Sharp MX-M310 Einrichtungshandbuch

Online Manual (for network printer)

Start

Click this "Start" button.

MX-M260N/M260/M310N/M310

CONTENTS

Introduction

This manual describes the printer function of the digital multifunctional system.

●For information on loading paper, replacing toner cartridges, clearing paper misfeeds, handling peripheral devices, and other

copier-related information, please refer to your operation manual.

●The machine's default settings and default settings for the printer function can be changed using the system settings

(administrator). For more information, see the "SYSTEM SETTINGS (ADMINISTRATOR)" in the operation manual.

●Where "MX-xxxx" appears in this manual, please substitute the name of your model for "XXXX". For the name of your model, see

"PART NAMES AND FUNCTIONS" in the operation manual.

●This manual refers to the Reversing single pass feeder as the "RSPF".

●The explanations of screens and procedures in this manual are primarily for Windows Vista®in Windows® environments, and Mac

OS X v10.4 in Macintosh environments. The screens may vary in other versions of the operating systems.

●For information on using your operating system, refer to your operating system's manual or online Help.

●The PS3 expansion kit (MX-PK10) mentioned in this manual is an option.

The display screens, messages, and key names shown in the manual may differ from those on the actual machine due to product

improvements and modifications.

Note

CONTENTS

How to use the online manual

This section explains how to view the online manual. Please read this section before using the online manual.

For information on using Adobe Reader, see Adobe Reader Help.

How to Control the Online Manual

In this manual, the following buttons are displayed at the bottom

of each page. Click these buttons to move quickly to pages that

you wish to view.

Displays the Contents of this manual. Click on a topic in the

Contents to jump directly to that section.

Takes you forward page by page.

Takes you back page by page.

Following Links

This manual uses a link function that allows you to jump to a

related page. If you click green, underlined text, the related

page will be displayed. (In the Contents section, the linked

areas are not underlined.)

Example: ☞Contents

To return to the previous page, click the button on the menu

bar of Adobe Reader.

Using Bookmarks

Bookmarks have been created on the left side of this manual.

You can click on a bookmark to jump directly to that section.

How to Print Out This Manual

To print this manual, select "Print" from the "File" menu of

Adobe Reader. Select the desired printer settings in the "Print"

dialog box, and then click the "OK" button.

CONTENTS

Contents (part 1)

Introduction 2

How to use the online manual 3

Basic printing 7

●When "Paper Selection" is set to "Auto Select" 8

●

When the "Paper Selection" setting is "Paper Source" or "Paper Type"

●Auditing mode 10

●About the "No Offset" function setting 10

Opening the printer driver from the "start" button 11

Printer driver settings 12

Two-sided printing 13

●Pamphlet style 14

Printing multiple pages on one page 15

Fitting the printed image to the paper 16

Rotating the print image 180 degrees 17

Enlarging/reducing the print image 18

Adjusting the brightness and contrast of the image 19

Saving frequently used print settings 20

Printing a watermark 21

●How to Print a Watermark 21

Stapling printed pages (when a finisher is installed) 22

●When a finisher is installed 22

Print hold function 23

Printing using the print hold function 24

●

Selecting print hold settings in the printer driver at the time of printing

●How to print a print hold job 25

●Points to note about the Print Hold function 26

Carbon copy print 27

Printing using carbon copy print 28

Printing text and lines in black 29

●Printing text in black 29

●Printing lines in black 29

Printer utilities 30

●Before using the Printer Status Monitor 30

Using the printer utilities 31

●Starting up the printer utilities 31

●Using the printer utilities 31

●Changing the Printer Status Monitor settings 32

●Checking the printer status 33

1PRINTING FROM WINDOWS

2ADVANCED PRINTING (WINDOWS)

3PRINTER UTILITIES (WINDOWS)

CONTENTS

Contents (part 2)

Basic printing 34

●Selecting paper settings 34

●Printing 36

●When "Paper Feed" is set to "Auto Select" 38

●When "Paper Feed" is set to paper tray or paper type 39

Two-sided printing 40

●Pamphlet style 42

Printing multiple pages on one page 44

Fitting the printed image to the paper 47

Rotating the print image 180 degrees 48

Enlarging/reducing the print image 50

Printing a watermark 51

Stapling printed pages (when a finisher is installed) 53

●When a finisher is installed 53

Job Handling function (Mac OS 9.0 to 9.2.2 and Mac OS X v10.2 to 10.4)

●Printing when auditing mode is enabled 55

●Using the print hold function 55

Giving priority to a print job / Canceling a print job 56

●Giving priority to a print job 56

●Canceling a print job 57

Configuring the printer condition settings 58

●How to configure the settings 58

●Printer condition setting menu 60

●Printer condition settings 61

Printing the printer setting and font lists 66

Troubleshooting 67

Printing does not take place 68

●Check the connections 68

●Check Your Computer 69

●Check the machine 70

●Checking the printer driver 71

Improper printing operation 72

●Printing is slow 72

●Two-sided printing is not possible 72

●Stapling is not possible (when a finisher is installed) 72

Print quality is not satisfactory 74

●Check the paper being used 74

●The printed image is coarse 74

●The printed image is distorted 74

●Part of the printed image is missing 75

If a notice page is printed 76

●Disabling notice page printing 77

4PRINTING FROM MACINTOSH

5OPERATION AT THE MACHINE

6TROUBLESHOOTING

CONTENTS

Contents (part 3)

About the Web page 78

●Accessing the Web page 78

Directly printing a file in a computer 81

E-mail print function 82

●Setting up the E-mail print function 82

●Using the E-mail print function 83

E-mail status and e-mail alert settings 84

●Information setup 84

●SMTP setup 84

●Status message setup 85

●Alerts message setup 86

Protecting information programmed in the web page ("Passwords")

Printer specifications 88

Printer driver specifications 89

7WEB PAGE IN THE MACHINE

8SPECIFICATIONS

1PRINTING FROM WINDOWS

CONTENTS

Basic printing (part 1)

The following example explains how to print a document from WordPad.

Before printing, make sure that the correct size of paper for your document has been loaded in the machine.

1Make sure that the ON LINE indicator on the

operation panel is lit.

If the ON LINE indicator is not

on, press the [PRINT] key to

switch to printer mode and then

touch the [ONLINE] key.

The status of the printer function is indicated by the ON

LINE and DATA indicators next to the [PRINT] key.

2Start WordPad and open the document that you

wish to print.

3Select "Print" from the application's "File"

menu.

The "Print" dialog box will appear.

4Make sure that "SHARP MX-xxxx" is selected as

the printer. If you need to change any print

settings, click the "Preferences" button to open

the printer driver setup screen.

The printer driver setup screen will appear.

Windows 2000 does not have the "Preferences" button

in this dialog box. Select settings as needed on each of

the tabs in the setup screen.

ON LINE indicator DATA indicator

Lit The machine is online

and ready to print.

There is print data in

memory that has not

been printed yet.

Blinking —The machine is

printing.

Off The machine is offline

and not ready to print.

The machine is not

printing.

COPY

SCAN

FAX

ON LINE

DATA

LINE

DATA

1PRINTING FROM WINDOWS

CONTENTS

Basic printing (part 2)

5Click the "Print" button.

Printing begins.

When "Paper Selection" is set to "Auto Select"

If "Paper Selection" is set to "Auto Select" in the "Paper" tab of

the printer driver setup screen and the correct size of paper for

a print job is not loaded in the machine, the printing procedure

will vary depending on the "FORCED OUTPUT OF PRINT"

setting in the system settings (administrator) (see the

"SYSTEM SETTINGS (ADMINISTRATOR)" in the operation

manual).

When "FORCED OUTPUT OF PRINT" is disabled

If the bypass tray can be used, a message prompting you to

print from the bypass tray will appear in the touch panel.

Press the [PRINT] key on the operation panel, touch the

[BYPASS TRAY] key, load paper in the bypass tray, and then

touch the [BYPASS] key. Printing will begin automatically.

When "FORCED OUTPUT OF PRINT" is enabled

Printing will take place using a size of paper that is close to the

size of the print image.

●The output tray can be selected in the system settings

(administrator) (see "OUTPUT TRAYS" in the

"SYSTEM SETTINGS (ADMINISTRATOR)" in the

operation manual).

●The output tray can also be selected in the print

settings at the time of printing. To change the tray

selection, select the desired tray in "Output" in the

"Paper" tab of the printer driver setup screen.

●Printing can be canceled in the job status screen.

☞Canceling a print job

●If the paper type setting in the printer driver is different

from the bypass tray's paper type setting in the

machine, printing may stop. To resume printing, press

the [PRINT] key on the operation panel, touch the

[BYPASS TRAY] key in the touch panel, and specify

the same paper type as in the printer driver.

Note

If the paper is loaded in a different orientation than the

print image, the image is automatically rotated to match

the paper. This setting can be changed in the system

settings (administrator) (see "ROTATED PRINT" in the

"SYSTEM SETTINGS (ADMINISTRATOR)" in the

operation manual).

Note

1PRINTING FROM WINDOWS

CONTENTS

Basic printing (part 3)

When the "Paper Selection" setting is "Paper Source" or "Paper Type"

When "Paper Selection" in the "Paper" tab of the printer driver

setup screen is set to:

●Specify the tray to be used for printing in the "Paper Source"

pull-down menu.

●Specify the type of paper to be used for printing in the

"Paper Type" pull-down menu.

If you selected the "Paper Source" or "Paper Type" in the printer

driver setup screen but there is no paper in the trays that

matches your selection, printing will take place as follows:

You selected a tray in "Paper Source", but the size

of the paper in the selected tray does not match

the printing size.

Even though the paper size is different, printing will take place

using the paper in the selected tray.

You selected a "Paper Type", and although the

selected type of paper is loaded in the machine, its

size does not match the printing size.

Even though the paper size is different, printing will take place

using the selected paper type.

However, if "FORCED OUTPUT OF PRINT" is disabled,

printing will not take place.

You selected a "Paper Type", but the selected type

of paper is not loaded in the machine.

If the bypass tray can be used, a message prompting you to

print from the bypass tray will appear. Press the [PRINT] key on

the operation panel, touch the [BYPASS TRAY] key, load the

correct size and type of paper in the bypass tray, and then

touch the [BYPASS] key. Printing will begin automatically.

"Paper Source" and "Paper Type" cannot be

simultaneously selected.

The size and type of paper loaded in each tray and whether or

not the paper loaded in each tray can be used for printing are

specified in the "TRAY SETTINGS" of the system settings.

(See "SYSTEM SETTINGS (GENERAL)" in the operation

manual.)

If you wish to select the "Paper Source" or "Paper Type" when

printing, be sure to select these settings in the "Configuration"

tab of the printer driver setup screen. (See "CONFIGURING

THE PRINTER DRIVER" in the software setup guide.)

Note

1PRINTING FROM WINDOWS

CONTENTS

Basic printing (part 4)

Auditing mode

When "AUDITING MODE" is enabled in the system settings

(administrator), a 5-digit user number must be entered in the

printer driver setup screen in order to print. User numbers are

stored in the system settings (administrator). (See "ACCOUNT

CONTROL" in the "SYSTEM SETTINGS (ADMINISTRATOR)"

in the operation manual.)

The "User Number" entry screen appears when the "User

Number" checkbox is selected on the "Job Handling" tab of the

printer driver.

Enter your 5-digit user number in "User Number" and click the

"OK" button.

About the "No Offset" function setting

If the "No Offset" checkbox is selected in the "Main" tab of the printer driver setup screen, offset output will be prohibited regardless

of the setting of "OFFSET FUNCTION SETTING" in the system settings (administrator).

When stapling is performed (a setting other than "None" is selected in "Staple" in the "Main" tab), "No Offset" is automatically

enabled and the offset function cannot be used.

*The finisher is needed in some countries and regions to use the offset function.

To have the job handling screen automatically appear

each time you open the printer driver to print, select the

"Auto Job Control review" checkbox in the "Job

Handling" tab of the printer driver setup screen.

●If "CANCEL JOBS OF INVALID ACCOUNTS" is

enabled in the system settings (administrator) and

printing is attempted without entering an user number,

or an invalid user number is entered, printing will not

take place. To allow printing without the entry of a valid

user number, disable "CANCEL JOBS OF INVALID

ACCOUNTS". In this case, the number of pages

printed is added to the [OTHERS] count.

●If the machine's PPD file is used with the Windows

standard PS printer driver, auditing mode will be

disabled and print counts will not be kept for each

account.

Note

Caution

Andere Handbücher für MX-M310

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sharp Drucker Handbücher

Sharp

Sharp AR-M451N Bedienungsanleitung

Sharp

Sharp BP-1200S Benutzerhandbuch

Sharp

Sharp DX-B350P Bedienungsanleitung

Sharp

Sharp SX 1075 Bedienungsanleitung

Sharp

Sharp DX-C200P Operation Montageanleitung

Sharp

Sharp AJ-2200 Einrichtungshandbuch

Sharp

Sharp MZ-80P4 Bedienungsanleitung

Sharp

Sharp MX-B557P Bedienungsanleitung

Sharp

Sharp SF-7200 Bedienungsanleitung

Sharp

Sharp DX-B351PL Bedienungsanleitung

Sharp

Sharp AR-M350N Bedienungsanleitung

Sharp

Sharp CE-126P Bedienungsanleitung

Sharp

Sharp BP-50C26 Bedienungsanleitung

Sharp

Sharp AJ-2000 Einrichtungshandbuch

Sharp

Sharp AR-5127 Bedienungsanleitung

Sharp

Sharp AJ-6110 Bedienungsanleitung

Sharp

Sharp SF-2014 Bedienungsanleitung

Sharp

Sharp AR-M350 Imager Bedienungsanleitung

Sharp

Sharp AR-3551 Bedienungsanleitung

Sharp

Sharp SF-7300 Bedienungsanleitung

Sharp

Sharp JX-730 Bedienungsanleitung

Sharp

Sharp AR-M208 Bedienungsanleitung

Sharp

Sharp AJ-1100 Einrichtungshandbuch

Sharp

Sharp MX-2615N Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung