Showerbuddy SB3T Bedienungsanleitung
elimination through innovation
SB3T
Owners Manual
INTENDED USAGE:
The Showerbuddy shower/commode chair is a medical device indicated for use by
persons with limited mobility who are unable to stand, walk and/or seat independently.
The device is specifically designed for individuals who require additional support and
stability during washing, toileting and other hygienic activities. It is a class 1 medical
device, which is intended to be used only as a seating option for toilet issues,
showering and bathing. Its purpose is to help physically handicapped people during
their hygienic activities. Any other use is prohibited.
INDICATIONS:
The device is specifically indicated for individuals who (because of the wide variety
of possible health problems) are unable to stand and /or walk and so they need an
assistance device to maintain some or all daily hygienic tasks.
CONTRADICTIONS:
This type of device must not be used by a disabled person alone. The user should
always be accompanied by a caregiver or assistance person. The device is not
recommended for persons with flaccid paralysis or other diseases that cause
serious body control problems. Such persons require special wheelchairs designed
for extra stability and support of the user’s body. The need for this type of specialty
wheelchair should be always estimated and indicated by a physician or a physical
therapist.
WARNING – Included in this packaging and fitted to the Showerbuddy chair are
small parts, plastic wrap and polystyrene packing that could be dangerous to
children under 5.
Keep children away from this device and do not let them play with any parts.
contents
page 2
Exploded Parts ............................................................... 3
Parts List ........................................................................ 4
Roll-InBuddy + Tilt Assembly .......................................... 5
Roll-InBuddy + Tilt Operation .......................................... 12
Strut Adjustment ............................................................ 17
Cleaning + Maintenance ................................................. 20
Safety Instructions ......................................................... 21
Warranty Information ...................................................... 24
Registration Form ........................................................... 26
Showerbuddy SB3T
exploded parts
page 3 Showerbuddy SB3T
1
90
500-254
500-268
25
69
12
500-259
500-268
500-253 96
81
3
32
39
27
38
37
34
36 35
33
41
76
40A
28
94
80
93
31
95
500-267
500-266
30
75
73
71
70
42
74
72
23
73 A
A
A
A
parts list
Showerbuddy SB3T page 4
15” Castor Wheel
3Tube Cap (25mm)
Leg Tube Cap
12
Tube Washer (25mm)23
Securing Clip (Large)25
Arm Rest Clip27
Cushion Connector28
Cushion30
Commode Bucket Connectors31
Commode Bucket + Lid32
33 Arm Rest (Left)
34 Arm Rest (Right)
Arm Rest Padding (Right)
35 Arm Rest Padding (Left)
36
37 Arm Rest Lock
See the exploded chair image for the location of parts.
Arm Rest Cap38
Arm Rest Knob39
Back Rest Frame
40A
Back Rest Fabric41
Hand Grips42
69 Rolling Base Legs
70 Neck Rest
71 Neck Rest Height Adjustment Tube
Neck Rest Attachment
72
Neck Rest Sleeve73
Neck Rest Handle74
Tilt Handle75
Strut Cable76
Rubber Stopper80
Tilt Stopper81
Calf Strap90
Seat Base93
Strut (Left)94
Strut (Right)95
Height Adjustment Tube96
A
A
A
A
500-268 Footrest Adjust Knob
500-268 Footrest Adjust Knob
500-253 LH Leg Assembly
500-254 RH Leg Assembly
500-266 LH Foot Tray
500-267 RH Foot Tray
500-259 Leg Tube
Insert the arm rests into the sockets on
the seat base until the clip pin clicks and
locates the arm rests in position.
Screw the arm rest knob into the arm rest
to firmly secure the arm rest in position.
Swing the arm rest forward so that it locks
into position in the arm rest clip.
Slide the arm rest lock over the arm rest
clip to lock the arm rest in position.
step 2
Showerbuddy SB3Tpage 5
step 1 assembly
Insert the back rest frame into the seat
base.
Slide the back rest frame into the seat
base until the clip pins click into the holes
on the seat base.
The clip pins secure the chair back frame
in position.
NOTE
- To remove the seat back press the clip
pins in and slide the seat back out of the
seat base.
step 4
Showerbuddy SB3T page 6
step 3
By sliding the armrest lock you can easily
swing the armrest out of the way or
secure the armrest in position.
To unlock the armrest slide the armrest
lock away from the armrest.
To lock the armrest slide the armrest lock
towards the armrest.
NOTE
- The armrest locks should always be used
when the armrests aren’t in the swing-
away position.
The armrests can be easily swung-away
when required.
Unlock the armrest by sliding the armrest
lock away from the armrest. Once this is
done the armrest can be swung away. The
clip pin which secures the armrest in
position stops the armrest from rotating
to far.
NOTE
- The armrest locks should always be used
when the armrests aren’t in the
swing-away position.
step 6
Showerbuddy SB3Tpage 7
step 5
Ensuring the correct orientation attach
the seat cushion to the seat base by
pushing the 4 locating lugs on the
underside of the cushion into the
connectors on the seat base.
Firmly press the cushion into position
so that the 4 locating lugs are securely
located in the connectors.
NOTE
- To remove the cushion, carefully remove
one lug at a time from the connectors until
all 4 locating lugs are removed.
Slide the neck rest height adjustment tube
into the neck rest attachment. Adjust to
the required height and secure in the
correct position.
By screwing the neck rest handle in a
clockwise direction the neck rest
attachment will tighten and secure the
neck rest height adjustment tube in
position.
step 8
Showerbuddy SB3T page 8
step 7
To attach the neck rest, insert the plastic
sleeve into the neck rest height
adjustment tube.
Insert the neck rest into the sleeve on the
neck rest height adjustment tube. Adjust
to the required length and secure in the
correct position. By screwing the neck
rest handle in a clockwise direction the
neck rest height adjustment tube
connector will tighten and secure the
neck rest in position.
NOTE
- The neck rest should always be used and
adjusted to suit the specific user.
Insert the footrests as shown by simply
dropping each leg into the tube holder.
Make sure each leg is fully located in the slot
at the rear to prevent the leg from roating.
To rotated the leg simply lift and rotate out
of the way.
step 10
Showerbuddy SB3Tpage 9
step 9
To swing the footrest out of the way simply
lift the leg out of the slot and spin the leg
away.
WARNING
DO NOT STAND ON FOOTRESTS
Chair will be unstable and tip forward
if body-weight is applied to footrests
After unlocking the footrests rotate the
footrests outwards to allow easy access
to the chair.
When required rotate the footrests
inwards to reposition the footrests.
Andere Handbücher für SB3T
2
Inhaltsverzeichnis
Andere Showerbuddy Mobilitätshilfe Handbücher
Beliebte Mobilitätshilfe Handbücher anderer Marken
Rhythm Healthcare
Rhythm Healthcare B3800F Bedienungsanleitung
AMF-BRUNS
AMF-BRUNS PROTEKTOR Bedienungsanleitung
Drive DeVilbiss Healthcare
Drive DeVilbiss Healthcare OTTER Bedienungsanleitung
Rhythm Healthcare
Rhythm Healthcare C500U Bedienungsanleitung
Lumex
Lumex RJ4200A Bedienungsanleitung
Rebotec
Rebotec Jumbo Bedienungsanleitung