Show Tec SF-250 Bedienungsanleitung

SF-250 V1

Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands

Ordercode: 80375

MANUAL

ENGLISH

Ordercode: 80375

SF-250

Table of contents

Warning ...............................................................................................................................................................................2

Safety Instructions .........................................................................................................................................................2

Operating Determinations ..........................................................................................................................................3

Rigging ............................................................................................................................................................................4

Connection with the mains.........................................................................................................................................4

Return Procedure..........................................................................................................................................................5

Claims..............................................................................................................................................................................5

Description of the device.................................................................................................................................................6

Overview ........................................................................................................................................................................6

Installation...........................................................................................................................................................................7

Set Up and Operation .......................................................................................................................................................7

Maintenance......................................................................................................................................................................7

Troubleshooting .................................................................................................................................................................7

No Fan.............................................................................................................................................................................7

Product Specifications......................................................................................................................................................8

Ordercode: 80375

SF-250

Warning

Unpacking Instructions

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure

that all parts are present, and have been received in good condition. Notify the dealer immediately and

retain packing material for inspection if any parts appear damaged from shipping or the carton itself

shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be

returned to the factory, it is important that the fixture be returned in the original factory box and packing.

Your shipment includes:

•Showtec SF-250 with power cable (8,5 m)

•User manual

Safety Instructions

Every person involved with the installation, operation and maintenance of this device has to:

•be qualified

•follow the instructions of this manual

Before the initial start-up, please make sure that there is no damage caused by transportation.

Should there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to

follow the safety instructions and warning notes contained in this manual.

Please consider that damages caused by manual modifications to the device are not subject to

warranty. This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

Ordercode: 80375

SF-250

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of

this manual or any unauthorized modification to the device.

•Never let the power cord come into contact with other cables! Handle the power cord and all

connections with the mains with particular caution!

•Never remove warning or informative labels from the unit.

•Never use anything to cover the ground contact.

•Always hold the fixture by the transport handles.

•Never place any material over the fan.

•Never leave any cables lying around.

•Do not connect this device to a dimmerpack.

•Do not switch the device on and off in short intervals, as this will reduce the device’s life.

•Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).

•Do not use the fan if any part is damaged or missing.

•Do not touch the fan blades, while operating the device.

•Allow the fixture to cool for at least 5 minutes before handling.

•Do not shake the device. Avoid brute force when installing or operating the device.

•Only use the device indoors, avoid contact with water or other liquids.

•Only operate the device after having checked if the housing is firmly closed and all screws are tightly

fastened.

•Only operate the device after having familiarized with its functions.

•Avoid flames and do not put close to flammable liquids or gases.

•Always keep the case closed while operating.

•Always allow a free air space of at least 50 cm around the unit for ventilation.

•Always disconnect power from the mains, when device is not used or before cleaning! Only handle

the power cord holding it by the plug. Never pull out the plug by tugging the power cord.

•Make sure that the device is not exposed to extreme heat, moisture or dust.

•Make sure that the available voltage is not higher than stated on the rear panel.

•Make sure that the power cord is never crimped or damaged. Check the device and the power

cord from time to time.

•If the fan is obviously damaged, it has to be replaced.

•If device was dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

•If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not

switch it on immediately. The arising condensation water might damage your device. Leave the

device switched off until it has reached room temperature.

•If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Showtec dealer for service.

•For adult use only. The fixture must be installed beyond the reach of children. Never leave the unit

running unattended.

•Never attempt to bypass the thermostatic switch or fuses.

•The user is responsible for correct positioning and operating of the SF-250. The manufacturer will not

accept liability for damages caused by the misuse or incorrect installation of this device.

•This device falls under protection class I. Therefore it is essential to connect the yellow/green

conductor to earth.

•Repairs, servicing and electric connection must be carried out by a qualified technician.

•WARRANTY: Till one year after date of purchase.

Operating Determinations

•This device is not designed for permanent operation. Consistent operation breaks will ensure that the

device will serve you for a long time without defects.

•The maximum ambient temperature ta= 40°C must never be exceeded.

•The relative humidity must not exceed 50 % with an ambient temperature of 40° C.

•If this device is operated in any other way than the one described in this manual, the product may

suffer damages and the warranty becomes void.

•Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.

You endanger your own safety and the safety of others!

Ordercode: 80375

SF-250

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all

other safety issues.

Do not attempt the installation yourself!

Always let the installation be carried out by an authorized dealer!

The SF-250 can be placed on a flat stage floor.

Improper installation can cause serious injuries and/or damage of property!

Connection with the mains

Connect the device to the mains with the power-plug.

Always check if the right color cable is connected to the right place.

International

EU Cable

UK Cable

US Cable

BROWN

RED

YELLOW/COPPER

PHASE

BLUE

BLACK

SILVER

NEUTRAL

YELLOW/GREEN

GREEN

PROTECTIVE GROUND

Make sure that the device is always properly connected to the earth!

Improper installation can cause serious injuries and/or damage of property!

Ordercode: 80375

SF-250

Return Procedure

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.

Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned

without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.

Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.

Be prepared to provide the model number, serial number and a brief description of the cause for the

return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the

customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace

product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.

Note: If you are given an RMA number, please include the following information on a piece of paper

inside the box:

01) Your name

02) Your address

03) Your phone number

04) A brief description of the symptoms

Claims

The client has the obligation to check the delivered goods immediately upon delivery for any short-

comings and/or visible defects, or perform this check after our announcement that the goods are at their

disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be

reported to the carrier upon receipt of merchandise.

It is the customer's responsibility to report and submit claims with the shipper in the event that a fixture is

damaged due to shipping. Transportation damage has to be reported to us within one day after receipt

of the delivery.

Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with

a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless

agreed otherwise in writing.

Complaints against us must be prepared in writing or sent by fax within 10 working days after receipt of

the invoice. After this period complaints will not be handled anymore.

Complaints will only then be considered if the client has so far complied with all parts of the agreement,

regardless of the agreement from which the obligation is resulting.

Ordercode: 80375

SF-250

Description of the device

Features

The SF-250 is a professional high-power touring fan.

Input voltage: 220-240V, 50/60Hz

Power consumption: 700W

3-position speed control

Housing: Metal & flame retardant plastic

Connections: Schuko power cable (8,5 m)

Dimensions: 520 x 460 x 470 mm (LxWxH)

Weight: 15 kg

Overview

Fig. 01

01) Schuko power cable (8,5 m)

02) 3-position speed control

03) Air outlet

Ordercode: 80375

SF-250

Installation

Remove all packing materials from the SF-250. Check if all foam and plastic padding is removed.

Connect all cables.

Do not supply power before the whole system is set up and connected properly.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Set Up and Operation

Follow the directions below, as they pertain to your preferred operation mode.

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.

Connect the device to the main power supply.

01) Place the SF-250 on a flat stage floor.

02) Plug the Schuko cable into the appropriate 220-240V AC power supply.

03) Turn the speed control (02), in order to set the desired fan speed. The adjustment range is between 0

(OFF) and 1-3 (from slow to fast).

04) After use, turn the speed control (02) to 0, to switch the SF-250 off.

05) Unplug the Schuko cable.

Maintenance

The operator has to make sure that safety-related and machine-technical installations are to be

inspected by an expert after every year in the course of an acceptance test.

The operator has to make sure that safety-related and machine-technical installations are to be

inspected by a skilled person once a year.

The following points have to be considered during the inspection:

01) All screws used for installing the device or parts of the device have to be tightly connected and

must not be corroded.

02) There may not be any deformations on housings, fixations and installation spots.

03) Mechanically moving parts like axles, eyes and others may not show any traces of wearing.

04) The electric power supply cables must not show any damages or material fatigue.

The SF-250 requires almost no maintenance. However, you should keep the unit clean.

Otherwise, the device’s performance will be significantly reduced. Disconnect the mains power supply,

and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents.

Please clean internal components once a year with a light brush and vacuum cleaner.

Troubleshooting

This troubleshooting guide is meant to help solve simple problems.

If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit

operates properly, do not carry out following steps.

No Fan

If the fan does not operate properly, refer servicing to a technician.

Follow the steps below:

01) Power supply. Check if the unit is plugged into an appropriate power supply.

02) If you are unable to determine the cause of the problem, do not open the SF-250, as this may

damage the unit and the warranty will become void.

03) Return the device to your Showtec dealer.

Ordercode: 80375

SF-250

Product Specifications

Model:

Showtec SF-250

Input Voltage:

220-240V AC, 50/60Hz

Power consumption:

700W

Dimensions:

520 x 460 x 470 mm (LxWxH)

Weight:

15 kg

Electro-mechanical effects:

Speed control:

3-position speed control

Housing:

Metal & flame retardant plastic

Connections:

Schuko power cable (8,5 m)

Max. ambient temperature ta:

40°C

Max. housing temperature tB:

80°C

Minimum distance:

Minimum distance from flammable surfaces:

0,5 m

Design and product specifications are subject to change without prior notice.

Website: www.Showtec.info

Email: [email protected]

Ordercode: 80375

SF-250

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Show Tec DJ-Equipment Handbücher

Show Tec

Show Tec Astro 360 XL Bedienungsanleitung

Show Tec

Show Tec City Painter 575 Bedienungsanleitung

Show Tec

Show Tec Spectral M800 Q4 Tour Bedienungsanleitung

Show Tec

Show Tec Performer 2000 Fresnel DDT MKII V1 Bedienungsanleitung

Show Tec

Show Tec LED Versatrack Bedienungsanleitung

Show Tec

Show Tec Dynamic LED V4 Bedienungsanleitung

Show Tec

Show Tec Eventspot 1900 MKII Bedienungsanleitung

Show Tec

Show Tec LED Par 36 DMX Bedienungsanleitung

Show Tec

Show Tec Spectral PC 400Z IP65 V2 Bedienungsanleitung

Show Tec

Show Tec QUATRO 50462 Bedienungsanleitung

Show Tec

Show Tec Performer 2000 RGBAL V1 Bedienungsanleitung

Show Tec

Show Tec Pixel Square 25 COB Bedienungsanleitung

Show Tec

Show Tec 42486 Bedienungsanleitung

Show Tec

Show Tec Performer Pendant Q6 V3 Bedienungsanleitung

Show Tec

Show Tec PAR 46 Warm-On-Dim V1 Bedienungsanleitung

Show Tec

Show Tec Illumilift RGBW Turbo Bedienungsanleitung

Show Tec

Show Tec 43552 Bedienungsanleitung

Show Tec

Show Tec LED Sphere Direct Control 100 V2 Bedienungsanleitung

Show Tec

Show Tec Lightset PRO 9/10 RGBM Bedienungsanleitung

Show Tec

Show Tec Phantom 3R Beam V1 Bedienungsanleitung

Show Tec

Show Tec StageBeam 300/500W Fresnel V2 Bedienungsanleitung

Show Tec

Show Tec Pixelbar 16 Q6 Bedienungsanleitung

Show Tec

Show Tec Performer Profile Mini MKII 5600K V1 Bedienungsanleitung

Show Tec

Show Tec Cameleon Flood 6 Q4 Tour Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung