5The License Agreement window will

appear. Make sure that you understand

the contents of the license agreement,

and then click the "Yes" button.

Read the message in the "Welcome"

window and then click the "Next" button.

7Select the checkboxes of the software

packages to be installed and then click

the "Next" button.

Click the "Display README" button to show

information on packages that are selected.

8Check the packages on the screen, and

then click the "Start" button.

The software packages to be installed will

be displayed on the screen. If an incorrect

package is displayed, click the "Back"

button and select the correct packages.

Begin installation of the printer driver (if

"Printer Driver" was selected in Step 7).

Follow the on-screen instructions.

If you are using Windows 95/NT 4.0, go to

step 12.

When you are asked how the printer is

connected, select "Connected to this

computer" and click the "Next" button.

The cable will be connected in step 18.

If the language selection screen appears

after you double click the "setup" icon,

select the language that you wish to use

and click the "Next" button. (Normally the

correct language is selected automatically.)

Note

•

The PC-FAX driver can only be used if

the facsimile expansion kit is installed.

• If you are installing the PC-FAX

driver, a system file must be

updated before the driver can be

installed. For more information, click

the "Display README" button.

Note

!!install_ar230270.book 8 ページ２００３年７月１０日　木曜日　午後１１時１５分

Andere Handbücher für AR-M237 IMAGERs

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sharp Multifunktionsdrucker Handbücher

Sharp

Sharp AR-122E N Bedienungsanleitung

Sharp

Sharp BP-30C25 Gebrauchsanweisung

Sharp

Sharp AR-203E X Bedienungsanleitung

Sharp

Sharp AL-2051 Bedienungsanleitung

Sharp

Sharp AL-1551 Bedienungsanleitung

Sharp

Sharp FO-DC550 Bedienungsanleitung

Sharp

Sharp MX-7580N Betriebsanleitung

Sharp

Sharp MX-2010U Bedienungsanleitung

Sharp

Sharp AL-2051 Bedienungsanleitung

Sharp

Sharp MX-5141N Installationsanleitung

Sharp

Sharp MX-4140N Bedienungsanleitung

Sharp

Sharp CPD-3830 Bedienungsanleitung

Sharp

Sharp MX-3111U Bedienungsanleitung

Sharp

Sharp SF-2040 Bedienungsanleitung

Sharp

Sharp MX-B200 Leitfaden

Sharp

Sharp MX-3114N Operation Bedienungsanleitung

Sharp

Sharp AR-M350 Imager Bedienungsanleitung

Sharp

Sharp AL-1035-WH A Bedienungsanleitung

Sharp

Sharp DX-C200 Bedienungsanleitung

Sharp

Sharp AR-5618 Bedienungsanleitung

Sharp

Sharp MX-4141N Bedienungsanleitung

Sharp

Sharp AR M550N - B/W Laser - Copier Bedienungsanleitung

Sharp

Sharp DM-2000 Bedienungsanleitung

Sharp

Sharp AL-841 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung