Shimano FD-RX810 Bedienungsanleitung

(English)

Dealer's Manual

ROAD MTB Trekking

City Touring/

Comfort Bike URBAN SPORT E-BIKE

FRONT DERAILLEUR

GRX

FD-RX810

FD-RX400

DM-GAFD001-00

CONTENTS

CONTENTS .................................................................................2

IMPORTANT NOTICE ..................................................................3

TO ENSURE SAFETY...................................................................4

LIST OF TOOLS TO BE USED ......................................................6

INSTALLATION/REMOVAL .........................................................7

Installing the front derailleur................................................................7

• Installing the backup plate ...................................................................................................... 7

• Installing the front derailleur .................................................................................................. 9

• If using a band adapter (SM-AD91) to install the front derailleur...................................... 12

ADJUSTMENT ..........................................................................15

Installing the inner cable and adjusting gear shifting ......................15

• Securing the cable .................................................................................................................. 15

• Adjusting cable tension ......................................................................................................... 19

• Top adjustment....................................................................................................................... 20

• Low adjustment...................................................................................................................... 22

• Handling the cable end.......................................................................................................... 23

• Checking gear shifting and ﬁne tuning................................................................................ 24

MAINTENANCE........................................................................25

Replacing the skid plate ......................................................................25

• Removing the skid plate ........................................................................................................ 25

• Installing the skid plate.......................................................................................................... 25

IMPORTANT NOTICE

• This dealer's manual is intended primarily for use by professional bicycle mechanics.

Users who are not professionally trained for bicycle assembly should not attempt to

install the components themselves using the dealer's manuals.

If any part of the information on the manual is unclear to you, do not proceed with the

installation. Instead, consult a place of purchase or a bicycle dealer for their assistance.

•Make sure to read all owner's manuals included with the product.

•Do not disassemble or modify the product other than as stated in the information

contained in this dealer's manual.

•All owner's manuals and dealer's manuals can be viewed on-line our website (http://si.

shimano.com).

•For consumers who do not have easy access to the internet, please contact a SHIMANO

distributor or any of the SHIMANO ofﬁces to obtain a hardcopy of the User's Manual.

•Please observe the appropriate rules and regulations of the country, state or region in

which you conduct your business as a dealer.

For safety, be sure to read this dealer’s manual thoroughly before use, and

follow it for correct use.

The following instructions must be observed at all times in order to prevent personal injury

and physical damage to equipment and surroundings.

The instructions are classiﬁed according to the degree of danger or damage which may occur

if the product is used incorrectly.

DANGER Failure to follow the instructions will result in death or serious

injury.

WARNING Failure to follow the instructions could result in death or

serious injury.

CAUTION Failure to follow the instructions could cause personal injury or

physical damage to equipment and surroundings.

TO ENSURE SAFETY

WARNING

• Be sure to follow the instructions provided in the owner's manual when installing the

product.

It is recommended to use SHIMANO genuine parts only. If parts such as bolts and nuts

become loose or damaged, the bicycle may suddenly fall over, which may cause serious

injury.

In addition, if adjustments are not carried out correctly, problems may occur, and the

bicycle may suddenly fall over, which may cause serious injury.

•Be sure to wear safety glasses or goggles to protect your eyes while performing

maintenance tasks such as replacing parts.

•After reading the dealer's manual thoroughly, keep it in a safe place for later reference.

Be sure to also inform users of the following:

•Be careful not to let the hemming of your clothes get caught in the chain while riding.

Otherwise, you may fall off the bicycle.

NOTICE

Be sure to also inform users of the following:

•If gear shifting operations cannot be carried out smoothly, clean the derailleur and

lubricate all moving parts.

•When the chain is in any of the positions shown in the ﬁgure, the chain may come into

contact with the front chainring or front derailleur and generate noise. If noise is a

problem, shift the rear sprocket to the next largest gear or the one after.

Double

Front chainring

Rear sprocket

TO ENSURE SAFETY

•Products are not guaranteed against natural wear and deterioration from normal use

and aging.

•For maximum performance we highly recommend SHIMANO lubricants and maintenance

products.

For Installation to the Bicycle, and Maintenance:

•Use an OT-SP sealed cable and cable guide for smooth operation.

•Grease the inner cable and the sliding portions of the outer casing before use to ensure

that they slide properly.

Do not let dust adhere to the inner cable. If the grease on the inner cable is wiped off,

the application of SIS SP41 grease (Y04180000) is recommended.

•If using a full outer model, the end of the

outer casing with the outer cap (resin type)

should be at the derailleur side.

•If using it in a cold region, use a sealed

outer cap (resin type) to prevent freezing.

Cap with long tongue

Outer cap (resin type)

Derailleur side

•If looseness in the links is so great that gear shifting adjustments cannot be made,

replace the derailleur.

The actual product may differ from the ﬁgure because this manual is intended

mainly to explain the procedures for using the product.

LIST OF TOOLS TO BE USED

The following tools are needed for installation, adjustment, and maintenance purposes.

Tool

2 mm hexagon wrench

4 mm hexagon wrench

5 mm hexagon wrench

Nippers

INSTALLATION/REMOVAL

Installing the front derailleur

INSTALLATION/REMOVAL

NOTICE

•With a carbon frame, even the recommended tightening torque may be too tight and

cause damage to the frame, or too loose and not sufﬁciently attached to the frame.

For the appropriate torque value, consult with the manufacturer of the completed

bicycle or the manufacturer of the frame.

Installing the front derailleur

Installing the backup plate

If installing the front derailleur to a brazed-on type frame, a backup plate must be attached to

the seat tube.

Be sure to install this in order to prevent damage to the frame from the pressure of the front

derailleur support bolt.

Tape

[1]

1. Check the installation location.

Check the position where the support bolt directly touches the frame when the support

bolt of the front derailleur is being adjusted.

INSTALLATION/REMOVAL

Installing the front derailleur

2. Install the backup plate.

Avoid positioning the tape that attaches the backup plate to the seat tube in the location

where the support bolt directly touches the frame.

Backup plate

Tape

Support bolt

INSTALLATION/REMOVAL

Installing the front derailleur

1. Adjust the installation height and temporarily attach the front

derailleur to the frame.

Adjust the installation height so that the distance from the tips of the teeth of the largest

chainring is 1 - 3 mm.

1 - 3 mm

Chain guide outer plate

Largest chainring

INSTALLATION/REMOVAL

Installing the front derailleur

2. Adjust the position of the chain guide.

Use the low adjustment bolt to align the front end of the chain guide outer plate with

the surface of the largest chainring.

At this point, adjust the chain guide so that its rear end is 0.5 - 1.0 mm inside.

Low adjustment bolt

Front end of chain guide outer

plate

Rear end of chain guide

0.5 - 1 mm

Largest chainring

3. Fix the front derailleur in place.

Mounting bolt

5 - 7 N·m

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Shimano Fahrradzubehör Handbücher

Shimano

Shimano FH-M775 Bedienungsanleitung

Shimano

Shimano SM-SH51 Bedienungsanleitung

Shimano

Shimano WH-M505 Betriebsanleitung

Shimano

Shimano BR-M8000 Bedienungsanleitung

Shimano

Shimano METREA SL-U5000 Bedienungsanleitung

Shimano

Shimano E6000 Series Bedienungsanleitung

Shimano

Shimano HP-NX10 Betriebsanleitung

Shimano

Shimano SL-BS79 Bedienungsanleitung

Shimano

Shimano RD-TX35 Betriebsanleitung

Shimano

Shimano EW-WU101 Bedienungsanleitung

Shimano

Shimano SW-RS801-S Bedienungsanleitung

Shimano

Shimano FC-M552 Betriebsanleitung

Shimano

Shimano RD-M410 Betriebsanleitung

Shimano

Shimano SM-BB80 Betriebsanleitung

Shimano

Shimano TIAGRA BR-4400 Betriebsanleitung

Shimano

Shimano E6100 Bedienungsanleitung

Shimano

Shimano Alfine SM-RT62 Betriebsanleitung

Shimano

Shimano Alfine CJ-8S20 Betriebsanleitung

Shimano

Shimano FlightDeck SC-7900 Betriebsanleitung

Shimano

Shimano FC-MT500-2 Bedienungsanleitung

Shimano

Shimano UM-07X0A-005 Bedienungsanleitung

Shimano

Shimano SM-EC79 Betriebsanleitung

Shimano

Shimano TIAGRA FD-4400 - TECHNICAL Betriebsanleitung

Shimano

Shimano SLX BR-M7000 Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken

Sigma

Sigma BC 16.16 Bedienungsanleitung

Playcore

Playcore Dero Setbacks Bedienungsanleitung

VDO Cyclecomputing

VDO Cyclecomputing x3dw Bedienungsanleitung

Cateye

Cateye RAPID X2 Bedienungsanleitung

buratti meccanica

buratti meccanica Clorofilla Trail Bedienungsanleitung

BOB

BOB YAK Bedienungsanleitung

APLIC

APLIC 303303/20190717TW012 Bedienungsanleitung

SRAM

SRAM AXS BlipBox Bedienungsanleitung

Garmin

Garmin EDGE 500 Bedienungsanleitung

Cateye

Cateye V2C - Gebrauchsanweisung

KMART

KMART 43115907 Bedienungsanleitung

SIGMA SPORT

SIGMA SPORT Buster 2000 Bedienungsanleitung

NVO Components

NVO Components STEM Bedienungsanleitung

DAXYS

DAXYS BP188 Bedienungsanleitung

XLC

XLC BV-W17 Bedienungsanleitung

Deda Elementi

Deda Elementi SUPERBOX Bedienungsanleitung

Akku Vision

Akku Vision e-bike vision 10046 Kurzanleitung

Squire

Squire Inigma Bedienungsanleitung