Shindaiwa HomePro 22DH series Bedienungsanleitung

22DH DOUBLE-SIDED

HEDGE TRIMMER

SHINDAIWA OWNER'S/

OPERATOR'S MANUAL

WARNING!

Minimize the risk of injury to yourself and others! Read this manual and

familiarize yourself with the contents. Always wear eye and hearing

protection when operating this unit.

Part Number 68126-94010 Revision 2/02

Introduction

The Shindaiwa 22DH series of hand

power tools has been designed and

built to deliver superior performance

and reliability without compromise to

quality, comfort, or durability.

Shindaiwa high performance

engines represent the leading edge of

2-cycle engine technology, delivering

exceptionally high power at remark-

able low displacement and weight. As

an owner/operator, you’ll soon

discover for yourself why Shindaiwa is

simply in a class by itself!

IMPORTANT!

The information contained in this

manual describes units available at

the time of publication.

While every attempt has been

made to give you the very latest

information about your Shindaiwa

product, there may be some differ-

ences between your 22DH series

machine and what is described here.

Shindaiwa Inc. reserves the right

to make changes to products without

prior notification, and without obliga-

tion to make alterations to units

previously manufactured.

WARNING!

The engine exhaust from this

product contains chemicals known

to the State of California to cause

cancer, birth defects or other

reproductive harm.

Introduction ......................................... 2

Attention Statements........................... 3

Safety Labels ........................................ 4

General Safety Instructions................ 5

Unit Description .................................. 8

Specifications ....................................... 9

Throttle Cable Adjustment............... 10

Mixing Fuel........................................ 11

Refueling ............................................ 11

Starting the Engine ........................... 12

Starting a Flooded Engine................ 14

Stopping the Engine.......................... 15

Idle Speed Adjustment...................... 15

Maintenance ...................................... 16

Muffler Maintenance ........................ 20

Cutter Blade Adjustment.................. 21

Long Term Storage ........................... 21

Troubleshooting Guide .................... 22

Emission System Warranty.............. 25

PAGE

Contents

Throughout this manual are special

“attention statements”.

WARNING!

A statement preceded by the

triangular attention symbol and the

word “WARNING” contains

information that should be acted

upon to prevent serious bodily

injury.

CAUTION!

A statement preceded by the word

“CAUTION” contains information

that should be acted upon to

prevent mechanical damage.

IMPORTANT!

A statement preceded by the word

“IMPORTANT” is one that possesses

special significance.

NOTE:

A statement preceded by the word

“NOTE” contains information that

is handy to know and may make

your job easier.

IMPORTANT!

The operational procedures de-

scribed in this manual are intended to

help you get the most from your

22DH hedge trimmer as well as to

protect you and others from harm.

These procedures are guidelines for

safe operation under most conditions,

and are not intended to replace any

safety rules and/or laws that may be

in force in your area. If you have

questions regarding your 22DH

hedge trimmer unit, or if you do not

understand something in this manual,

your Shindaiwa dealer will be glad to

assist you. You may also contact

Shindaiwa, Inc. at the address

printed on the back of this manual.

Attention Statements

Read and follow this Operator's

Manual. Failure to do so could

result in serious injury.

Always wear approved eye

and hearing protection at all

times during the operation of

this unit.

The blades are SHARP!

Handle with care.

Keep hands clear of the cutter

blades when starting the engine.

SAFETY

IMPORTANT!

Safety and Operation Information

Labels: Make sure all information

labels are undamaged and readable.

Immediately replace damaged or

missing information labels. New

labels are available from your local

authorized Shindaiwa dealer.

Safety Labels

Figure 1

SAFETY

Work Safely

Hedge trimmers operate at very high

speeds and can do serious damage or

injury if they are misused or abused.

Never allow a person without training or

instruction to operate your 22DH Hedge

Trimmer

WARNING!

Use Good Judgment

ALWAYS wear eye protection to

shield against thrown objects.

NEVER run the engine when

transporting the unit.

NEVER run the engine indoors!

Make sure there is always good

ventilation. Fumes from engine

exhaust can cause serious injury

or death.

ALWAYS clear your work area of

trash or hidden debris that could

be thrown back at you or toward a

bystander.

ALWAYS stop the unit immedi-

ately if it suddenly begins to

vibrate or shake. Inspect for

broken, missing or improperly

installed parts or cutters.

ALWAYS keep the unit as clean

as practical. Keep it free of loose

vegetation, mud, etc.

ALWAYS hold the unit firmly

with both hands when cutting or

trimming, and maintain control at

all times.

ALWAYS keep the handles clean.

ALWAYS disconnect the spark

plug wire before performing any

maintenance work.

NEVER use a cracked or broken

cutter or cutter bar; replace it

with a new or serviceable one.

NEVER attempt to adjust the

cutter with the engine running.

Stay Alert

You must be physically and mentally

fit to operate this unit safely.

General Safety Instructions

WARNING!

Never operate power equipment

of any kind if you are tired or if you

are under the influence of alcohol,

drugs, medication or any other

substance that could affect your

ability or judgement.

WARNING!

Minimize the Risk of Fire

NEVER smoke or light fires near

the hedge trimmer.

ALWAYS stop the engine and

allow it to cool before refueling.

Avoid overfilling and wipe off any

fuel that may have spilled.

ALWAYS move the unit to a place

well away from a fuel storage area

or other readily flammable

materials before starting the

engine.

NEVER place flammable material

close to the engine muffler.

NEVER run the engine without

the spark arrester screen in place.

Never make unauthorized

attachment installations. Never

use attachments not approved by

Shindaiwa for use on this unit.

22DH02

SAFETY

The Properly Equipped Operator

Always

operate with both

hands firmly gripping the

unit.

Wear close-fitting clothing to

protect legs and arms.

Gloves offer added

protection and are strongly

recommended. Do not wear

clothing or jewelry that could

get caught in machinery or

underbrush.

Secure hair so it is

above shoulder

level. NEVER

wear shorts!

Always

wear eye protection such

as goggles or safety glasses.

Wear appropriate footwear (non-skid boots or

shoes): do not wear open-toed shoes or sandals.

Never operate the unit while barefoot!

Keep a proper

footing and

do not

overreach.

Maintain

your balance at all

times during

operation.

Always

make sure the cutters

are correctly adjusted and in

good condition.

Figure 2

Always

wear hearing protection

such as earmuffs or earplugs.

22DH02

Be Aware of the Working Environment

Figure 3

Always

keep proper footing and do not overreach.

Maintain your balance at all times during operation.

Avoid long-term

operation in very hot or

very cold weather.

Never

operate this

unit if any safety

guards are missing or

damaged.

Make sure handgrips are free of foreign

substances such as lubricant and pitch.

Before moving to

another job site, stop

the engine and install

the blade cover.

Do not allow cutters to contact

buildings or other hard objects

during operation. If a cutter should

bind fast in a cut, stop the engine

immediately. Remove the cause of

the bind before proceeding.

Inspect the cutting site thoroughly prior to

operation. Remove objects that could get

entangled by the cutter blade. Note the

locations of fence posts and other fixed

objects and avoid cutting them.

Avoid cutting large or

extremely woody branches.

Doing so can shorten

cutter life, and damage the

gearcase.

Never

cut metal objects

or wire with the blade.

SAFETY

Unit Description

Figure 4

Front Handle

Safety Guard

Gearcase

Guide Bar

Cutter

Fuel Cap

Ignition Switch

Throttle

Lever

Scabbard

Air Cleaner

Cover

Fuel Tank

Choke

Front

Handle

Rear

Handle

Recoil

Starter

Throttle Lock

Button

Throttle

Lockout

Lever

Using Figure 4 as a guide, familiarize

yourself with this unit and its various

components. Understanding this unit

helps ensure top performance, long

service life, and safer operation.

WARNING!

Do not make unauthorized

modifications or alterations to this

unit or to any of its components or

accessories.

IMPORTANT!

The terms “left,” “left-hand,” and “LH”;

“right,” “right-hand,” and “RH”; “front”

and “rear” refer to directions as

viewed by the operator during normal

operation of this product.

DESCRIPTION

Specifications

Specifications subject to change without notice.

This hedge trimmer is supplied

fully assembled. Before proceed-

ing, inspect the unit to make sure

components are in place and that

fasteners are tight. Inspect for

broken, damaged or missing parts

or components.

Included with this unit should be:

䡵Owner's/Operator's manual.

䡵Tool set which includes a hex

wrench, screwdriver, and combina-

tion spark plug/13mm wrench.

䡵Blade scabbard.

Model....................................................................................................................22DH

Engine Model ..................................................................................................SDH220

Engine Type................................................. 2-cycle, horizontal cylinder, air cooled

Engine Bore x Stroke ......................................................................... 31mm x 28mm

Engine Displacement.......................................................................... 21.1cc/1.29 in3

Unit Weight (dry)................................................................................... 4.5kg/10.0 lb

Maximum Power ...............................................0.59kW/0.8 hp @ 7500 rpm (min-1)

Fuel/Oil Ratio .............................50:1 with Shindaiwa Premium 2-cycle mixing oil

Fuel Tank Capacity ...........................................................................0.4 liter/13.6 oz.

Carburetor.............................................Walbro WYL,diaphragm type, with primer

Ignition ........................................ One-piece, fully electronic, transistor controlled

Spark Plug .............................................................................................Champion CJ8

...................................................................For EMC compliance, use NGK BMR6A

Air Cleaner ...................................................................................................Foam type

Starting Method .........................................................................................Recoil type

Stopping Method......................................................... Slide switch, grounding type

Unit Dimensions.............(L x W x H) 985 x 240 x 214mm/38.8 x 9.4 x 8.4 inches

Blade Length.......................................................................................567mm/22.3 in.

Blade Type .................................Double-blade cutting action: double-edged blade

Clutch Type............................................................... 2-shoe, bonded with zinc body

Gear Type.................................................................................................... Spur gears

Gear Lube....................................................................................Lithium-base grease

EPA Emission Compliance Period*........................................................ Category B

*The EPA emission compliance period referred to on the emission compliance label located on the engine,

indicates the number of operating hours for which the engine has been shown to meet Federal emission

requirements. Category C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended)

22DH03

1. This hedge trimmer is supplied

fully assembled. To make sure the

unit operates correctly, check the

throttle lever:

—the throttle lever should operate

smoothly without binding.

—the throttle lever should have

about 1/4-inch (5-10mm) free play

when the engine is not running.

See Figure 5.

Throttle Cable Adjustment

Figure 5

1/4-in.

(5-10mm)

Free Play

Figure 6

Idle Throttle

Position Full

Throttle

Position

2. If free play adjustment is required,

loosen the two 10mm throttle cable

nuts at the throttle cable bracket.

3. Adjust the throttle cable nuts until

you achieve correct throttle free

play. See Figure 6.

4. When 1/4-inch (5-10mm) free play

is achieved, tighten the two 10mm

throttle cable nuts. When the

throttle cable is correctly adjusted,

and the throttle trigger is fully

depressed (full throttle position),

the throttle should contact the full

throttle stop. See Figure 7.

Figure 7

Throttle

Cable

Nuts

OPERATION

Full Throttle

Stop

Inhaltsverzeichnis

Andere Shindaiwa Trimmer Handbücher

Shindaiwa

Shindaiwa 81010 Betriebsanleitung

Shindaiwa

Shindaiwa C230 INTL Bedienungsanleitung

Shindaiwa

Shindaiwa AH262 Bedienungsanleitung

Shindaiwa

Shindaiwa T254 Betriebsanleitung

Shindaiwa

Shindaiwa PowerBroom PS344 Betriebsanleitung

Shindaiwa

Shindaiwa Speed-Feed 375 Einrichtungshandbuch

Shindaiwa

Shindaiwa Heavy-duty Fixed-line Head Bedienungsanleitung

Shindaiwa

Shindaiwa PB3410 POWERBROOM Betriebsanleitung

Shindaiwa

Shindaiwa AH230 Bedienungsanleitung

Shindaiwa

Shindaiwa T2500 Betriebsanleitung

Shindaiwa

Shindaiwa 80792 Bedienungsanleitung

Shindaiwa

Shindaiwa T-250 Bedienungsanleitung

Shindaiwa

Shindaiwa 78703 Betriebsanleitung

Shindaiwa

Shindaiwa 81601 Betriebsanleitung

Shindaiwa

Shindaiwa 68800-94313 Betriebsanleitung

Shindaiwa

Shindaiwa HT230 Betriebsanleitung

Shindaiwa

Shindaiwa T310Xs Bedienungsanleitung

Shindaiwa

Shindaiwa PS262 Bedienungsanleitung

Shindaiwa

Shindaiwa AH231 Betriebsanleitung

Shindaiwa

Shindaiwa C3410 Bedienungsanleitung

Shindaiwa

Shindaiwa T263XS Bedienungsanleitung

Shindaiwa

Shindaiwa T-20 Auto Bedienungsanleitung

Shindaiwa

Shindaiwa T235 Bedienungsanleitung

Shindaiwa

Shindaiwa BCK-12 Bedienungsanleitung

Beliebte Trimmer Handbücher anderer Marken

MTD

MTD HT 51 E Bedienungsanleitung

McCulloch

McCulloch T22 LS Bedienungsanleitung

COCKRAFT

COCKRAFT PRO HL36-S Bedienungsanleitung

Grizzly

Grizzly CT 1800 Li Bedienungsanleitung

Peco

Peco Z Trimmer ZT-3000 Bedienungsanleitung

Solo

Solo 116 Bedienungsanleitung

Stiga

Stiga ST 1200 Bedienungsanleitung

Echo

Echo GT-225 - 10-09 Bedienungsanleitung

RedMax

RedMax BT17 Bedienungsanleitung

Parkside

Parkside PHSL 900 A3 Bedienungsanleitung

Gardeo

Gardeo PRO GPTHT2560 Bedienungsanleitung

Park

Park DT-810870 Bedienungsanleitung

Worx

Worx WG209 Bedienungsanleitung

Gardenline

Gardenline 43671/HTKS26 Bedienungsanleitung

Makita

Makita 3710 Bedienungsanleitung

Champion

Champion 100683 Bedienungsanleitung

Stihl

Stihl FS 311 Bedienungsanleitung

Efco

Efco STARK 38 Handbuch