Shure Microflex MX200 Series Bedienungsanleitung

Printed in U.S.A.

www.shure.com

27A14046 (Rev. 2)

MX200 SERIES

• Wide dynamic range and frequency response

for accurate sound reproduction

• Interchangeable cartridges that provide a

choice of polar pattern for each application

• White or black finish that blends unobtrusively

with most surroundings

• RF filtering

Model Variations

Microflex MX202 microphones are available in

black or white with a choice of in-line preamplifier

or plate-mount preamplifier.

The polar pattern of the included cartridge is indi-

cated by a model number suffix:

/C Cardioid

/S Supercardioid

/O Omnidirectional

/N Cartridge not included

Interchangeable Cartridges

Microflex microphones use interchangeable car-

tridges that allow you to choose the polar pattern

for different installations.

Snap-Fit Windscreen

• Snap into the

groove below the

cartridge.

• To remove, spread

the gap with a

screwdriver or

thumbnail.

• Provides 30 dB of

"pop" protection.

Preamp Gain

If necessary, the preamplifier gain

can be reduced by 12 dB. Contact

an authorized Shure service center

for information.

RFI Filtering

Important: Microphones must be used with the

RK100PK preamp to optimize RF immunity.

R183 R184

Supercardioid

R185

Overhead

Microphones

MX200

Shure Microflex®MX200 Series microphones are

miniature electret condenser microphones de-

signed for miking choirs and performance groups.

They are typically suspended over the heads of

the performers. Their high sensitivity and wide fre-

quency range make them suitable for recording,

as well as sound reinforcement applications. An

attached 101mm (4 in.) gooseneck allows them to

be easily aimed at the sound source.

Omnidirectional

Cardioid

R13R16

RED

BLACK

= Factory Default

Microphone Placement

The microphone is most stable when the goose-

neck is bent into a "lazy S" shape. Use the sup-

plied hanging clip and heavy thread or monofila-

ment fishing line to suspend the microphone at a

specific location.

• For choir installations, hang a microphone 0.6

to 0.9m (2 to 3 ft.) in front of the first row, and

0.6 to 0.9m (2 to 3 ft.) over the heads of the

singers in the last row. Aim the microphone at

the back row.

• When miking groups that move or vary in size,

use a boom stand and the supplied stand

adapter.

• If four or more microphones will be open at

once, an automatic mixer, such as the Shure

SCM810 or SCM410, is recommended. Set up

the automatic mixer so that all

overhead microphones gate

on simultaneously.

Permanent Installation

Installing the In-Line Preamp

Use the two supplied mounting clamps to hold the

preamp in place on a wall or ceiling.

Ceiling Tile Installation

Remove plate-mount preamp connection.

1. Drill a 1/2 in. hole into the ceiling tile.

CAUTION: To avoid tile damage, use a 1/2 in.

augur bit and drill very slowly.

2. Unplug the mini 4-pin connector from the pre-

amp and feed the cable through the hole.

3. Place the rubber grommet, tip down, over the

cable and position it to suspend the micro-

phone at the appropriate height.

4. Fit the grommet securely into the hole. For 5/8

in. ceiling tile, use the suppled washer.

5. Reconnect the preamp.

Plate Mount Preamp Installation

The plate-mounted preamp allows you to mount

the preamp in an electical box and use conduit to

run cable through ceilings and walls.

1. Remove preamp housing by removing two phil-

lips head screws.

2. Remove knock-out from the hole in the center

of the cover plate (if present).

3. Cut cable to desired hanging length, allowing

for a 76 to 101 mm (3 to 4 in.) service loop.

4. Clamp strain relief around cable and insert

strain relief into hole in plate.

5. Connect cable leads to input terminal block

(B = Black, R = Red, S = Shield).

6. Using professional-quality, two-conductor,

shielded microphone cable, thread output cable

from outside of preamp through hole with black

bushing.

7. Connect cable to output terminal block (Pin

2 = +, Pin 3 = –, Shield = S).

8. Reattach the preamplifier housing.

.6 – 1 m

(2 – 3 ft.)

.6 – 1 m

(2 – 3 ft.)

1.8 – 3m

(6 – 9 ft.)

0.6 – 1m

(2-3 ft.)

1/2"

INPUT OUTPUT

Specifications

(30.0 ft.)

9.1 m

(5.69 in.)

144.5 mm

(4.84 in.)

123.1 mm

(0.75 in.)

19.0 mm

(0.55 in.)

14.0 mm (0.23 in.)

5.8 mm

(0.46 in.)

11.7 mm

Note: Yellowing of any plastic material can be

caused from cigarette smoke, ultra violet rays, and

other chemical interactions. Once plastic has yel-

lowed, there typically is no cleaning method that

will restore the whiteness.

Certifications

Meets essential requirements of all applicable

European Directives.

Eligible for CE marking.

The CE Declaration of Conformity can be ob-

tained from Shure Incorporated or any of its

European representatives. For contact information

please visit www.shure.com

The CE Declaration of Conformity can be ob-

tained from: www.shure.com/europe/compliance

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: 49-7262-92 49 0

Fax: 49-7262-92 49 11 4

Email: [email protected]

Cartridge Type

Electret Condenser

Frequency Response

50–17000 Hz

Polar Pattern

MX202B/C, MX202W/C: Cardioid

MX202B/S, MX202W/S: Supercardioid

Output Impedance

EIAratedat150Ω(180Ωactual

Output Configuration

Active Balanced

Sensitivity

@ 1 kHz, open circuit voltage

Cardioid –35 dBV/Pa(18 mV)

Supercardioid –34 dBV/Pa(21 mV)

1 Pa=94 dB SPL

Maximum SPL

1kHzat1%THD,1kΩload

Cardioid 124 dB

Supercardioid 123 dB

Equivalent Output Noise

A-weighted

Cardioid 28 dB SPL

Supercardioid 27 dB

Signal-to-Noise Ratio

Ref. 94 dB SPL at 1 kHz

Cardioid 66 dB

Supercardioid 68 dB

Dynamic Range

1kΩload@1kHz

96 dB

Common Mode Rejection

10 Hz to 100 kHz

45 dBminimum

Preamplifier Output Clipping Level

at 1% THD

–6 dBV (0.5 V)

Polarity

Positive sound pressure on diaphragm produces

positive voltage on pin 2 relative to pin 3 of out-

put XLR connector

Environmental Conditions

Operating Temperature –18–57°C

(0–135°F)

Storage Temperature –29–74°C

(–20–165°F)

Relative Humidity 0–95%

Power Requirements

11–52 V DC, 2.0 mA

Asia, Pacific:

Shure Asia Limited

22/F, 625 King’s Road

North Point, Island East

Hong Kong

Phone: 852-2893-4290

Fax: 852-2893-4055

Email: [email protected]

United States, Canada, Latin

America, Caribbean:

Shure Incorporated

5800 West Touhy Avenue

Niles, IL 60714-4608 USA

Phone: 847-600-2000

Fax: 847-600-1212 (USA)

Fax: 847-600-6446

Email: [email protected]

Europe, Middle East, Africa:

Shure Europe GmbH

Jakob-Dieffenbacher-Str. 12,

75031 Eppingen, Germany

Phone: 49-7262-92490

Fax: 49-7262-9249114

Email: [email protected]

150o

120o

150o

120o

180o

30o

60o

90o

30o

60o

150o

120o

150o

120o

180o

30o

60o

30o

60o

–5 dB

90o

–5 dB

–10 dB

–15 dB

90o90o

500 1,000 2,000 5,000 10,000 20,000

50 100 20020

+10

–10

500 1,000 2,000 5,000 10,000 20,000

50 100 20020

+10

–10

500 1,000 2,000 5,000 10,00050 100 20020

+10

–10

250 Hz

500 Hz

1000 Hz

2500 Hz

6400 Hz

10000 Hz

250 Hz

500 Hz

1000 Hz

2500 Hz

6400 Hz

10000 Hz

250 Hz

500 Hz

1000 Hz

2500 Hz

6400 Hz

10000 Hz

150o

120o

150o

120o

180o

30o

60o

90o

30o

60o

150o

120o

150o

120o

180o

30o

60o

30o

60o

–10 dB

–15 dB

90o

–10 dB

–15 dB

–20 dB

90o

150o

120o

150o

120o

180o

30o

60o

90o

30o

60o

90o

150o

120o

150o

120o

180o

30o

60o

90o

30o

60o

–5 dB

–10 dB

–15 dB

90o

20,000

–20 dB

–5 dB

–10 dB

–15 dB

–20 dB

–5 dB

–20 dB

–5 dB

–20 dB –20 dB

–15 dB

–10 dB

150o

120o

150o

120o

180o

30o

60o

90o

30o

60o

150o

120o

150o

120o

180o

30o

60o

30o

60o

–5 dB

90o

–5 dB

–10 dB

–15 dB

90o90o

500 1,000 2,000 5,000 10,000 20,000

50 100 20020

+10

–10

500 1,000 2,000 5,000 10,000 20,000

50 100 20020

+10

–10

500 1,000 2,000 5,000 10,00050 100 20020

+10

–10

250 Hz

500 Hz

1000 Hz

2500 Hz

6400 Hz

10000 Hz

250 Hz

500 Hz

1000 Hz

2500 Hz

6400 Hz

10000 Hz

250 Hz

500 Hz

1000 Hz

2500 Hz

6400 Hz

10000 Hz

150o

120o

150o

120o

180o

30o

60o

90o

30o

60o

150o

120o

150o

120o

180o

30o

60o

30o

60o

–10 dB

–15 dB

90o

–10 dB

–15 dB

–20 dB

90o

150o

120o

150o

120o

180o

30o

60o

90o

30o

60o

90o

150o

120o

150o

120o

180o

30o

60o

90o

30o

60o

–5 dB

–10 dB

–15 dB

90o

20,000

–20 dB

–5 dB

–10 dB

–15 dB

–20 dB

–5 dB

–20 dB

–5 dB

–20 dB –20 dB

–15 dB

–10 dB

150o

120o

150o

120o

180o

30o

60o

90o

30o

60o

150o

120o

150o

120o

180o

30o

60o

30o

60o

–5 dB

90o

–5 dB

–10 dB

–15 dB

90o90o

500 1,000 2,000 5,000 10,000 20,000

50 100 20020

+10

–10

500 1,000 2,000 5,000 10,000 20,000

50 100 20020

+10

–10

500 1,000 2,000 5,000 10,00050 100 20020

+10

–10

250 Hz

500 Hz

1000 Hz

2500 Hz

6400 Hz

10000 Hz

250 Hz

500 Hz

1000 Hz

2500 Hz

6400 Hz

10000 Hz

250 Hz

500 Hz

1000 Hz

2500 Hz

6400 Hz

10000 Hz

150o

120o

150o

120o

180o

30o

60o

90o

30o

60o

150o

120o

150o

120o

180o

30o

60o

30o

60o

–10 dB

–15 dB

90o

–10 dB

–15 dB

–20 dB

90o

150o

120o

150o

120o

180o

30o

60o

90o

30o

60o

90o

150o

120o

150o

120o

180o

30o

60o

90o

30o

60o

–5 dB

–10 dB

–15 dB

90o

20,000

–20 dB

–5 dB

–10 dB

–15 dB

–20 dB

–5 dB

–20 dB

–5 dB

–20 dB –20 dB

–15 dB

–10 dB

Andere Handbücher für Microflex MX200 Series

Inhaltsverzeichnis

Andere Shure Mikrofon Handbücher

Shure

Shure UNIDYNE II 55S Bedienungsanleitung

Shure

Shure PGA 58 Bedienungsanleitung

Shure

Shure PGA58-QTR Bedienungsanleitung

Shure

Shure UNIDYNE III Series Bedienungsanleitung

Shure

Shure 527C Bedienungsanleitung

Shure

Shure KSM9HS Bedienungsanleitung

Shure

Shure Microflex MX391BP Series Bedienungsanleitung

Shure

Shure CVG Series Bedienungsanleitung

Shure

Shure UNISPHERE 565SD Bedienungsanleitung

Shure

Shure 55SH Bedienungsanleitung

Shure

Shure SM10A Bedienungsanleitung

Shure

Shure Spher-O-Dyne 533AV Bedienungsanleitung

Shure

Shure SM31FH Bedienungsanleitung

Shure

Shure KSM44 Bedienungsanleitung

Shure

Shure PGA 52 Bedienungsanleitung

Shure

Shure SM48 Bedienungsanleitung

Shure

Shure SM87A Bedienungsanleitung

Shure

Shure Microflex MX405 Bedienungsanleitung

Shure

Shure BETA 87A Bedienungsanleitung

Shure

Shure SM48 Bedienungsanleitung

Shure

Shure PG Alta Series Bedienungsanleitung

Shure

Shure KSM44 Bedienungsanleitung

Shure

Shure BETA 181 Bedienungsanleitung

Shure

Shure BETA 52A Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

JLab

JLab GO TALK Bedienungsanleitung

Renkforce

Renkforce TY-109 Bedienungsanleitung

Trust

Trust 31008 Bedienungsanleitung