Shure UA844+ Series Bedienungsanleitung

UA844plus SWB

Antenna Distribution System

The Shure UA844SWB antenna distribution system user guide.

Version: 4 (2019-H)

Shure Incorporated

2/7

Table of Contents

UA844plus SWBAntenna Distribution System 3

General Description 3

Model Variations 3

Accessories 3

System Components 3

Optional Accessories 3

Specifications 4

FRONT AND REAR PANELS 5

Connecting Multiple UA844 Systems 6

Certifications 6

Important Product Information 7

LICENSING INFORMATION 7

Shure Incorporated

3/7

•

UA844plus SWB

Antenna Distribution System

General Description

The Shure Model UA844+ is an antenna distribution system that allows for the expansion of wireless microphone systems by

splitting one pair of antennas to multiple receivers. It also amplifies RF signals to compensate for insertion loss that results

from splitting signal power to multiple outputs. A single UA844+ system can support up to five wireless receivers. A maximum

of five UA844+ systems may be used in a two-tiered configuration.

Model Variations

UA844+ Model Variations

UA844+V 174-216 MHz

UA844+SWB 470-960 MHz

UA844+Z16 1240-1260 MHz

UA844+Z17 1492-1525 MHz

UA844+Z18 1785-1805 MHz

Note: Some units include a power switch on the front panel to meet regional regulations.

Accessories

System Components

Front-mounting antenna hardware

Rack-mounting hardware

External power supply

(2) 6 ft. BNC cables

(4) Non-locking DC power cords (QLXD4, SLX4, BLX4R)

(10) 22 in. BNC cables*

(4) Locking DC power cords** (ULXD4)

*Model UA844+/LC substitutes (2) 22 in. BNC cables.

**Not included with Model UA844+/LC

Optional Accessories

1/2 Wave Omnidirectional Receiver Antenna for improved wireless signal reception UA8

Shure Incorporated

4/7

In-Line RF Amplifier compensates for signal loss over extended cable runs UA834

UA874 Active Directional Antenna for improved wireless signal reception with

greater rejection of unwanted signals UA874

1/2 Wave Antenna Remote Mount Kit UA505

Antenna Rack Panel with Cables and BNC Adapters UA440

Note: Be sure to select antennas and accessories that are compatible with the operating frequency range of your wireless system. Contact Shure or your local

retailer for help with selecting the right wireless accessories.

Selecting Antenna Cables

Use 50 ohm low-loss coaxial cable, such as RG-8U. Shure offers pre-terminated antenna cables ranging from 6 to 100 feet.

NOTE: When ordering cables from Shure, select the low-loss "Z" models (available for longer cables) when using frequency bands above 1000 MHz.

Specifications

Power Requirements

14 to 18 VDC

DC Output

14 to 18 VDC (x4)

Output Current

Combined total from all DC outputs

2.5 A, maximum

Operating Temperature Range

-18°C (0°F) to 63°C (145°F)

Dimensions

45 x 483 x 172 mm (H x W x D)

Net Weight

1.62 kg (3.6 lbs)

Connector Type

BNC

RF Frequency Range

model dependent

174 to 1805MHz

Bias Voltage

15VDC (150 mA, maximum) (x2)

Shure Incorporated

5/7

Impedance

50 Ω

RF Frequency Range

model dependent

174 to 1805MHz

Output Intercept Point

21dBm, typical

Connector Type

BNC

Impedance

50Ω

Output Connector Isolation

30dB, typical

Gain

Input to any output port (Unused ports terminated in 50 Ω)

-1 to +1dB

FRONT AND REAR PANELS

①Antenna A Connector

②Power Indicator

③Power Switch(country dependent)

④Antenna B Connector

⑤15 V dc (2.54 A) power input

⑥Power Output for receivers. Do not connect to additional distribution systems

⑦RF Input Antenna B

⑧Cascade (2)

⑨RF Output B

⑩RF Output A

⑪RF Input Antenna A

Shure Incorporated

6/7

INSTALLATION

CABLE CONNECTIONS (ONE UA844)

Connecting Multiple UA844 Systems

①Connect additional systems to the A/B ports of the top level UA844.

②Connect additional systems on the second level to the A and B antenna inputs.

③Connect each receiver (RX) to the A/B output port pairs on the UA844.

Rear panel connections for each level of RF and power distribution

Certifications

The CE Declaration of Conformity can be obtained from Shure Incorporated or any of its European representatives. For contact

information please visit www.shure.com

The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: +49-7262-92 49 0

Shure Incorporated

7/7

Fax: +49-7262-92 49 11 4

Email: [email protected]

Important Product Information

LICENSING INFORMATION

Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for

possible requirements. Changes or modifications not expressly approved by Shure Incorporated could void your authority to

operatetheequipment.LicensingofShurewirelessmicrophoneequipmentistheuser’sresponsibility,andlicensabilityde

pendsontheuser’sclassificationandapplication,andontheselectedfrequency.Shurestronglyurgestheusertocontactthe

appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.

NOTE: This Radio equipment is intended for use in musical professional entertainment and similar applications. This Radio apparatus may be capable of oper

ating on some frequencies not authorized in your region. Please contact your national authority to obtain information on authorized frequencies and RF power

levels for wireless microphone products.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Shure Verstärker Handbücher