Shure MV5 Bedienungsanleitung

27A24499 (Rev. 2)

USB MICROPHONE

MV5

USER GUIDE

Printed in U.S.A.

Le Guide de l’Utilisateur

Guia del Usuario

Guida dell’Utente

Руководство пользователя

Bedienungsanleitung

日本語

繁體中文

Manual do Usuário

사용자 가이드

Panduan Pengguna

USB Microphone

1. Connect the microphone to a computer

or mobile device. Use the appropriate

cable (USB or Lightning).

The Green status LED indicates a

successful connection.

Note: When using apps like Voice Memo,

the LED will not light until Record is

engaged.

2. Confirm that the MV5 is the selected

audio device.

Most computers and mobile devices

automatically detect the MV5 and assign

it as the primary audio device. If your

computer settings default to another device,

open the sound control panel and select

the MV5. To quickly verify that the device

is recognized, plug headphones into the

MV5 audio output and play an audio track.

If you can hear sound, the microphone is

functioning properly.

Note: When the MV5 is assigned as the

audio device, all monitoring and playback

from the recording software goes to the

headphone output of the MV5.

3. Use the MODE button to select the preset

mode that fits your application.

If the audio is too quiet or causes distortion,

gain can be manually configured. However,

the modes typically do not require additional

gain adjustments. Refer to the "Adjusting

Microphone Level" topic in this guide for

details.

4. In your recording application, select the

MV5 as the input source.

See your software user guide for information

on assigning input sources.

5. Record.

The microphone is ready to use!

Connections and Controls

௟

௣

௠

௤

௡

௥

௢௦

① Mode Selection Button

Press to switch between preset modes

② Mute Button

Press to mute the microphone input

③ Headphone Volume Control

Adjusts the headphone volume

④ Headphone Output

Plug in any headphones with a 3.5 mm (1/8

inch) connector

⑤ Micro USB Port

Use the appropriate cable (USB or Lightning)

to connect the MV5 to a computer or mobile

device

⑥ Voice Mode

The LED indicator illuminates when this

mode is selected

⑦ Status Indicator

LED Behavior Status

Green Active USB or

Lightning connection

Flashing Red (all

3 LEDs)

Muted

⑧ Instrument Mode

The LED indicator illuminates when this

mode is selected

Note: Flat Mode is engaged when both mode

LEDs are off.

Quick Setup

Placement

This section suggests microphone placement for

typical use cases. Keep in mind that there are

many effective ways to record a given source.

Experiment with microphone placement and

settings to find what works best.

Podcast and Voice Recording

Set the microphone to the Voice mode. Speak

directly into the front of the microphone, 2-12

inches (5-30 cm) away. Speaking closer to the

microphone results in more bass response,

similar to voices on a radio broadcast. Make

additional gain adjustments if necessary.

2-12 in

(5-30 cm)

Bands and Louder Sources

To record a band with drums, amplified

instruments, or any other loud sources, start

with Instrument mode for best results. Aim the

microphone towards the group at a distance of

6 to 15 feet (1.83 to 4.6 m). Placement of the

microphone depends on the size of the room,

number of people, and instrument volume. If

possible, walk around the room and listen to

find where it sounds best. Make additional gain

adjustments if necessary.

6-15 ft

(2-4 m)

For a single electric guitar amplifier, aim the

microphone towards the center of the speaker at

a distance of 0 to 18 inches (0 to 45 cm).

0-18 in

(0-45 cm)

Music, Singing, and Acoustic

Instruments

To capture acoustic sources, such as singing,

acoustic guitar, soft percussion, or other musical

instruments, use a close microphone placement.

Start with Instrument mode for best results.

Aim the microphone directly at the sound source.

For a single source, such as a string instrument

or a vocalist, place the microphone 6 to 12

inches (15 to 30 cm) away. For a small group

or a performer who is singing and playing an

instrument simultaneously, use a distance of 2

to 10 feet (0.6m to 3 m). Placing the microphone

farther away results in more ambient room

sound. Make additional gain adjustments if

necessary.

Additional Tips

Shure offers additional educational publications

on recording techniques for specific instruments

and applications. Visit www.shure.com for more

information.

Adjusting Microphone Level

Microphone level (gain) typically does not need

adjustment when using the appropriate preset

mode. However, if you hear distortion or the

audio is too low, adjust the microphone level

in the Audio or Sound control panel of your

computer or recording device.

Keep the following in mind:

• Set the microphone level before adjusting

headphone volume.

• The headphone volume does not affect the

signal level sent to the computer.

• Use the thumbwheel on the microphone to

adjust headphone volume to a comfortable

level. Do not change microphone gain to

adjust the headphone volume.

Mac audio settings panel

Adjusting Headphone Level

The headphone monitoring level is affected

by the device and the computer settings level.

Raise your computer volume and easily adjust

headphones through the MV5 thumbwheel.

Headphone Volume

Microphone Level

Computer Volume Level

Accessing the Control Panel

Windows

1. Open the sound control panel and select the

Recording tab.

2. Open the Shure MV5 device.

3. Under the Levels tab, adjust the gain level

using the slider.

Mac®

1. Open the Audio Midi Settings panel.

2. Select the Shure MV5 device.

3. Click on Input to adjust the gain using

the slider.

Input Meter Level

If your digital audio workstation or recording

software has input meters, adjust the

microphone level so it peaks between -12 and -6

dB. Otherwise, simply listen to the audio to make

sure it is loud enough and not distorting.

-30 -20 -15 -10 -7 -5 -3 -2 -1 0

Peak Levels

The target range for peak levels on a typical

meter is between -12 and -6 dB.

Listening Through

Headphones

The headphone jack provides an equal blend

of the direct microphone signal and audio

playback from the computer. This allows you to

conveniently adjust the headphone volume for

both with one control, the thumbwheel on the

MV5. To adjust the amount of playback audio

relative to the direct microphone signal, use the

computer or DAW mixer settings.

Tip: When first connecting the microphone to

your computer, make sure to raise the volume

level in the sound control panel of the computer

for a strong audio signal. Then adjust headphone

level for comfortable monitoring.

Sampling Rate and Bit Depth

Sample Rate and Bit Depth settings are found in a drop down menu in the audio or sound control

panel of your computer. You can adjust these variables to fit your needs. Select a lower sample rate

for podcast recording, when it is important to have a smaller file for easy download. Select a higher

sample rate for music and more dynamic recordings.

Tip: Record at a higher sample rate and bounce down to an M4A for a file with the highest sound

quality at a manageable size.

Tip for PC users: Make sure that the sample rate and bit depth microphone settings, found in the

sound control panel of the computer, match with the sample rate and bit depth selected in your

software.

Troubleshooting

Issue Solution

The display does not

illuminate

Make sure that the MV5 is fully plugged in.

Audio is too low Check the computer sound control panel settings. When first connecting

the MV5 to your computer, make sure to raise the computer volume

level.

Audio sounds bad Check the sound control panel of the computer to ensure that the MV5 is

fully plugged in and recognized.

Audio is distorted Use the audio meter to ensure that volume peaks are within the target

range. If level is reaching the red peak indicator of the input meter, turn

the gain down.

Audio sounds unnatural

or jittery

Make sure that the sample rate and bit depth microphone settings,

found in the sound control panel of the computer, are consistent with the

sample rate and bit depth selected in your software.

MV5 is plugged in, but

the volume meter does

not register a signal.

Edit the privacy setting for the iOS device under SETTINGS > PRIVACY

> MICROPHONE to give the recording application permission to use the

microphone.

Device not working with

USB hub.

The MV5 requires 250 mA per port. Check USB hub documentation for

current/port specification.

Preset Modes

Three selectable modes adjust settings for gain, equalization, and dynamics to bring out the best

sound characteristics for your recording needs.

Mode Application Characteristics

Voice

Use for speech or vocals

in podcasting or musical

applications

Equalization to emphasize clarity and fullness, and

gentle compression to keep levels consistent. A de-

esser reduces sibilance (the harsh sound that occurs

when words with an "S" are spoken).

Instrument

Best for acoustic instruments

and live music applications

Transparent compression to smooth out volume

spikes and bring quiet passages forward. Equalization

emphasizes detail and gives an overall natural sound.

Flat Suited for any application A completely unprocessed signal (no equalization

or compression settings used). Adds flexibility when

processing the audio after recording.

Specifications

MFi Certified

Yes

DSP Modes (Presets)

Voice/Instrument/Flat

Cartridge Type

Electret Condenser (16 mm)

Polar Pattern

Unidirectional (Cardioid)

Bit Depth

16-bit/24-bit

Sampling Rate

44.1/48 kHz

Frequency Response

20 Hz to 20,000 Hz

Adjustable Gain Range

0 to +36 dB

Sensitivity

-40 dBFS/Pa at 1 kHz[1][2}

Maximum SPL

130 dB SPL [2]

Headphone Output

3.5 mm (1/8")

Power Requirements

Powered through USB or Lightning connector

Mute Switch Attenuation

Yes

Mounting Stand

Included

Stand Adapter

1/4 inch 20 thread (standard tri-pod mount)

Housing

PC/ABS

Net Weight

Without Mounting

Stand

0.09 kg (3.17oz.)

With Mounting Stand 0.16 kg (5.64oz.)

Dimensions

66 x 67 x 65 mm H x W x D

Dimensions with Stand

89 x 142 x 97 mm H x W x D

Cable

1 m USB cable/1 m Lightning cable (LTG

models only)

[1] 1 Pa=94 dB SPL

[2]At Minimum Gain, Flat Mode

Windows • Windows 7 and Windows 8

• Minimum RAM = 64 MB

• USB 2.0

Macintosh • OS X Lion 10.7, OS X

Mountain Lion 10.8, OS

X Mavericks 10.9, OS X

Yosemite 10.10

• Minimum RAM = 64 MB

• USB 2.0

iOS • iOS 8.0

• iOS 7.0

iPhone • iPhone 5

• iPhone 5c

• iPhone 5s

• iPhone 6

• iPhone 6 Plus

iPod Touch • 5th gen

iPad • iPad 4th gen

• iPad Air

• iPad Air 2

iPad Mini • iPad Mini 1st gen

• iPad Mini 2nd gen

• iPad Mini 3rd gen

Furnished Accessories

MV5 Desktop Stand AMV5-DS

1 m USB cable AMV-USB

1 m Lightning cable AMV-LTG

System Requirements and

Compatibility

Information to the user

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment generates

uses and can radiate radio frequency energy

and, if not installed and used in accordance with

the instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and the receiver.

• Connect the equipment to an outlet on

a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/

TV technician for help.

Industry Canada ICES-003 Compliance Label:

CAN ICES-3 (B)/NMB-3(B)

Note: Testing is based on the use of supplied

and recommended cable types. The use of

other than shielded (screened) cable types may

degrade EMC performance.

This product meets the Essential Requirements

of all relevant European directives and is eligible

for CE marking.

The CE Declaration of Conformity can be

obtained from: www.shure.com/europe/

compliance

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: 49-7262-92 49 0

Fax: 49-7262-92 49 11 4

Email: [email protected]

"Made for iPod," "Made for iPhone," and "Made for iPad" mean that an electronic accessory has

been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified

by the developer to meet Apple performance standards. Apple is not responsible for the operation

of this device or its compliance with safety and regulatory standards. Please note that the use of this

accessory with iPod, iPhone, or iPad may affect wireless performance.

iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch, and Retina are trademarks of Apple Inc.,

registered in the U.S. and other countries. iPad Air and iPad mini are trademarks of Apple Inc. The

trademark "iPhone" is used with a license from Aiphone K.K.

Mac®and Lightning®are registered trademarks of Apple Inc.

Certifications

Andere Handbücher für MV5

Inhaltsverzeichnis

Andere Shure Mikrofon Handbücher

Shure

Shure Microflex MX300 series Bedienungsanleitung

Shure

Shure MX150 Bedienungsanleitung

Shure

Shure 514B Bedienungsanleitung

Shure

Shure SM98A Bedienungsanleitung

Shure

Shure SM35 Bedienungsanleitung

Shure

Shure 10A Bedienungsanleitung

Shure

Shure Unisphere B PE588B-CN Bedienungsanleitung

Shure

Shure ROSWELLITE KSM313 Bedienungsanleitung

Shure

Shure Microflex MX418D Bedienungsanleitung

Shure

Shure KSM9HS Bedienungsanleitung

Shure

Shure Microflex MX392 Bedienungsanleitung

Shure

Shure PEISL-SP Bedienungsanleitung

Shure

Shure VP64A Bedienungsanleitung

Shure

Shure MC11J Bedienungsanleitung

Shure

Shure M44G Bedienungsanleitung

Shure

Shure VP83 Bedienungsanleitung

Shure

Shure Versadyne PE57 Bedienungsanleitung

Shure

Shure UNF Wireless system Bedienungsanleitung

Shure

Shure 819 Bedienungsanleitung

Shure

Shure PGA 56 Bedienungsanleitung

Shure

Shure KSM8 Dualdyne Bedienungsanleitung

Shure

Shure Microflex MX300 series Bedienungsanleitung

Shure

Shure BETA53 Bedienungsanleitung

Shure

Shure EZG Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

JLab

JLab GO TALK Bedienungsanleitung

Renkforce

Renkforce TY-109 Bedienungsanleitung

Trust

Trust 31008 Bedienungsanleitung