Sherwood CD-5090 Bedienungsanleitung
Compact Disc Player
Compact Disc-Spieler
Lettore compact disc
Reproductor de Discos Compactos
CD-5090C/R
OPERATING INSTRUCTIONS
BEDIENUNGSANLEITUNG
ISTRUZIONI PER L’USO
MANUAL DE INSTRUCCIONES
ENGLISH
UNPACKING AND INSTALLATIONUNPACKING AND INSTALLATION
IntroductionIntroduction
This symbol is intended to alert the
user to the presence of uninsulated
"dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION
Invisible laser radiation when the unit is open. Do
not stare into beam.
CAUTION : USE OF ANY CONTROLS, ADJUSTMENTS,
OR PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
WARNING
Congratulations on your purchase!
Your new high fidelity Compact Disc Player is designed to deliver maximum enjoyment and years of trouble
free service.
Please take a few moments to read this manual thoroughly. It will explain the features and operation of your unit
and help ensure a trouble free installation.
Please unpack your unit carefully. We recommend that you save the carton and packing material. They will be
helpful if you ever need to move your unit and may be required if you ever need to return it for service. Your
unit is designed to be placed in a horizontal position and it is important to allow at least two inches of space
behind your unit for adequate ventilation and cabling convenience.
To avoid early damage, never place the unit near radiators, in front of heating vents, in direct sunlight, in
excessively humid or dusty locations or near sources of strong magnetic fields. Connect your complementary
components as illustrated in the following section.
CAUTION : TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CLASS 1
LASER PRODUCT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
2
Introduction
ENGLISH
READ THIS BEFORE OPERATING YOUR UNIT
Units shipped to the U.S.A. and Canada are
designed for operation on 120 V AC only.
Safety precaution with use of a polarized AC plug.
However, some products may be supplied with a
nonpolarized plug.
CAUTION : To prevent electric shock, match wide
blade of plug to wide slot, fully insert.
ATTENTION : Pour eviter les choc electriques,
introduire la lame la plug large de la borne
correspondante de la prise et poussre jusqu’au
fond.
FOR U.S.A.
FCC INFORMATION
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following
measures :
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio TV
technician for help.
CAUTION : Any changes or modifications in
construction of this device which are not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
FOR U.S.A. AND CANADA 120 V
Units shipped to Australia are designed for
operation on 240 V AC only.
To ensure safe operation the three-pin plug
supplied must be inserted only into a standard
three-pin power point which is effectively earthed
through the normal household wiring. Extension
cords used with the equipment must be three-core
and be correctly wired to provide connection to
earth. Improper extension cords are a major cause
of fatalities.
The fact that the equipment operates satisfactorily
does not imply that the power point is earthed and
that the installation is completely safe. For your
safety, if in any doubt about the effective earthing
of the power point, consult a qualified electrician.
PAN-EUROPEAN UNIFIED VOLTAGE
All units are suitable for use on supplies 230 - 240 V
AC.
FOR EUROPE AND AUSTRALIA 230 V/240 V
FOR YOUR SAFETY FOR YOUR SAFETY
Units shipped to countries other than the above
countries are equipped with an AC voltage selector
switch on the rear panel. Refer to the following
paragraph for the proper setting of this switch.
AC VOLTAGE SELECTION
This unit operates on 110 - 220 V AC. The AC
voltage selector switch on the rear panel is set to
the voltage that prevails in the area to which the
unit is shipped.
Before connecting the power cord to your AC outlet,
make sure that the setting position of this switch
matches your line voltage. If not, it must be set to
your voltage in accordance with the following
direction.
FOR OTHER COUNTRIES 110 V/ 220 V
FOR YOUR SAFETY
AC voltage selector switch
Move switch lever to match your line voltage
with a small screwdriver or other pointed tool.
AC 110 V AC 220 V
3
Introduction
UNPACKING AND INSTALLATION 2
READ THIS BEFORE OPERATING YOUR UNIT 3
System Connections 5
Controls 6
Before Operation 10
Operations
PLAYING A DISC 11
SEARCH AND SKIP PLAY 12
PLAYING A DISC IN RANDOM SEQUENCE (RANDOM PLAY) 12
PLAYING THE FIRST 10 SECONDS OF EACH TRACK (INTROSCAN PLAY) (ONLY FOR CD-5090R) 12
REPEAT PLAY 13
PLAYING TRACKS IN ANY SEQUENCE (PROGRAMMED PLAY) 14
EDITING FOR RECORDING 16
SELECTING A BRIGHTNESS OF THE DISPLAY (ONLY FOR CD-5090R) 18
SELECTING A TIME DISPLAY 19
USING THE HEADPHONES 19
Troubleshooting Guide 20
Specifications 21
Introduction
CONTENTS
ENGLISH
4
System Connections
ENGLISH
CD
L
R
AC INPUT
230V~50Hz
12W
SER. NO.
COMPACT DISC PLAYER
MODEL NO. CD-5090R
DIGI LINK
R
L
OUTPUT
DIGITAL OUTPUT
DESIGNED IN USA
ASSEMBLED IN KOREA
CAUTION: TO PREVENT ELECTRIC
SHOCK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS
INSIDE.REFER-SERVICING TO
QUALIFIED SERVICE PERSONNEL.
STEREO INTEGRATED AMPLIFIER AX-5090R
POWER
ON/OFF
PHONES
BASS
A
B
SPEAKER
CD
REMOTE SENSOR
-10 10+
TREBLE
-10 10+
BALANCE
VOLUME
DIRECT
LOUDNESS
LEFT RIGHT
MIN MAX
TUNER TAPE 1/MD PHONO TAPE 2 MONITER
DIGI LINK
①OUTPUT JACKS
Connect these jacks to the CD(or AUX) input jacks of your amplifier such as AX-5090R or receiver.
②DIGI LINK III JACKS
Connect this jack to the DIGI LINK jack of Sherwood amplifier such as AX-5090R bearing the DIGI LINK III or
II mark to control this unit remotely by DIGI LINK System.
③AC INPUT CORD
Plug this cord into a house hold AC outlet or the switched AC outlet of amplifier such as AX-5090R.
④DIGITAL OUTPUT
Digital output should be connected to digital input of amplifier or receiver to enjoy live digital sound.
You can record digital sound by connecting digital input of Mini Disc Recorder to this jack.
When making OPTICAL DIGITAL connection, do it after removing cap.
Insert cap when not using the OPTICAL DIGITAL jack.
①
Do not plug the AC input cord into the AC outlet when making connections.
Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making connections
with the supplied cords.
Refer to the connecting diagram in the operating instructions of AMPLIFIER/RECEIVER.
②
③
④
AMPLIFIER/RECEIVER
5
Controls
ENGLISH
FRONT PANEL CONTROLS
REMOTE CONTROLS(ONLY FOR CD-5090R)
ENGLISH
⑪
①②③
④
⑤
⑥
⑦
⑧
⑨
⑫⑬⑭⑮
⒃
⒗
⒖
6
⑪
⑬
⑩
ⓒ
⒔⑭
⑨
ⓔ
⑮
⑧
⑫⒕
ⓑ⑤
ⓐ
ⓓⓕ
①POWER SWITCH
Press this switch to turn the power on and press again
to turn the power off.
For system operation, plug the AC input cord into the
switched AC outlet on amplifier or receiver, keep the
POWER swith ON and control power ON/OFF with
the power operation on the amplifier or receiver.
②DISC TRAY
Load a compact disc on the disc tray.
③OPEN/CLOSE BUTTON( )
Press this button to open or close the disc tray.
④PLAY/PAUSE BUTTON( )
ⓐPress this button to start play in the stop or pause
mode.
ⓑPress this button to interrupt play temporarily and
press again to restart play.
⑤STOP/CLEAR BUTTON( )
Press this button to stop play, clear the programmed
tracks.
⑥BACKWARD SKIP/SEARCH BUTTON( )
ⓒPress this button to replay from the beginning of
the current track or return to a previous track.
ⓓPress and hold down this button search for a
specific passage in fast backward.
⑦FORWARD SKIP/SEARCH BUTTON( )
ⓔPress this button to play from the beginning of a
next track.
ⓕPress and hold down this button to search for a
specific passage in fast forward.
⑧RANDOM PLAY BUTTON
Press this button to play tracks on a CD in random
sequence.
⑨REPEAT 1/ALL BUTTON
Press this button to play a track or all tracks repeatedly.
⑩REPEAT A↔B BUTTON
Press this button to play a specific passage repeatedly.
ENGLISH
⑪NUMERIC BUTTONS
Press the corresponding button when selecting tracks
for play or programming, then the selected track is
played or programmed directly without the use of the
PLAY or PROGRAM/REVIEW button.
⑫TIME BUTTON
Press this button to display the elapsed or remaining
playing time of the current track or remaining playing
time of the disc.
⑬PROGRAM/REVIEW BUTTON
Press this button to program your favorite tracks or
review the programmed tracks.
⑭EDIT BUTTON
Press this button to edit the tracks to be recorded onto
the tape.
⑮TAPE SIZE BUTTON
Use this button to select the tape length.
⒃HEADPHONE JACK
Stereo headphones can be plugged into this jack for
private listening.
⒔INTROSCAN BUTTON
Press this button to play the first 10 seconds of each
track on a CD.
⒕DISPLAY BUTTON
Press this button to change the brightness of the
display.
⒖REMOTE SENSOR(ONLY FOR CD-5090R)
This receives the signals from the remote control.
⒗FLUORESCENT DISPLAY
For details, refer to the next page.
■Note
On the remote control, the DISC and DELETE buttons
are not available for this unit.
7
ENGLISH
FLUORESCENT DISPLAY
TIME DISPLAY
TRACK NUMBER DISPLAY
PLAY INDICATOR
PAUSE INDICATOR
REPEAT PLAY INDICATORS
PROGRAM INDICATOR
EDIT DISPLAY
RANDOM PLAY INDICATOR
MUSIC CALENDAR DISPLAY
※DIGI LINK SYSTEM REMOTE CONTROL
※This unit can be remotely controlled with Sherwood DIGI LINK III amplifier such as AX-5090R or receiver.
For available functions, refer to the compatible unit’s operating instructions.
To listen to a CD by DIGI LINK system, first make DIGI LINK connection between this unit and the Sherwood
compatible amplifier such as AX-5090R or receiver.
8
ENGLISH
REMOTE CONTROL OPERATION RANGE (ONLY FOR CD-5090R)
COMPACT DISC PLAYER CD-5090R
ON/OFF
POWER
PROG/REV
PHONES
TIME EDIT T. SIZE
REPEAT
RANDOM
12345
67890
R
LOADING BATTERIES
(ONLY FOR CD-5090R)
Use the remote control unit within a range of
about 7 meters (23 feet) and angles of up to 30
degrees aiming at the remote sensor.
Remove the batteries when they are not used
for a long time.
Do not use the rechargeable batteries (Ni-Cd
type).
Remove the cover.
1
Load two size “AA” batteries matching
the polarity.
2
9
Before Operation
ENGLISH
Only compact discs bearing this mark can be
reproduced.
Notes
Do not expose discs to direct sunlight, high
humidity or high temperature for a long time.
When loading or unloading a disc in the disc
tray, always place it with the printed side up.
The DTS logo on the front means that the CD
encoded with the DTS signal can be heard in
DTS mode when this digital out is connected
to the digital input of the amplifier with the
DTS decoder, etc..
“DTS” and “DTS Digital Surround” are
trademarks of Digital Theater Systems, Inc.
In handling a disc, hold it carefully with edges.
Do not stick paper or write anything on the
printed surface.
Fingermarks and dust on the recorded surface
should be carefully wiped off with a soft cloth.
Wipe straight from the inside to the outside of
the disc.
Always keep the discs in their cases after use
to protect them from dust and scratches.
Printed side
10
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Sherwood CD-Player Handbücher
Sherwood
Sherwood CD-772 Bedienungsanleitung
Sherwood
Sherwood CD-5505 Bedienungsanleitung
Sherwood
Sherwood CDC-690T Bedienungsanleitung
Sherwood
Sherwood CLASS1 Bedienungsanleitung
Sherwood
Sherwood CD-2030C Bedienungsanleitung
Sherwood
Sherwood CDC-5506 Bedienungsanleitung
Sherwood
Sherwood CDC-5090C Bedienungsanleitung
Sherwood
Sherwood Newcastle CD-980 Bedienungsanleitung
Sherwood
Sherwood CDC-5506 Bedienungsanleitung
Sherwood
Sherwood CDC-5506 Bedienungsanleitung
