Shure Sound Isolating SE846 Bedienungsanleitung

1/7

SE846 -- Sound Isolating™ Earphones

Sound Isolating™ Earphones

Shure Sound Isolating™ Earphones, built with balanced armature speakers, deliver a detailed soundstage free

from outside noise. The powerful and stylish Shure SE earphones come with a detachable cable, adapters, a

durable carrying case, and interchangeable Sound Isolating sleeves for a comfortable and personalized fit.

Choosing a Sleeve

Select an earphone sleeve that provides the best fit and sound isolation. It should be easy to insert, fit comfortably,

and easy to remove.

Soft Flex Sleeves: In small, medium, and large sizes. Made from pliable rubber.

Soft Foam Sleeves: Compress the foam sleeve between your fingers and insert into the

ear canal. Hold in place for about ten seconds while the foam expands.

Triple-Flange Sleeves: If desired, use scissors to trim the stem on the sleeve.

Wearing the Earphones

Wear them like earplugs. A good acoustic seal provides maximum bass.

1. Select a sleeve.

2. Twist and pull to remove. Push new sleeve on fully. Compress foam sleeve slightly.

3. Insert firmly into ear. Wear cable over and behind ear. Tighten the cable and take up slack by raising the cable

cinch.

Important: If there seems to be a lack of low frequency response (bass), this means that the earphone sleeve is

not forming a tight seal. Gently push the earphone deeper into the ear canal or try a different sleeve.

Warning: Do not push the earphone sleeve beyond the ear canal opening.

Wearing the cable over the ear and securing it behind the head can help keep the earphones in place during phys-

ical activity.

Shure Incorporated

2/7

Changing Sleeves

•Twist and pull to remove the sleeve from the nozzle.

•Slide on a new sleeve so that it completely covers the barb and the nozzle.

Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they

do not tightly grip the nozzle. To ensure proper fit and performance, use only sleeves supplied by Shure (unless

using custom molded sleeves).

Removing the Earphones

Grasp the body of earphone and gently twist to remove.

Note: Do not pull on cable to remove earphone.

Detachable Cable

You may need to detach the cable from the earphones to attach optional components or to replace the cable if it

becomes damaged. To prevent accidental separation, the connector has a snug fit. Take special care to prevent

damage to the earphone and connector.

•Do not use pliers or other tools.

•Grasp the connector and the earphone as close as possible to where they join.

• Pull straight apart—do not twist. Cable is a snap fit, not threaded.

Note: If you pull at an angle, the connector will not detach.

•Do not pull on the cable or put any pressure on the earphone nozzle.

Shure Incorporated

3/7

•Listen for a click when connecting.

•When reattaching the cable, match the "L" and "R" markings. For clear cables and earphones, match the color

dots (Red=Right, Blue=Left).

Maintenance and Cleaning

Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product

safety.

•Keep the earphones and sleeves as clean and dry as possible.

•To clean sleeves, remove them from earphones, gently rinse in warm water and air dry. Foam sleeves require a

longer drying time. Inspect for damage and replace if necessary. Ear sleeves must be completely dry before

reusing.

• Wipe the earphones and sleeves with mild antiseptic to avoid infections. Do not use alcohol-based disinfec-

tants.

•Do not expose earphones to extreme temperatures.

•Replace sleeves if they do not fit properly.

•Do not attempt to modify this product. Doing so will void the warranty and could result in personal injury and/or

product failure.

Cleaning the Nozzle

If you notice a change in sound quality, remove the sleeve and check the nozzle of your earphone. If nozzle is

blocked, clear obstructions.

If no obstruction is found or if sound quality does not improve, replace the sleeve with a new sleeve or disassem-

ble the nozzle to clean inside.

Caution: When cleaning, do not force any object through the earphone nozzle! This will damage the earphone

sound filter.

Shure Incorporated

4/7

Interchangeable Nozzle Insert

Three varieties of nozzle insert provide customizable frequency responses for a personalized listening experience.

Use these instructions to replace or clean the nozzle insert.

Nozzle Inserts

Color Sound Signature Response

Blue Balanced Neutral (as shipped)

White Bright +2.5 dB, 1 kHz to 8 kHz

Black Warm −2.5 dB, 1 kHz to 8 kHz

Removing the Nozzle

Note: The nozzle contains small parts. Choose a proper work surface before disassembly.

1. Place the nozzle key (included with earphones) over the nozzle.

2. Turn the key counter-clockwise to loosen and remove the threaded collar.

3. Pull gently on the nozzle with your fingers to remove.

4. Using your fingers only, grasp the end of the nozzle insert and gently slide it out.

Caution: Do not use any tools or your teeth as this could cause damage to the nozzle insert.

Shure Incorporated

5/7

Reassembling the Nozzle

1. Gently slide the insert into the nozzle.

Important: The insert needs to be fully seated. Reposition until it slides in easily. Do not force.

2. Insert the nozzle into the earphone, aligning the dots so it matches the keyed opening.

3. Place the threaded collar over the nozzle. After ensuring the threads are properly engaged, use the nozzle key

to gently turn clockwise.

Caution: There should be no resistance to turning the collar until fully threaded into the housing. Check the fol-

lowing:

◦The insert is fully seated in the nozzle.

◦The nozzle is properly seated in the housing (dots aligned).

4. Once you are certain that the nozzle is properly seated and the collar threaded all the way into the earphone

housing, use the key to tighten the collar just enough to ensure it will not loosen during normal earphone us-

age.

Shure Incorporated

6/7

Airline Adapter

The airline adapter accessory is a dual-mono adapter plug for compatibility with the in-seat entertainment systems

on certain international airlines.

Specifications

Frequency Range

15 Hz –20 kHz

Sensitivity

at 1 kHz

114 dB SPL/mW

Impedance

at 1 kHz

9 Ω

Noise Attenuation

up to37 dB

Included Accessories

•Fit Kit with assorted sleeves

•Zippered carrying case

•64-inch detachable cable

Shure Incorporated

7/7

•Airline adapter

•¼-inch (6.3 mm) adapter

•Cable clip

•Nozzle removal key

•Nozzle inserts for custom frequency response

For optional accessories, visit www.shure.com.

Certifications

This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.

The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: +49-7262-92 49 0

Fax: +49-7262-92 49 11 4

Email: [email protected]

Andere Handbücher für Sound Isolating SE846

Inhaltsverzeichnis

Andere Shure Kopfhörer Handbücher

Shure

Shure SE315 Bedienungsanleitung

Shure

Shure E500 Bedienungsanleitung

Shure

Shure Sound Isolating SE112-GR Bedienungsanleitung

Shure

Shure Sound Isolating SE846 Bedienungsanleitung

Shure

Shure Computer Headset Bedienungsanleitung

Shure

Shure E3c Bedienungsanleitung

Shure

Shure SRH440A Bedienungsanleitung

Shure

Shure Sound Isolating SE535 Bedienungsanleitung

Shure

Shure SRH1840 Bedienungsanleitung

Shure

Shure i4c-t Bedienungsanleitung

Shure

Shure Sound Isolating SE846 Bedienungsanleitung

Shure

Shure RMCE-BT1 Bedienungsanleitung

Shure

Shure Sound Isolating SE215 Bedienungsanleitung

Shure

Shure SRH1540 Bedienungsanleitung

Shure

Shure SE215m+ Special Edition Bedienungsanleitung

Shure

Shure Sound Isolating SE535 Bedienungsanleitung

Shure

Shure SRH1540 Bedienungsanleitung

Shure

Shure RMCE-TW1 Bedienungsanleitung

Shure

Shure Aonic 5 Bedienungsanleitung

Shure

Shure SRH940 Bedienungsanleitung

Shure

Shure Sound Isolating SE846 Bedienungsanleitung

Shure

Shure I3C Bedienungsanleitung

Shure

Shure SCL5 Bedienungsanleitung

Shure

Shure Sound Isolating SE846 Bedienungsanleitung

Beliebte Kopfhörer Handbücher anderer Marken

Sony

Sony MDR-NC8 Bedienungsanleitung

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

Sony

Sony MDR-ED12LP Bedienungsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung