Shure 561 Bedienungsanleitung

General Description

The Shure Model 561 is an omnidirectional, low-impedance dynamic micro-

phone designed for use on a stand or flexible gooseneck. Its smooth frequen-

cy response is tailored for optimum speech intelligibility, making it ideal for

language labs, paging applications, and base station communications. The

561 is also suitable for use as a talk-back or cuing microphone in TV, film,

and recording studios.

Features

• Frequency response tailored for speech applications, with bass rolloff

and mid-range "presence" rise

• Omnidirectional pickup pattern

• Low impedance; long lengths of cable can be used without affecting mi-

crophone response or level

• Shock-mounted cartridge for reduced stand and handling noise

• Rugged die-cast aluminum construction

• Lockable stainless steel mesh grille

• Optional gooseneck and mounting flange

Gooseneck Mounting and Installation

1. If necessary, drill a hole approximately 7 mm (1/4 in) in diameter through

the mounting surface.

2. Place the flange over the hole in the mounting surface and secure it with

three screws.

3. Thread the supplied hexnut all the way down on the flange.

4. Thread the gooseneck tightly onto the flange. Back the hexnut up against

the gooseneck. Use a wrench to tighten the nut firmly against the bottom

of the gooseneck.

5. Slide the cable all the way through the gooseneck.

6. Thread the microphone firmly onto the gooseneck.

7. Connect the cable wires to the amplifier, mixer, or radio transmitter via

screw terminals, an XLR connector, or a 1/4-inch phone plug.

8. Lock the microphone in place by tightening the setscrew over the

mounting threads. The setscrew in the nameplate can be tightened to

secure the grille.

Use Shure A95 Line Matching Transformers to match a low impedance (300

ohm) microphone line to a high impedance amplifier or mixer input. The A95

is available with various input/output connectors.

Connector Wiring

The 561 may be wired for either balanced or unbalanced operation.

For balanced operation, the WHITE wire is connected to the positive audio input, the BLACK wire is connected to the negative audio input, and the SHIELD is

connected to chassis ground.

For unbalanced operation, the WHITE wire is connected to the audio input, the BLACK wire is connected to audio ground, and the SHIELD is connected to

chassis ground.

Cartridge Cable

White

Black

Shield

Coded Terminal

Internal Connections

Model 561

Omnidirectional Dynamic Microphone

1/4 inch Phone PlugXLR ConnectorFunctionWire ColorInput Type

TipPIN 2Audio +White

Balanced RingPIN 3Audio -Black

SleevePIN 1Chassis GroundShield

Tip--AudioWhite

Unbalanced Sleeve--Audio GroundBlack

Sleeve--Chassis GroundShield

Specifications

Type

Dynamic (moving coil)

Frequency Response

40 to 10,000 Hz

Polar Pattern

Omnidirectional

Impedance

200 Ω

Output Clipping Level

at 1 kHz, open circuit voltage

-57.5 dBV/Pa (1.33 mV) [1]

Polarity

Positive pressure on diaphragm produces positive voltage on white conductor

with respect to black conductor

Cable

1.2 m (4 ft) two-conductor shielded, unterminated561

XXXXERROR: [[ 5 m (16.34 ft) two-conductor shielded ]]

DOES NOT EXISTXXXX, unterminated

561-5M

Stand Thread

XXXXERROR: [[ Suitable for mounting on stand or gooseneck with 5/8-27

thread ]] DOES NOT EXISTXXXX

Case

Silver and black aluminum with stainless steel grille

Net Weight

142 g (5.0 oz.)

Packaged Weight

255 g (9.0 oz.)

Architect's Specification

The microphone shall be a moving coil (dynamic) type with a frequency re-

sponse of 40 to 10,000 Hz. It shall have an omnidirectional polar character-

istic and a low impedance rated at 150 Ohms for connection to inputs rated

19 to 300 Ohms. The microphone output level shall be –57.5 dBV/Pa. It shall

be equipped with a non-detachable 1.2 m (4 ft.) cable (561), or a non-detach-

able 5 m (16.34 ft.) cable (561-5M). The microphone shall be threaded for

mounting on a stand or gooseneck with a 5/8"–27 thread. The overall dimen-

sions of the microphone shall be 67.1 mm (2–21/32 in.) in length and 34.5

mm (1–3/8 in.) in diameter. The microphone shall be the Shure Model 561

or equivalent.

67.1 mm

(2–21/32 in.)

34.5 mm DIA.

(1–3/8 in.)

5/8 in.–27 thread

Nameplate

#4–40 Allen setscrews

Dimensions

20 200001000 1000050 100

9 8 7 6 5 4 3 2

9 8 7

6 5 4 3 2

+10

–10

B d

Frequency Response

Accessories

0[1] 1 Pa = 94 dB SPL

Shure IncorporatedModel 561 Omnidirectional Dynamic Microphone

2017/11/022/3

Furnished Accessories

80A67Allen wrench (No. 4)

Optional Accessories

G-1818" Gooseneck, Chrome

G18A18" Gooseneck-Side Vent, Chrome

G-1212" Gooseneck, Chrome

G6A6" Gooseneck-Side Vent, Chrome

A12Mounting Flange, Matte Silver

A13HDMounting Flange, Heavy Duty, Matte Silver

Replacement Parts

RK85GGrille for 561

Certifications

This product meets the Essential Requirements of all relevant European di-

rectives and is eligible for CE marking.

The CE Declaration of Conformity can be obtained from:

www.shure.com/europe/compliance

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: +49-7262-92 49 0

Fax: +49-7262-92 49 11 4

Email: [email protected]

Shure IncorporatedModel 561 Omnidirectional Dynamic Microphone

3/3

Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: +1-847-600-2000 Email:info@shure.com

Inhaltsverzeichnis

Andere Shure Mikrofon Handbücher

Shure

Shure Conference Phone Bedienungsanleitung

Shure

Shure 556s Bedienungsanleitung

Shure

Shure Microflex MX300 series Bedienungsanleitung

Shure

Shure MV5C Bedienungsanleitung

Shure

Shure ROSWELLITE KSM313 Bedienungsanleitung

Shure

Shure 527C Bedienungsanleitung

Shure

Shure 520DX Bedienungsanleitung

Shure

Shure PE65 Series Bedienungsanleitung

Shure

Shure PGA 98D Bedienungsanleitung

Shure

Shure MV88+ Bedienungsanleitung

Shure

Shure SM33 Gebrauchsanweisung

Shure

Shure KSM44 Bedienungsanleitung

Shure

Shure SM35 Bedienungsanleitung

Shure

Shure 588SA Bedienungsanleitung

Shure

Shure Sonobar 577A Bedienungsanleitung

Shure

Shure SM7B Bedienungsanleitung

Shure

Shure 16A Bedienungsanleitung

Shure

Shure Microflex MX392 Bedienungsanleitung

Shure

Shure 545SD-LC Classic Unidyne Bedienungsanleitung

Shure

Shure UNISPHERE 565SD Bedienungsanleitung

Shure

Shure CVB Bedienerhandbuch

Shure

Shure PGA 98H Bedienungsanleitung

Shure

Shure Beta 53 Bedienungsanleitung

Shure

Shure SM27-SC Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

JLab

JLab GO TALK Bedienungsanleitung

Renkforce

Renkforce TY-109 Bedienungsanleitung

Trust

Trust 31008 Bedienungsanleitung