Shure BETA 53-54 Bedienungsanleitung
© 2015 Shure Incorporated
27A28418 (Rev. 1)
WIRED MICROPHONE
BETA 53-54
USER GUIDE
Le Guide de l’Utilisateur
Guia del Usuario
Guida dell’Utente
Руководство пользователя
Bedienungsanleitung
日本語
繁體中文
Manual do Usuário
사용자 가이드
Printed in U.S.A.
2
Headworn Vocal Microphones
General Description
Shure models BETA53 and BETA54 are subminiature, electret condenser headworn microphones. They provide uncompromised sound quality and reliability
with minimal visibility in applications such as broadcast, theater, and touring. Despite their small size, each microphone’s condenser element delivers full,
clear, and natural reproduction of speech and vocals. The microphone features a durable, low-profile wire frame headband which is fully adjustable for stabil-
ity and comfort. A plastic carrying case protects the microphone and its accessories.
BETA53 Features
• Omnidirectional polar pattern for minimal handling noise and flexible
microphone placement
• Extended, flat frequency response provides accurate speech and vocal
reproduction
• Two interchangeable protective caps for response shaping
• Foam windscreens minimize breath noise and “popping”
• Available with an in-line preamp or with a TA4F connector for wireless
applications
• Choice of black or tan finish to suit your performance environment
BETA54 Features
• Supercardioid polar pattern provides maximum gain-before-feedback and
ambient rejection
• Extended frequency response tailored for vocal performances
• Able to handle extremely high sound pressure levels (SPL)
• Snap-fit foam windscreens stay in place during intensive movement
• Available with an in-line preamp or with a TA4F connector for wireless
applications
• Choice of black or tan finish to suit your performance environment
3
Available Models
Beta53 Models
• Omnidirectional
• For broadcast and stage
• Black finish
• Detachable in-line preamp for
wired applications
• Requires phantom power
Wireless Models
These models are for use with Shure wireless microphone systems. TA4F
connector attaches to wireless bodypacks (in-line preamp not included).
• WBH53B (black)
• WBH53T (tan)
Accessories
All models include:
Microphone and headband 1 each
Foam windscreens 2
Standard protective cap 2
Filtered protective cap 2
Swiveling lapel clip 1
Boom holder 2
Logo pad 1
Plastic carrying case 1
Beta54 Models
• Supercardioid
• For stage and vocal performance
• Black finish
• Detachable in-line preamp for
wired applications
• Requires phantom power
Wireless Models
These models are for use with Shure wireless microphone systems. TA4F
connector attaches to wireless bodypacks (in-line preamp not included).
• WBH54B (black)
• WBH54T (tan)
Accessories
All models include:
Microphone and headband 1 each
Snap-fit foam windscreens 2
Standard protective cap 2
Swiveling lapel clip 1
Boom holder 2
Logo pad 1
Plastic carrying case 1
4
Adjusting the Headband and Microphone
➀Adjust headband width
➁Adjust boom height
➂Adjust boom length
➃Do not attempt to bend the microphone boom!
➄"Roll" the boom for subtle adjustments of microphone position
Windscreens
Care and Maintenance
• Foam windscreens may be cleaned with soap and water.
• For the best sound quality, replace damaged or clogged protective caps and
windscreens.
Windscreen
Grip the internal frame of the windscreen firmly when connecting or removing.
Do not pull on the foam itself.
• To connect, push the windscreen until it snaps into place over the cartridge.
• To remove, pull the windscreen directly off of the cartridge.
Protective Caps
Standard protective cap:
• Gold mesh
• No attenuation
Filtered protective cap:
• Silver mesh
• Attenuates high frequencies
Always use the BETA54 with the
standard protective cap only.
Using the microphone with no cap,
or with the filtered cap, will de-
grade sound quality and alter the
microphone's polar pattern.
5
Positioning the Microphone
BETA53/54
• Position the omnidirectional BETA53 or directional BETA54 microphone
near the corner of the mouth
• If necessary, roll the boom to avoid contact with skin and facial hair
Reversing the Boom
The microphone boom may be reinstalled to position it on the left or right
side of the head.
• Carefully detach the boom holder ①, logo pad ②, and microphone cable
③ from the headband.
• Reattach the boom holder to the opposite side of the wire frame ④.
• Reattach the logo pad ⑤ and microphone cable ⑥.
1
2
3
Specifications
BETA 53 / WBH53 / RPM627
Type
Electret Condenser
Frequency Response
20 to 20,000 Hz
Polar Pattern
Omnidirectional
Output Impedance (RPM627)
160 Ω
Sensitivity
at 1kHz, open circuit voltage
BETA 53 -54.0 dBV/Pa (3.16 mV) [1]
WBH53 -54.0 dBV/Pa (2.0 mV) [1]
Maximum SPL
1 kHz at 1% THD [2]
BETA 53 139.4 dB
WBH53 150.5 dB
Signal-To-Noise Ratio [3]
55.0 dB
Dynamic Range
at 1kHz
BETA 53 96.9 dB
WBH53 108 dB
Self Noise
equivalent SPL, A-weighted, typical
42.5 dB
6
Certifications
This product meets the Essential Requirements of
all relevant European directives and is eligible for
CE marking.
The CE Declaration of Conformity can be ob-
tained from: www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: [email protected]
Power Requirements
BETA 53 11–52 V DC phantom power [4], 2 mA
WBH53 +5 V DC
Polarity
BETA 53 Positive pressure on diaphragm produc-
es positive voltage on pin 2 with respect
to pin 3
WBH53 Positive pressure on diaphragm produc-
es positive voltage on pin 3 with respect
to pin 1
Weight
BETA 53 135 g (4.75 oz.)
WBH53 35 g (1.25 oz.)
Cable
1.5 m (5 ft)
[1] 1 Pa=94 dB SPL
[2] THD of microphone preamplifier when applied input signal
level is equivalent to cartridge output at specified SPL
[3] S/N ratio is the difference between 94 dB SPL and equivalent
SPL of self-noise, A-weighted
BETA 54 / WBH54 / RPM627
Type
Electret Condenser
Frequency Response
50 to 20,000 Hz
Polar Pattern
Supercardioid
Output Impedance (RPM627)
160 Ω
Sensitivity
at 1kHz, open circuit voltage
BETA 54 -56.0 dBV/Pa (2.51 mV) [1]
WBH54 -56.0 dBV/Pa (1.58 mV) [1]
Maximum SPL
1 kHz at 1% THD [2]
BETA 54 141.4 dB
WBH54 152.5 dB
Signal-To-Noise Ratio [3]
55.0 dB
Dynamic Range
at 1kHz
BETA 54 98.3 dB
WBH54 109.4 dB
Self Noise
equivalent SPL, A-weighted, typical
43.1 dB
Power Requirements
BETA 54 11–52 V DC phantom power [4], 2 mA
WBH54 +5 V DC
Polarity
BETA 54 Positive pressure on diaphragm produces
positive voltage on pin 2 with respect to
pin 3
WBH54 Positive pressure on diaphragm produces
positive voltage on pin 3 with respect to
pin 1
Weight
BETA 54 135 g (4.75 oz.)
WBH54 35 g (1.25 oz.)
Cable
1.5 m (5 ft)
[1] 1 Pa=94 dB SPL
[2] THD of microphone preamplifier when applied input signal
level is equivalent to cartridge output at specified SPL
[3] S/N ratio is the difference between 94 dB SPL and equivalent
SPL of self-noise, A-weighted
7
Accessories
BETA53
Component Black Tan
1 Foam Windscreen (5 pieces) RPM304 RPM306
2 Standard Protective Cap (gold mesh) (5
pieces)
RPM208 RPM212
Filtered Protective Cap* (silver mesh) (5
pieces)
RPM220 RPM214
3 Microphone/Boom Assembly with TA4F
Connector (1 piece)
RPM132 RPM134
4 Swiveling Lapel Clip (5 pieces) RPM510 RPM512
5 Boom Holder and Logo Pad (2 each) RPM570 RPM580
6 Headband (1 piece, with boom holder and
logo pad)
RPM550 RPM560
7 4-Pin Mini Connector (TA4F) (1 piece) WA333
8 In-Line Preamp (1 piece) RPM627
BETA54
Component Black Tan
1 Microphone/Boom Assembly with TA4F
Connector (1 piece)
RPM646 RPM648
2 Standard Protective Cap (gold mesh) (5
pieces)
RPM208 RPM212
3 Snap-fit Foam Windscreen (4 pieces) RPM316 RPM318
4 Swiveling Lapel Clip (5 pieces) RPM510 RPM512
5 Boom Holder and Logo Pad (2 each) RPM570 RPM580
6 Headband (1 piece, with boom holder and
logo pad)
RPM550 RPM560
7 4-Pin Mini Connector (TA4F) (1 piece) WA333
8 In-Line Preamp (1 piece) RPM627
Microphone Cartridge5
Case (ground)4
Shield (ground)3
Red1(+5Vdc)
Black (audio out)2
Wireless Test Circuit6
+5Vdc
100k
20k
1.0 uf
1
2
3
4
1
2
3
4
2SK1109
1. Rouge
2. Noir (sortie audio)
3. Blindage (masse)
4. Corps (masse)
5. Capsule de microphone
6. Circuit d’essai sans l
+
–
1. Rot
2. Schwarz (Audioausgang)
3. Abschirmung (Masse)
4. Gehäuse (Masse)
5. Mikrofonkapsel
6. Prüfkreis des Drahtlossystems
1. Rojo
2. Negro (salida de audio)
3. Blindaje (tierra)
4. Chasis (tierra)
5. Cápsula de micrófono
6. Circuito de prueba de sistema inalámbrico
1. Rosso
2. Nero (uscita audio)
3. Schermatura (massa)
4. Involucro (massa)
5. Capsula
6. Circuito per test wireless
1. 赤色
2. 黒色 (音声出力)
3. シールド（アース）
4. ケース（アース）
5. マイクロホンカートリッジ
6. ワイヤレス試験回路
BETA 53 BETA 54
20 200001000 1000050 100
98765432 98765432
+10
0
–10
Hz
dB
–20
+20
Standard Protective Cap
Filtered Protective Cap
20 200001000 1000050 100
98765432 98765432
+10
0
–10
Hz
dB
15 mm (.6 in)
606 mm (2 ft)
+20
–20
–30
0º
125º
Standard Cap1
Filtered Cap2
1Capuchon standard
2Capuchon à ltre
1Standardmäßige Kappe
2Gelterte Kappe
–5 dB
–10 dB
–15 dB
–20 dB
500 Hz
1000 Hz
250 Hz
–5 dB
–10 dB
–15 dB
–20 dB
2.5 kHz
6.3 kHz
10 kHz
1
Tapa estándar
2Tapa con ltro
1
Cappuccio standard
2Cappuccio dotato di ltro
標 準 キ ャップ 1
フィル タ付 きキャップ 2
–5 dB
–10 dB
–15 dB
–20 dB
500 Hz
1000 Hz
250 Hz
–5 dB
–10 dB
–15 dB
–20 dB
2.5 kHz
6.3 kHz
10 kHz
Patent Notice: Patent Des. 451,902
Inhaltsverzeichnis
Andere Shure Mikrofon Handbücher
Shure
Shure PG52 Bedienungsanleitung
Shure
Shure PG27-USB Bedienungsanleitung
Shure
Shure SM7dB Technisches Handbuch
Shure
Shure MV5 Bedienungsanleitung
Shure
Shure 548 Bedienungsanleitung
Shure
Shure M2 Betriebsanleitung
Shure
Shure MX153 Bedienungsanleitung
Shure
Shure BETA 91A Bedienungsanleitung
Shure
Shure ROSWELLITE KSM353 Bedienungsanleitung
Shure
Shure SM35 Bedienungsanleitung
Shure
Shure MV7X Bedienungsanleitung
Shure
Shure Microflex MX395 Bedienungsanleitung
Shure
Shure SM27 Bedienungsanleitung
Shure
Shure 450 Bedienungsanleitung
Shure
Shure EZB/C Bedienungsanleitung
Shure
Shure 10A Bedienungsanleitung
Shure
Shure UNISPHERE 565SD Bedienungsanleitung
Shure
Shure 545SD Bedienungsanleitung
Shure
Shure SM57 Bedienungsanleitung
Shure
Shure VP89L Bedienungsanleitung
Beliebte Mikrofon Handbücher anderer Marken
IK Multimedia
IK Multimedia iRig Stream MIC PRO Bedienungsanleitung
DAPAudio
DAPAudio RM-101 Bedienungsanleitung
AKG
AKG CHM 21 Bedienungsanleitung
Sennheiser
Sennheiser evolution wireless series EM 100 Bedienungsanleitung
Sony
Sony C-48 Bedienungsanleitung
GIGAMEDIA
GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung
