IDENTIFICATION OF PARTS
A. Digital tire gauge nozzle
B. LED flashlight (white light)
C. Emergency LED flasher (red light)
D. Philips head screwdriver
E. Flat head screwdriver
F. Bottle opener
G. Knife
H. Automatic glass breaker
I. Key chain
J. Tire gauge power button
K. LCD display
L. LED light power button
M. Belt clip (not shown)
N. Battery door (2 preinstalled, replaceable AG13/LR44 alkaline button cell batteries — not
shown)
FUNCTIONS
LED Flashlight / Emergency Flasher
Press the LED light power button once to activate the white LED flashlight (white light). Press
again to activate the emergency LED flasher (red light flashes “S.O.S.” in Morse Code). Press a
third time to turn LEDs off.
AUTOMATIC GLASS BREAKER
In the event of an emergency, hold the device firmly by the body with the LED pointed toward
you and the tip of the Automatic Glass Breaker against the window or windshield of your vehicle.
Press the device slowly and firmly against the glass. When you have pressed it all the way, a
spring-loaded metal point will be triggered to strike the glass with intense pressure. Repeat
these steps until all the glass is broken and you can exit the vehicle. WARNING: PLEASE USE
EXTREME CAUTION. DO NOT “TEST” THIS FUNCTION ON YOUR BODY or on a car, or on any other
property. This could cause extreme injury, or serious damage to your property. Use this feature
only for its intended purpose and keep out of reach of children.
DIGITAL TIRE GAUGE
Press the tire gauge power button to measure tire pressure in PSI. Press it a second time to
measure tire pressure in BAR. Press it a third time to measure in KPA. To read your tire pressure,
press the digital tire gauge nozzle against the tire stem. The tire pressure will appear instantly
on the LCD display and remain on the screen for about 15 seconds. After 15 seconds, the LCD
display will return to 0.0 and turn off automatically to conserve battery power. You can also press
the tire gauge power button for 3 seconds to turn it off manually.
- 2 -
