Shenzhen DXL360 Bedienungsanleitung

DXL360/S Digital Protractor

User Guide

Features:

1) DXL360S: High accuracy ± (0.08° + 1%), high resolution 0.01°

DXL360: ± (0.15° + 1%), resolution 0.02°

2) Laser Alignment

3) Dual and Single axis with user friendly LCD display angle

4) Rechargeable

5) V Shape metal case for easy to fit at the corner or pipe.

6) Magnetic base

7) Audible alarming at settable angle range

Specifications

Accuracy: DXL360S: ± (0.08° + 1%)

DXL360: ± (0.15° + 1%)

Measuring range: Single axis: 360°, Dual axis: ±40°

Resolution: DXL360S: 0.01°

DXL360: 0.02°

Response time: <0.4 second

Audio sound: 60dB @ 30cm

Operating temperature: 0 to 50°C

Storage temperature: -10 to 60°C

User Interface: Mono-color LCD with backlight

Supply Power: Rechargeable Li-Ion Battery, 3.7Volt.

Charger port: 5V 500mA Mini type-B USB port

Power Consumption: Standby: 200uA, Operation: 20mA.

Standby Battery Life: 2000 hours

Operating Battery Life: 40 hours

Dimensions (in mm): 66(L) x 64(W) x 29(H)

Magnetic Base: affix at the bottom and back.

Button Functions

Function Descriptions

Button Normal Mode Set Mode

ON/OF

In normal operation, this button turns

the device ON/OFF.

Press and hold for 3 seconds to

enable or disable backlight

Serves as the

upward key

for option

selection.

HOLD When pressed, the current value will

be freezed, the unit icon will

be flash to indicate the reading is on

hold.

Press and hold for 3 seconds to

enable or disable sound.

The icon on LCD will be

Serves as the

downward

key for option

selection.

displaced accordingly. The buzzer

beep could be set at different

accuracy level. Refer to section

“Angle Alarming”.

ZERO When pressed, the current reading is

set to zero; subsequent

measurements are relative to this

reading. The LCD will show

the icon to indicate the device is

in zero mode.

Press and hold for 3 seconds to

enter Set mode, for set mode

options.

Serves as the

Set key.

LCD Icons Representations

Battery status indication icons

These icons indicate the battery

level. There are 3 levels

representing empty, half and full.

When the

In dual-axis mode, the LCD

displays the direction of tilt

graphically. The unit of scale is

displayed below the graph with

different scales. The scale is

adjusted automatically depending

on the measured angle. These

icons show the available scales.

Degree mode. Flash when unit is

HOLD mode

Sound notification on.

Blank as off

Show this logo as relative value is

showing. When the Zero button is

pressed, the unit reset current

angle to zero.

Direction of tilt icons, show the tilt

angle direction with respect to the

unit bottom right hand corner.

Dual-Axis Mode. Both the X and Y

axis angle will be showed. Dual

axis mode measures inclination

upto +-40 degree for each axis

before it automatically switch to

single axis mode.

Single Axis Mode. Measure slope

upto +-90 degree.

The triangle icon indicates the

direction of tilt with respect to the

bottom right corner of the unit.

Battery Charging

It has a built in Lithium Ion rechargeable battery. A standard charger is

supplied that the input voltage is 110V to 240V AC, 50/60Hz, and the

output is 5V DC, 500mA. The charger operating procedure is list below:

1) Plug the Charger into AC socket, the RED on the charger should

turned ON,

2) Plug the USB charging cable to the Charger,

3) Insert the other end of the USB cable to the unit,

4) The battery icon on the LCD blinks to indicate charging in process.

Upon charging complete, the icon stops blinking.

5) The charging time is approx. 3 hours.

The unit could also be charged by connecting the USB cable to the unit

and a computer’s USB port. This has the same effect when charging the

unit with the provided adaptor.

Note: When the unit is turned OFF, and plug in the USB charge cable,

the LCD will no show anything, it is NORMAL. Once the unit is turned ON,

the battery icon should flash indicating the unit is in charging mode.

Relative/ Absolute Measurement

Relative Measurement

LCD Icon:

Absolute Measurement

LCD Icon: Blank

Relative and Absolute Mode Switching:

1 Press and release the “ZERO” key to set the relative

measurement zero point

2 Press and release the “ZERO” key to cancel the relative zero

point and back to absolute measurement mode.

Hold Function

Holding Mode:

LCD Icon blinking:

Holding function:

1. Press and release the “HOLD” key to activate holding function,

digit will freeze.

2. Press and release the “HOLD” key to cancel the holding

function.

Auto Power Off

For no movement in 30 minutes, the unit will power off.

Or we can set to never sleep mode at below instruction.

Power auto off setting:

1. Press and hold “ZERO” key and enter MENU mode

2. Select “POWER” by “ON/OFF” and “HOLD” key, press “ZERO”

key to enter Power mode

3. Scroll “NEVER” or “30MIN” by “ON/OFF” and “HOLD” key

4. Press “ZERO” key to confirm NEVER or 30MIN (30 minutes)

sleep

Restore Factory Setting

When you find that the unit is abnormal, you can restore the unit to

factory setting.

All calibration setting will be restored to factory setting.

*Not suggest restore to factory setting in normal status, if for accuracy

drift, please follow Calibration. After factory set, please redo calibration

to ensure the accuracy.

Restore to factory setting:

1. Press and hold “ZERO” key and enter MENU mode

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Laser-Nivelliergerät Handbücher anderer Marken

Nedo

Nedo ET-5 Bedienungsanleitung

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Bedienungsanleitung

LaserLiner

LaserLiner X2-Laser Bedienungsanleitung

Spectra

Spectra LL300N Bedienungsanleitung

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Bedienungsanleitung

Nedo

Nedo Crossliner 4 Bedienungsanleitung

Lasertec

Lasertec FX360G Bedienungsanleitung

Flex

Flex ALC 8 Bedienungsanleitung

Black & Decker

Black & Decker LZR5 Bedienungsanleitung

Johnson

Johnson 40-6692 Bedienungsanleitung

Cocraft

Cocraft HL 20-SG Bedienungsanleitung

Zircon

Zircon iLine Bedienungsanleitung

HWH

HWH 310 SERIES Bedienungsanleitung

Leica

Leica iCON robot 60 Bedienungsanleitung

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Bedienungsanleitung

LaserLiner

LaserLiner ActiveFinder XP Bedienungsanleitung

DeWalt

DeWalt DW082 Bedienungsanleitung

imex

imex EL20 Bedienungsanleitung