Shenzhen Ip607 Bedienungsanleitung

ENGLISH

USER MANUALV1.0

IP607

/IP607W

1.DESCRIPTION OF PRODUCT ----------------------------------------------------1

1.1 Packing --------------------------------------------------------------------------------2

1.2The Lowest System Configuration-----------------------------------------------2

1.3 Features -------------------------------------------------------------------------------2

2. INSTALLATION OF IP607W--------------------------------------------------------3

2.1 Installation Preparation-------------------------------------------------------------3

2.2 hardware installation----------------------------------------------------------------3

2.3software installation------------------------------------------------------------------3

3.CONFIGURATION OF IP607W-----------------------------------------------------4

3.1 get ip address of ip607w in internal network---------------------------------4

3.2.Software Edition Update-----------------------------------------------------------5

3.3.Login the configuration page of ip607w----------------------------------------6

3.4.real-time monitoring on interface operation-----------------------------------6

3.4.1.Visitor Operating-------------------------------------------------------------------6

3.4.2. Operator Operating--------------------------------------------------------------7

3.5.Administrator operating------------------------------------------------------------7

3.5.1.Device Information----------------------------------------------------------------7

3.5.2.Device Name Settings-----------------------------------------------------------7

3.5.3.Device Clock Settings------------------------------------------------------------8

3.5.4.Device User Settings-------------------------------------------------------------8

3.5.5.Multi-Channel Device Settings-------------------------------------------------8

3.5.6.Basic Network Settings----------------------------------------------------------9

3.5.7.Wireless LAN Setting-------------------------------------------------------------9

3.5.8.ADSL Settings----------------------------------------------------------------------9

3.5.9.UPnP Settings-------------------------------------------------------------------10

3.5.10.Dynamic Domain Name Settings------------------------------------------10

3.5.11.Mail Service Settings---------------------------------------------------------10

3.5.12.Service Settings---------------------------------------------------------------10

3.5.13.Alarm Service Settings-------------------------------------------------------11

3.5.14. System Software Upgrade-------------------------------------------------11

3.5.15. Restore Factory Default Settings-----------------------------------------11

3.5.16.Device Reboot-----------------------------------------------------------------12

3.5.17.Return----------------------------------------------------------------------------12

4. IP607W HOW TO VIEW IP607W-----------------------------------------------12

4.1 LAN VIEW-------------------------------------------------------------------------- 12

4.2 INTERNET VIEW------------------------------------------------------------------13

4.2.1Internet Connect Internet by ADSL directly-------------------------------13

4.2.2.Internet Connect Internet by LAN---------------------------------------- 14

5. TECHNICAL PARAMETER-------------------------------------------------------16

5.1.Key Function------------------------------------------------------------------------16

5.2.Key Parameter---------------------------------------------------------------------16

6. APPENDIX----------------------------------------------------------------------------17

CATALOGUE

THE 1ST CHAPTER

DESCRIPTION OF PRODUCT

1.1 PACKING

Packing in detail as follow (If find any missing parts , please contact your supplier

immediately):

1ǃIP607W, Bracket

2ǃDriver

3ǃPower Adapter

4ǃB-B Network Cable

Description of IP607W, please refer to Picture 1.1 and 1.2

˄Picture 1.1˅˄Picture 1.2˅

1.2 THE LOWEST SYSTEM CONFIGURATION

The lowest system configuration of your PC when use this IP camera

1Pentium III CPU or above, 1GHz frequency or higher

2. 256M built-in memory or above

3. 10M network card or above

4. Operating System: Windows XP, Windows 2000 or above;

Install internet explorer 4.0(or above) browser, we suggest you to use internet explorer 6.0/7.0

Browser for view.

1.3 FEATURES

Easy installation—IP607W is an independent system, with built-in CPU and picture decoder; Just

one power adapter and LAN connection can make it work.

Suitable for home, office and public place----No matter monitoring of home, office or public place,

or for amusement only, this IP camera can match your needs Support multiform protocols---TCP/IP

network protocol,

SMTP protocol, HTTP protocol and other protocols related to internet.

Simple configuration---with standard Web browser in administrator interface. Administrator can

control and manage IP camera by LAN or Internet.

Viewing/Recording--- clear user interface to view real-time pictures. Even when you leave for a while,

IP607W will record the pictures and transfer files to your PC. Files will be saved in the form of standard

windows media, suitable for extensive application program.

Dynamic Monitoring---capturing any tiny pictures and send to your mail box. IP607W will automatically

compare the two continuous pictures and find out the changes caused by moving.

Support DDNS---In order to view the pictures by internet, users must know the gateway IP address

when using IP607W. However, if your gateway IP address is dynamic, you must have dynamic domain

server. As usual, many of the gateway don’t support dynamic domain service, So it is limited when

using IP607W.

User management---If require, only authorized users can view real-time video, and before that, users

must enter their user names, passwords. Maximum users: 8 persons The 2nd Chapter

INSTALLATION OF IP607W

Quickly view the installation manual, after finishing the procedures step by step, IP607W will work

accordingly. IP607W can be used in LAN, you will find the IP address in LAN by carrying out IP Camera

Tool program on PC,then input this IP address into the IE browser address field ( such as http://192.168.

1.100/),so it can connect IP607W and camera interface can be shown on browser page. For external

network visit, a prior suitable configuration of IP camera in LAN is required, please refer to the instructions

in the following chapters.

2.1 INSTALLATION PREPARATION

Please make sure you have already read the user manual carefully and know well about the functions

and configurations of IP607W before installation. Then, use the enclosed network cables to connect

IP607W to Internet, via router or switch. Please prepare the router and switch by yourself.

2.2 HARDWARE INSTALLATION

This part is for introducing how to finish hardware installation and physical connection of IP607W. After

it, please connect power supply, IP607W will start work and the indicator light will shine.

1Install the IP camera at the place where monitoring required.

2connect network

Connect IP camera with hub (10ˋ100M) or switch (10ˋ100M), insert one end of the network cable into

RJ45 port, the other end into router or switch. Indicator light at RJ45 port will flash under normal condition

3connect to the power supply

Pleaser use the enclosed power adapter in package to connect the IP camera and power supply,

otherwise you will damage the hardware

1. Make sure the length of the network cable is within validity range, If over 100M, Please

use signal amplifier.

2. Please use the power adapter we supply, otherwise you will damage the hardware.

3.If you connect PC to IP607W directly, please make sure the crossover cable is used.

4check LED light

After connect to the power supply, IP camera will start work and the small yellow light at the back of it

will shine. In dark condition, you will see the light at the front of camera. Four infrared lights will be as

lamp-house to let you see clear picture in dark.

2.3 SOFTWARE INSTALLATION

Please use the enclosed IPCAMSETUP.EXE software to start initial installation on your PC. After it, IP

Camera Tool will search all IP addresses of IP607W in the same network space automatically.

1Please use the enclosed driver, then you will see the welcome interface of installation program.

2Introduction interface of installation will be shown. After read it, press” Next” to continue installation.

Please refer to Picture 2.4

Picture 2.4: Installation interface 1

3. Installation guidance will help you to finish the installation. Please press “NEXT” buttons in turn,

pleaser refer to Picture 2.5

Picture 2.5: continue the installation

4When finish the installation, please restart your computer. Please refer to Picture 2.6 .

After finish the 2nd chapter, IP607W can work in LAN. We can find the IP address of IP607W by IP

camera Tool program and visit IP607W by browser. (input IP address and port number of IP607W into the

IE browser address field, such as “http://192.168.1.112:100”ˈthen press” enter”. If the port number is 80,

then you can input IP address http://192.168.1.112 directly, without port number), Please note that our

factory default setting of the port number is 80 .

Now we can configure IP607W by operating web configuration page . If you want to view the monitoring

picture by browser, or to operate IP607W web configuration page, you should know the IP address and

port number of IP607W.

We supply IP Camera Tool Program, which is used for searching IP address and port number of IP-607W

in LAN only (both IP607W and our PC are in the same network space), but not for searching IP address

and port number of IP607W in external network( IP607W and our PC are not in the same network space).

If we want to visit IP607W through external network, we must configure IP607W in LAN at first.

About how to make a external network visit or detail information of setup, please refer to the following

descriptions.

3.1 GET IP ADDRESS OF IP607W IN INTERNAL NETWORK

Please pay attention to the below instruction before getting IP address

Picture 2.6 : finish installation

THE 3RD CHAPTER

CONFIGURATION OF IP607W

Ɣke sure the device has connected to the power supply and network connection is correct

Ɣhe LAN or PC should support DHCP(Dynamic IP Distribution), because the IP camera has been set

up to get dynamic IP address; if no this function, you will not search out the camera (Please refer to

the dialog box for operation)

1double press IP Camera Tool.

2As the following dialog box on PC: You will see the IP address after more than 10 seconds, if camera

connect to the power supply just for a minute.

3If the camera is not in the same network space, please do as followed:

Click the left button of the mouse to choose the prompts and click right button to select the related items,

as shown below:

make a manual change as the picture shown :

Please do not choose “automatically get IP”, if your LAN or PC doesn’t support DHCP. You can set up

the camera IP address according to the network space of LAN or PC, but it should be different from that

of other devices or PC in the same network space( the first 3 items and subnet mask should be same) .

You can change the port setting on the page only.

Please choose “automatically get IP”, if your LAN or PC supports DHCP.

3.2 SOFTWARE EDITION UPDATE

IP607W supports the upgrade of system software and application software, application software

applicable for interface upgrade.

3.3. LOGIN THE CONFIGURATION PAGE OF IP607W

If input the IP address of IP607W into the IE browser address field and press “Enter”,or directly double

press the listed IP address in the dialog box of IP Camera Tool, IE browser will be start up automatically

and the administrator login window will also appear.

Input the user name, password (the defaulted user name: admin, l the defaulted password : leave it

blank), click “sign in” to view the monitoring page (supports synchronous view of maximum 8 users )Ǆ

3.4 REAL-TIME MONITORING

(Control Area)

Notice: If no picture shown for the first-time use, you can set the user-defined security grade of option

“Internet” of IE browser: namely, unsigned control can be set up as the status of “ startup/prompt”

3.4.1 Visitor Operating

working status for each channel as followed:

For example: channel 1 is monitoring (motion detection status) if is flickering.

Click the right key for 4-picture view

Video on/ off

Recording: press to save the recording files through appointed path.

Take picture: press to capture and save pictures through appointed path.

Green button: normal connection & display

Gray button : connection unavailable

Red button: camera alarms (motion detection alarm)

3.4.2 OPERATOR OPERATING

Press , to set up following parameters

PTZ control Resolution˖GA˄640 X 480˅/ QVGA(320 X 240)

working mode˖0Hz/60Hz/outdoor

photo parameters˖

Press or to adjust the brightness or contrast.

3.5 ADMINISTRATOR OPERATING

Press , to enter into administrating page.

3.5.1 DEVICE INFORMATION

Click , please refer to the following picture:

The sequence number of the device: our factory sequence number.

Edition of system firmware of device: edition of system software of IP606W

Edition of application firmware of device: edition of application software of IP607W

3.5.2 DEVICE NAME SETTINGS

Click , please refer to the following picture:

Name : set up the name for the camera

3.5.3 DEVICE CLOCK SETTINGS

Click , please refer to the following picture:

3.5.4 DEVICE USER SETTINGS

Click , please refer to the following picture:

IP607W can set up maximum 8 users and permissions

3.5.5 MULTI-CHANNEL DEVICE SETTINGS

Click , please refer to the following picture:

For example: add the 2nd channel image

Click , please refer to the following picture:

IP CAMⱘHostˈHttp PortUserPassword

Input the Host ,Http Port, User, Password, Click ,then ,and then to switch

to 4-picture monitoring mode, as following:

3.5.6 BASIC NETWORK SETTINGS

Click , please refer to the following picture. For example, the IP address of this

device can be set up as follows:

Please set up IP address, subnet mask, gateway, DNS server well. Dynamic IP setting also available

Please choose and click for confirmation.

3.5.7 WIRELESS LAN SETTINGS

Click , please refer to the following picture. If WIFI is required, please set it up

as follows:

Please choose and click for confirmation.

3.5.8 ADSL SETTINGS

Click , please refer to the following picture, with the purpose of connecting ADSL.

3.5.9 UPNP SETTINGS

Click , please refer to the following picture. It is

unnecessary If the router does not have this kind of function.

3.5.10 DYNAMIC DOMAIN NAME SETTINGS

Click , please refer to the following picture:

DDNS Service: Fill in the web address for applying the domain name

DDNS User: Fill in the domain name

DDNS Password: Fill in the password of the domain name

DDNS Domain Name: DDNS domain name will automatically get the IP if connect well.

DDNS Status: Display the status of connecting the domain name

It will be necessary to set up this function if you want to make a visit through Internet.

Please choose and click for confirmation

This is with mail alarm function: if any movement was detected, it will send message to the email box

which we have set up.

Sender: Fill in the e-mail address of senders

Receiver: Fill in the e-mail address of the receiver ( 4 receivers’ e-mails can be set up

synchronously

SMTP Server: Fill in the server address of the sender’s e-mail

SMTP User : Fill in the user name of the sender’s e-mail

SMTP Password: Fill in the password of the sender’s e-mail

This function can be effected only if the camera has been connected to Internet; It is necessary that the

newly-revised password will be same as the e-mail password .

3.5.11 MAIL SERVICE SETTINGS

Click , please refer to the following picture:

3.5.12 FTP Service Settings

Click , please refer to the following picture:

This function is to upload the pictures to the Internet.

FTP Server: Fill in the web site to be uploaded

FTP Port: Fill in the FTP Port

FTP User: Fill in the FTP user name

FTP Password: Fill in the password of the FTP user

FTP Upload Folder: Fill in the file name to be uploaded

FTP Mode: Select PORT

Upload Image Now: Click it if needed

Upload Interval: setup the interval; Unit : second

3.5.13 ALARM SERVICE SETTINGS

Click , please refer to the following picture:

Select the alarm mode. For example, if select motion detection mode, you can refer to the following

pictures:

Select Alarm Mode by yourself: IO linkage, or e-mail sending, or image upload

Following information is an example for selecting the method of email sending:

Click for confirmation.

Click , please refer to the following picture:

3.5.15 RESTORE FACTORY DEFAULT SETTINGS

Click , and re-start the device, the factory default settings can be restored

accordingly.

3.5.14 SYSTEM SOFTWARE UPGRADE

3.5.16 DEVICE REBOOT

Click , it will re-start the device, but former settings unchanged.

3.5.17 RETURN

Cilck , it will return to the monitoring interface.

THE 4TH CHAPTER

HOW TO VIEW IP606W

After adjust IP607W on the Web page, you can visit it through Internet accordingly. This will be divided

into two conditions: LAN View and Internet View. And about Internet View, it will be divided into the modes

of dynamic connection and static connection, on the basis of IP607W’s connection method with Internet

4.1 LAN VIEW

(sketch map of LAN view)

Under this mode, PC and IP607W is in the same LAN, both of them can be connected with each other

by network cable, or hub, or switch. IP address is a private one(like192.168.1.*), subnet mask: 255.255.

255.0.

1. if you choose the connection like 4.1.ķ(in sketch map of LAN view), please make

sure you will use crossover cable; if not, you can not connect it to your IP607W normally.

2. Hub and switch in picture 4.1.ĸand Ĺ(in sketch map of LAN view), can replace each

other, there is no difference!

Firstly, finish the installation of IP Camera Tool as the steps above-mentioned (anyway, you should have

to install the IP Camera Tool well at first, then you can find the IP address, and make the other advanced

operations)

view via “IP camera tool”

After run IP Camera Tool of IP607W,it will search the IP607W in LAN automatically and show IP address

and name on the window, you just need to double click this IP address, then PC will display IE browser

window and the login interface, input user and password, you can enter into monitoring page for view.

Please remember the IP address, it is surely required if you hope to use web browser for view.

nput IP address into IE browser address field for direct view

Input the IP address and port number of IP607W into IE browser address field , click “enter”, input

account no. and relative password, then you can see images on web,

Note: if port no. is 80, you can input IP address directly!

4.2 INTERNET VIEW

4.2 IP607W PICTURE 4.2 VIEW FROM INTERNET

When PC and IP camera is not in the same network space, it is set at the two ends of internet, show

as picture4.2, this requires to set up IP607W correctly, based on the connection method between IP607W

and Internet

4.2.1 CONNECT INTERNET THROUGH ADSL DIRECTLY

When IP607W connects to internet through the dial-up of ADSL (show as follows), its IP address is

dynamic and changeable . Every connection to Internet via the dial –up of ADSL,IP camera will get a

temporary and different IP address from ISP

For this case, we can fill ADSL’s user name and password on IP607W interface, and choose the option

of “use dial-up of ADSL for connection”, and the option of “use email to inform ADSL’s IP address” , picture

as below.

When camera is powered, the dial-up of ADSL will automatically run to connect Internet, ISP will assign

a dynamic IP address to the camera while send this address to user by email. User can use IP address

and port no. to visit IP camera and monitor the images, via IE browser.

As the IP address of Internet is changeable, namely, ISP will assign a new IP address to router for each

dial-up, obviously it is not easy for users to remember it. So, we can make use of DDNS to bind the IP

address with a domain name together, which is applied by user and easy to remember, then it becomes

simple for us to input domain name and port no. in browser.

How to use DDNS

1. Register DDNS service with the supplier, then you will get a domain name, together with an account

and a password.

2. Input correct DDNS settings on the page of IP607W

3. When the Internet IP address is changed, IP607W will connect to DDNS server automatically, advising

itself the new IP address.

4. User only need to input domain name assigned by DDNS server into IE browser address field, browser

will connect IP607W automatically.

1.you need to apply for this service at DDNS server.

2. you need to operate as DDNS service supplier says

4.2.2 CONNECT INTERNET BY LAN

1.Picture 4.5 IP607W use static IP address to connect Internet

Under this mode, the network where IP607W exists use the dial-up of ADSL or other ways to

connect Internet, and the whole LAN share the same external IP address, IP cameras in LAN can be

differentiated by port Numbers.

With this connection and to visit IP607W via internet, some necessary setup on IP camera and

router will be required:

You need to set up IP address of IP607W as static one, and also set up the port number, for example,

the static address of IP_cam1,IP_cam2 is respectively “192.168.1.101”ˈ“192.168.1.102”ˈport

number is 81ˈ82

2. Open your router, find port transfer page( some routers named dummy service), make the rules

for the port transfer, and please remember the port no. of IP607W after It is assigned

3After finish the settings of IP607W, input the external IP address in Internet of

the router and corresponding port numbers of IP607W into the browser at PC end, then you can view

the picture.

For example: as picture 4.5, the external IP address in Internet of router is 219.134.248.11,IP address

in LAN is 192.168.1.1(gateway address),static IP address of IP607W_1 is 192.168.1.101ˈport number

is 81, static IP address of IP607W-2 is 192.168.1.102ˈport No. is 82. Set up the port transfer of the router

as follows:

camera transfer port start port IP address

IP607W-1 81 81 192.168.1.101

IP607W-2 82 82 192.168.1.102

When user input http:// 219.134.248.11˖81 on PC, router receives application and automatically

transfers to 192.168.1.101ˈafter that, IP607W 1 and PC will be connected together, then user can view

IP camera through the browser on PC.

Similarly, we need to know and remember the IP address in Internet of the whole LAN, as below picture,

IP address in Internet is “219.134.248.11”ˈthis address can open router page.

THE 5TH CHAPTER

TECHNICAL PARAMETER

5.1 KEY FUNCTIONS

ƔǂSupport UPNP protocol, can penetrate the gateway automatically,

Ɣǂeasily plug and play.

ƔǂSupport DDNS service

ƔǂSupport IE browse

ƔǂDynamic IP address distribution

Ɣ%LGLUHFWLRQDOYRLFH

5.2 KEY PARAMETERS

Image Compression Format M-JPEG

Sensor CMOS,1/4”

Image Resolution VGA˄640x480˅/QVGA˄320x240˅

Network Interface RJ-45/10-100 Base T ˈ802.11b/g

Network Protocol TCP/IPˈDHCPˈSMTP,TPˈDDNSˈUPNPˈPPPoE

Image Transfer Velocity30frames/sec(QVGA), 15frames/sec(VGA)

Alarm Control Output:1channel(5VDC,0.1A);

Input:1 Channel (closed trigger)

Motion Detection Support

Software Update Automatic upgrade

Monitoring Mode IE browse

Playback Mode Microsoft Media Player

Security Password protection

Minimum Illumination 0Lux

Automatic white balance Support

Working Condition 0 - 50C°ˈ20% - 80%PH

Power Adapter AC 220V-110V/DC 5V 1A

Power Consumption 3W

Figure Size 100mmh100mmh110mm

Net Weight 0.5Kg

6.1 RESTORE FACTORY DEFAULT SETTINGS

Sometimes factory default setting can be restored by making use of web page, if users can not enter

into web page, the below methods can be followed.

Turn off the power supply, and press the restoration button at the bottom of IP607W, then connect the

power supply again, after a few seconds ,the green LED will flash, factory default setting of all parameters

can be restored.

6.2 TROUBLE SHOOTING

1ǃCan not find the device by making use of the searching program.

Please check if there is a correct physical connection? A-B network cable will be required if device

connects with the PC directly

2ǃCan not open the web page.

The IP addresses of PC and the device are not in the same web space, or different subnet mask, or

the IP addresses of devices are in conflict. The IP address of PC can not be set up as “automatically

obtain IP”.

3ǃCan view the web page, but no picture.

Please check if the security level setup and the control installation are in the right way.

4ǃLong-distance browse unavailable

Please check if the setup of the local gateway and the router is in the right way? Namely, the

corresponding port of equipment and the mapping of IP address should be set up correctly.

Please check if the security level setup and the control installation are in the right way.

The anti-fire wall has some restrictions on the devices

THE 6TH CHAPTER APPENDIX

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Shenzhen IP-Kamera Handbücher

Shenzhen

Shenzhen IPA01-725 Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung

Shenzhen ip607 Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken