Sharp 54GT-25S Bedienungsanleitung



DANSK



ENGLISH



NORSK



SUOMI



SVENSKA

54GT-25S



ENGLISH

INSTALLATION

BASIC OPERATION

 Connect the antenna cable to the TV set.

Plug in your TV into the mains supply

(220~240 V/ 50 Hz).

Insert two (AA or UM-3, 1,5 V) batteries into

the remote control.

Position the positive and negative ends of the

batteries as indicated.

Press the POWER (®) button on the TV set

to turn on TV. If the TV set remains in the

Stand-by mode, press the Stand-by on (æ)

button on the remote control.

STANDBY/ON (æ)

Press To turn the set ON

Press again To turn the set to

STANDBY

TV/VIDEO Select

Press Switch to external video

input mode

Press again Switch to TV

mode.

Infrared Transmitter Window

Aim this window at the

infrared sensor on your

TV set

FLASHBACK (e)

Returns to previously viewed channel

VOLUME UP (œ)/DOWN (∑)

(œ) Increases sound

(∑) Decreases sound

(These are also used for menu

set up)

SOUND MUTE (c)

Press Mutes sound

Press again Restores sound to

previous level

Channel Select buttons

TELETEXT control

These buttons are used to operate

TELETEXT functions.

(See page 10, 11 and 12)

TIME (f)

Press the button to display the

current time on the screen. This

function only operates if the sta-

tion you are tuned to broadcasts

a teletext signal.

CHANNEL UP (œ)/DOWN (∑)

(œ) Selects next higher channel

(∑) Selects next lower channel

(These are also used for menu

set up)

TEXT/MIX/PICTURE

Single/Double (6) Entry selector

Used to call the MENU screen.

CALL (l)/CHILD LOCK (t)

Used to display the different current

settings on the screen.

Used to unlock the channel when the

TV picture is blue and “t“ mark

displays on the screen.







AC 220~240 V

50Hz

BASIC OPERATION (CONTINUED)

NOTE: If noise appears in TV or VCR mode, the screen turns blue. The blue back off-timer is then

engaged and will automatically switch the set to Stand-by mode after 15 minutes.

POWER (l) button

POWER indicator

CHANNEL UP (œ) or DOWN

(∑) button

VOLUME UP (œ) or DOWN (∑) button

TV Front

Remote control sensor

❚ Changing the Channels

To select a one-digit channel (eg. Program 5)

(1) Press the



button.

(2) If 5- is indicated and picture does not change, press the 6

button to switch over to the 1 - digit select mode and press 5

again.

To select a two-digit channel (eg. Program 15)

(1) Press 6button to set the 2-digit select mode.

(2) Press



button

(3) Press



button.

❚ Adjusting the Sound Volume

Press VOLUME UP (œ)/DOWN (∑) button to adjust the volume.

❚ Watching a TV Programme





PR 5

PR - -

PR 1 -

PR 15

PR 5

llllllllll



ENGLISH

Please refer to the operation manual of your VCR for details.

Enjoy the stunning visuals of a VCR or DECODER by connecting them to this TV set through

its Euro-SCART 21-pin terminal.

TYPICAL CONNECTIONS

PRESETTING THE CHANNELS

❚ Manual Channel Preset

1Press MENU to call the MAIN menu screen.

2Press CHANNEL UP (œ) or DOWN (∑) to select

«<PR>», and press the MENU.

3Press CHANNEL UP (œ) or DOWN (∑) to select

«MANUAL», and press the MENU.

4Press CHANNEL UP (œ) or DOWN (∑) to select «PR»,

and select the channel number (1-99) with VOLUME UP

(œ) or DOWN (∑) or 0-9 digit buttons.

5Press CHANNEL UP (œ) or DOWN (∑) to select

«BAND» and press MENU to change the position

«BAND».

(VHL VHH UHF)



RF-Cable

Scart-Cable

OUT

VCR

Antenna

All the TV stations in your area that can be received by the TV set are

automatically preset between channels 1 to 99.The screen shows whatever is

on channel 1 when full auto channel preset is finished.

❚ Auto Channel Preset

1Press MENU to call the MAIN menu screen.

2Press CHANNEL UP (œ) or DOWN (∑) to select «<PR>»,

and press MENU.

3Press VOLUME UP (œ) or DOWN (∑) on the remote

control to start Auto Channel Preset.

NOTE: To stop Auto Channel Preset, press the MENU button on the remote control.

❚FineTuning

1Press MENU to call the MAIN menu screen.

2Press CHANNEL UP (œ) or DOWN (∑) to select

«<PR>», and press the MENU.



6Press CHANNEL UP (œ) or DOWN (∑) to select

«MANUAL» position ( llllllIIllll ).

7Press VOLUME UP (œ) or DOWN (∑) to start preset.

The tuning sequence will stop when a signal is detected,

if the signal is not the required channel press again the

button to continue

8Press CHANNEL UP (œ) or DOWN (∑) to select

«MEMO», and press MENU to memorize.

9Repeat steps 4 to 8 if you wish to preset other channels.

10 Press CHANNEL UP (œ) or DOWN (∑) to select

«EXIT», and press MENU to return to normal screen.



ENGLISH

Repeat steps 1 to 4 above from page 5. (Fine Tuning)

5Press CHANNEL UP (œ) or DOWN (∑) to select «PR»

6Select a channel number you wish to cancel skip with the VOLUME UP (œ) or DOWN (∑).

Select a skipped channel number displayed in red.

7Press CHANNEL UP (œ) or DOWN (∑) to select «SKIP», and press MENU.

The displayed channels number will turn from red to green.

8Press CHANNEL UP (œ) or DOWN (∑) to select «EXIT», and press MENU.

Cancelling Skip

5Press CHANNEL UP (œ) or DOWN (∑) to select

«<PR>»

6Select a channel number you wish to skip with the

VOLUME UP (œ) or DOWN (∑).

7Press CHANNEL UP (œ) or DOWN (∑) to select

«SKIP» mode, and press MENU.

The channel number will turn from green to red.

8Repeat steps 5 to 7 if you wish to skip other channels.

9Press CHANNEL UP (œ) or DOWN (∑) to select «EXIT», and press MENU.



❚Skipping channels

This function lets you skip vacant channels or channels that you never watch

when you select channels with the CHANNEL UP or DOWN buttons.

Setting Skip

Repeat steps 1 to 4 above from page 5 (Fine Tuning).



3Press CHANNEL UP (œ) or DOWN (∑) to select

«MANUAL», and press MENU.

4Press CHANNEL UP (œ) or DOWN (∑) to select «FINE»

and press the MENU.

5Press and hold VOLUME UP (œ) or DOWN (∑) until the

best tuning position is found. After Fine Tuning the channel

number will turn from green to yellow.

6Press the CHANNEL UP (œ) or DOWN (∑) to select

«EXIT», and press MENU.

The screen will turn to normal screen.

TIMER SETTING

❚ON Timer

Automatically turns power ON after the set length of time has passed.

1Press MENU to call the MAIN menu screen.

2Press CHANNEL UP (œ) or DOWN (∑) to select

«TIMER», and press MENU.

3Press CHANNEL UP (œ) or DOWN (∑) to select «

ON» mode.



1Press MENU to call the MAIN menu screen, press

CHANNEL UP (œ) or DOWN (∑) to select

«PICTURE», and press MENU.

2Press CHANNEL UP (œ) or DOWN (∑) to select

the items to adjust.

3Adjust the picture quality to your liking with the

VOLUME UP (œ) or DOWN (∑).

4Repeat steps 2 and 3 above to adjust other items.

5You can clear the on-screen display by selecting

«EXIT» using CHANNEL UP (œ) or DOWN (∑),

and press MENU.

Selected item

BCONTRAST SHARPNESS

CCOLOUR N NORMAL

ABRIGHTNESS

PICTURE ADJUSTMENT

❚Adjusting the Picture

Picture quality (CONTRAST, COLOUR, BRIGHTNESS, SHARPNESS) are adjustable in this

menu.



NOTE: Selecting «N OFF» you can reset the picture parameters

to the factory levels.

Press MENU to restore the factory setting «N ON» mode.



ENGLISH

❚OFF Timer

Automatically turns power OFF after the set length of time has passed.

Repeat steps 1 to 2 above from page 7. (ON TIMER)

3Press CHANNEL UP (œ) or DOWN (∑) to select «

OFF» mode.

4Press VOLUME UP (œ) or DOWN (∑) to set the time.

(from 10 min. to 12 hour 50 min. at 10 min. interval).

The timer starts count down.

5When you have finished setting the time, press

MENU.

NOTE:

• In order to know when the ON Timer programme has been run properly, when the TV is in the

Standby mode, the ON Timer indicator remains flashing in red.

• As a safety precaution, in case nobody is at home when the television switches on automatically,

the television will turn itself of automatically after 120 minutes; if it is to continue to run, any button

of the remote control functions should be pressed.

• In the event of a power cut, disconnection from the plug or the television is switched off at the

mains switch, all the data on the ON Timer will be cancelled.

5Press STANDBY/ON (æ) to put the TV set into Standby mode. Power indicator flashes.

When the preset of time (in the above example, 8 hour and 30 minutes) has passed, the

power turns ON and a picture appears on the screen.

4Press VOLUME UP (œ) or DOWN (∑) to set the time.

(from 10 min. to 12 hour 50 min. every 10 min. interval).

NOTE: In the event of a power cut, disconnection from the plug or the television is switched off

at the mains switch, all the data on the OFF Timer will be cancelled.

HINWEIS:

• When you select the channel which you locked, the TV picture will be blue

and «t» mark dislays on the screen.

• Press (l/t) button to unlock the channel.

• Because the remote control is the «key» to unlocking TV channel you must

remember not to let the remote control out of your sight.

3To select the channel you want to lock with

VOLUME UP (œ) or DOWN (∑)

(you can also select the channel using 0-9 digit

button).

4Press CHANNEL UP (œ) or DOWN (∑) to select

«t» and press MENU.

(«t» mark will display on top right)

5Press CHANNEL UP (œ) or DOWN (∑) to select

«EXIT», and press MENU. 



1Press MENU to call the MAIN menu screen.

2Press CHANNEL UP (œ) or DOWN (∑) to select

«t» menu and press MENU. 



CHILD LOCK (CHANNEL BLOCK)

<How to use this system>, You can lock a TV channel to prevent unsupervised TV viewing by

following these procedures:

NOTE: You can also protect the SCART connection.



ENGLISH

❚Cancelling Child Lock

1Press MENU to call the MAIN menu screen.

2Press CHANNEL UP (œ) or DOWN (∑) to select

«t» menu and press MENU.

3Press VOLUME UP (œ) or DOWN (∑) to select the

channel you wish to cancel

(you can also select the channel using 0-9 digit

buttons).



4Press CHANNEL UP (œ) or DOWN (∑) to select

«r» and press MENU.

(«t» mark will disappear in top right)

5Press CHANNEL UP (œ) or DOWN (∑) to select

«EXIT», and press MENU.



Andere Handbücher für 54GT-25S

Inhaltsverzeichnis

Andere Sharp Röhrenfernseher Handbücher

Sharp

Sharp MX-2610N Bedienungsanleitung

Sharp

Sharp 59CS-03IR Bedienungsanleitung

Sharp

Sharp DV-6345S Bedienungsanleitung

Sharp

Sharp 37AT-25H Bedienungsanleitung

Sharp

Sharp 14LM-40C Bedienungsanleitung

Sharp

Sharp 37DM-23H Bedienungsanleitung

Sharp

Sharp 70ES-03SN Bedienungsanleitung

Sharp

Sharp 56FW-53H Bedienungsanleitung

Sharp

Sharp CV-3720G Bedienungsanleitung

Sharp

Sharp 59ES-D7H Bedienungsanleitung

Sharp

Sharp CR25S10 Bedienungsanleitung

Sharp

Sharp 59ES-D7H Bedienungsanleitung

Sharp

Sharp 36UF5/6 Bedienungsanleitung

Sharp

Sharp 28HW-53H Bedienungsanleitung

Sharp

Sharp CR27FS1 Bedienungsanleitung

Sharp

Sharp 51AT-15H Bedienungsanleitung

Sharp

Sharp 56FW-53H Bedienungsanleitung

Sharp

Sharp DV-5432S Bedienungsanleitung

Sharp

Sharp 32UF5 Bedienungsanleitung

Sharp

Sharp 28JW-73H Bedienungsanleitung

Sharp

Sharp CT-2110S Bedienungsanleitung

Sharp

Sharp 14R2F Bedienungsanleitung

Sharp

Sharp 51DS-03H Bedienungsanleitung

Sharp

Sharp 32R-S50 Bedienungsanleitung

Beliebte Röhrenfernseher Handbücher anderer Marken

JVC

JVC AV-21QS5SP Bedienungsanleitung

Philips

Philips COLOR TV 25 INCH TABLE TR2517C Bedienungsanleitung

Hitachi

Hitachi 27CX01B Bedienungsanleitung

LG 30FZ1DC Bedienungsanleitung

Sony

Sony FD TRINITON WEGA KV-24FS120 Bedienungsanleitung

RCA

RCA F19442 Bedienungsanleitung

Samsung

Samsung CS761 Bedienungsanleitung

Philips

Philips 29PT4973 Bedienungsanleitung

Panasonic

Panasonic TC-29P100 Series Bedienungsanleitung

RCA

RCA F19422 Bedienungsanleitung

Sony

Sony WEGA KV 32HS20 Bedienungsanleitung

Samsung

Samsung SlimFit TX R3079WH Bedienungsanleitung

Palsonic

Palsonic MODEL 5179G Bedienungsanleitung

Toshiba

Toshiba CF13H22 Bedienungsanleitung

Magnavox

Magnavox MS3650C - 36" Smart Ctv Handbuch

Toshiba

Toshiba 14AF41 Bedienungsanleitung

Philips

Philips 21PT9469 Bedienungsanleitung

Mitsubishi

Mitsubishi CS-35305 Bedienungsanleitung