Shure MV5C Bedienungsanleitung

MV5C

Home Office Microphone

The Shure USB home office microphone, MV5C, user guide.

Version: 4.0 (2022-L)

Shure Incorporated

2/11

Table of Contents

MV5C Home Office Microphone 3

General Description 3

Features 3

Quick Setup 3

Connections and Controls 3

Preset Modes 5

Placement 5

Adjusting Microphone Level 5

Adjusting Headphone Level 6

Accessing the Control Panel 6

Monitoring Options for the MV5C 6

Listening Through the Computer Output 6

Listening Through the Headphone Output (Direct Monitor

ing) 6

MV5 vs MV5C 7

Troubleshooting 7

System Requirements and Compatibility 8

Specifications 8

Accessories 10

Furnished Accessories 10

Certifications 10

Information to the user 10

Shure Incorporated

3/11

•

MV5C

Home Office Microphone

General Description

The Shure MV5C microphone connects directly to a computer over a USB connection. Ideal for conferencing applications, the

MV5C features a preset speech mode for clear vocal reproduction.

Features

Convenient, Compact Design: This sleek and durable microphone mounts on the included MV5C desktop stand or any

stand with a 1/4" threaded adapter.

Plug and Play: The MV5C automatically becomes the active audio input device when plugged into a computer. The audio

output will remain the computer speakers or headphone output.

Preset Modes: Minimize setup time with the preset DSP mode designed to automatically adjust your gain, equalization

and compression for speech applications.

Quick Setup

Connect the microphone to your computer. Use the appropriate cable (USB-A or USB-C).

The center green status LED indicates a successful connection.

Confirm that the MV5C is the selected audio device.

Most computers automatically detect the MV5C and assign it as the primary audio device. If your computer settings de

fault to another device, open the sound control panel and select MV5C.

Note: The first time you connect to the MV5C, audio playback will remain assigned to the previously selected output. This means the microphone will

be enabled for audio input, but not output. Audio output will still come through your computer speaker or headphone output.

Hold the MODE button while plugging in the MV5C to enable the MV5C headphone output.

The MV5C headphone output is not enabled to ensure that your audio playback is not interrupted. However, to enable

the MV5C headphone output, hold the MODE button while you connect the MV5C. The headphone LED will turn green

to indicate that the headphone output is active.

Press the MODE button to toggle speech mode on and off.

Speech mode is a gain, compression and EQ preset designed to optimize voice tone and clarity. The green speech

icon LED indicates that speech mode is on.

In your conferencing application, select the MV5C as the input source.

See your software user guide for information on assigning input sources.

For more information about monitoring options, see the Monitoring Options for the MV5C section.

Shure Incorporated

4/11

Connections and Controls

①Mode Selection Button

Press to turn speech mode on and off.

②Mute Button

Press to mute the microphone input. All MV5C LEDs will turn red when microphone is muted.

③Headphone Volume Control

Adjusts the headphone volume when the MV5C headphone output is enabled.

④Headphone Output

Plug in any headphones with a 3.5 mm (1/8 inch) connector.

⑤Micro USB Port

Use the appropriate cable (USB-A or USB-C) to connect the MV5C to a computer.

⑥Monitor Indicator (Headphone LED)

LED Behavior Status

Green Headphone output is enabled. Direct monitoring is on.

Red Headphone output is enabled. Direct monitoring is off.

Off Headphone output is disabled.

Note: Direct monitoring refers to listening to playback through the MV5C headphone output.

⑦Status Indicator

LED Behavior Status

Green Active USB connection

Red (all 3 LEDs) Muted

Shure Incorporated

5/11

⑧Speech Mode

The LED indicator illuminates when speech mode is selected.

Preset Modes

These selectable modes adjust settings for gain, equalization, and dynamics to bring out the best sound characteristics for your

voice recording needs.

Mode Application Characteristics

Speec

Use for speech or vocals

in conferencing applica

tions

A mix of preset gain, compression and EQ processing that optimizes the sound of

your voice for clarity. A de-esser reduces sibilance (the harsh sound that occurs

when words with an "S" are spoken).

Flat Suited for any application A completely unprocessed signal (no equalization or compression settings used).

Adds flexibility when processing the audio after recording.

Placement

For conferencing applications, place the MV5C 12-18 inches (30-46 cm) away from your face and select speech mode. For

best results, place the microphone just to the left or right of your keyboard with the circular Shure logo pointed towards your

mouth. This properly orients the microphone for optimal sound pickup.

Shure Incorporated

6/11

•

Adjusting Microphone Level

Microphone level (gain) typically does not need adjustment when using the microphone with a conferencing platform. However,

if you hear distortion or the audio is too low, adjust the microphone level in the audio or sound control panel of your computer.

Keep the following in mind:

Set the microphone level before adjusting headphone volume.

The headphone volume does not affect the signal level sent to the computer.

Adjusting Headphone Level

Easily adjust the headphone monitoring level by using the MV5C thumbwheel by enabling the MV5C headphone output.

Accessing the Control Panel

Windows

Open the Settings window, select System > Sound.

Select Shure MV5C as your input device.

Adjust the gain by using the Levels slider.

Mac

In System Preferences, select Sound.

Select the Shure MV5C device as your Input and Output source.

Use the Input volume slider to adjust the gain.

Monitoring Options for the MV5C

Listening Through the Computer Output

Connect the MV5C to your computer using the USB cable and listen through your computer’s built-in speakers or

headphone output. If you are listening to computer audio playback, the headphone LED on the MV5C will be off because the

headphone output is off.

Listening Through the Headphone Output (Direct Monitoring)

When the MV5C headphone output is enabled, the headphone jack provides an equal blend of the direct microphone signal

(your voice) and audio playback from the computer (your conference). This allows you to conveniently adjust the headphone

volume for both with one control, the MV5C thumbwheel.

Shure Incorporated

7/11

Press and hold the MV5C Mode button while connecting to your computer using the USB cable. Now connect head-

phones to the MV5C headphone output to hear the audio playback. If you are listening to audio from the headphone out

put, the headphone LED on the MV5C will be green.

To turn off headphone audio, press and hold the MV5C mode button. The headphone LED will turn amber.

Tip: When first connecting the microphone to your computer, make sure to raise the volume level in the sound control panel of

the computer for a strong audio signal. Then adjust headphone level for comfortable monitoring.

MV5 vs MV5C

Troubleshooting

Issue Solution

The middle LED does not illu-

minate Make sure that the MV5C is fully plugged in.

Audio is too low Check the computer sound control panel settings. When first connecting the MV5C to

your computer, make sure to raise the computer volume level.

Audio sounds bad Check the sound control panel of the computer to ensure that the MV5C is fully plugged

in and selected as your audio device.

Audio is distorted Use the audio meter to ensure that volume peaks are within the target range. If level is

reaching the top of the input meter, turn the gain down.

Device not working with USB

hub.

The MV5C requires 250 mA per port. Check USB hub documentation for current/port

specification.

General troubleshooting Quit and re-start your app.

Reboot the computer.

Note: Contact Shure Service and Repair if you continue to experience any issues.

Shure Incorporated

8/11

System Requirements and Compatibility

Windows

Windows 7 and higher

Minimum RAM = 64 MB

USB 2.0

Macintosh

OS X Lion 10.7 and higher

Minimum RAM = 64 MB

USB 2.0

Specifications

DSP Modes (Presets)

Speech/Flat

Cartridge Type

Electret Condenser (16 mm)

Polar Pattern

Unidirectional (Cardioid)

Bit Depth

16-bit/24-bit

Sampling Rate

48 kHz

Frequency Response

20 Hz to 20,000 Hz

Adjustable Gain Range

0 to +36 dB

Sensitivity

40 dBFS/Pa at 1 kHz[1] [2}

Maximum SPL

130 dB SPL [2]

Headphone Output

3.5 mm (1/8″)

Shure Incorporated

9/11

Power Requirements

Powered through USB connector

Mute Switch Attenuation

Yes

Mounting Stand

Included

Stand Adapter

1/4 inch 20 thread (standard tri-pod mount)

Housing

PC/ABS

Net Weight

Without Mounting Stand 0.09 kg (3.17oz.)

With Mounting Stand 0.16 kg (5.64oz.)

Dimensions

66 x 67 x 65 mm H x W x D

Dimensions with Stand

89 x 142 x 97 mm H x W x D

Cable

1 m USB-A cable/1 m USB-C cable

[1] 1 Pa=94 dB SPL

[2]At Minimum Gain, Flat Mode

Polar Pattern

Shure Incorporated

10/11

•

Frequency Response

Accessories

Furnished Accessories

MV5 Desktop Stand AMV5-DS

1 m USB cable AMV-USB

1 m USB-C cable 95C38076

Certifications

Information to the user

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the manufacturer's instruction manual, may cause interference with radio and television reception.

Notice: The FCC regulations provide that changes or modifications not expressly approved by Shure Incorporated could void

your authority to operate this equipment.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip

ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc

tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be de

termined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired operation.

Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)

Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC per

formance.

Andere Handbücher für MV5C

Inhaltsverzeichnis

Andere Shure Mikrofon Handbücher

Shure

Shure Microflex MX395 Bedienungsanleitung

Shure

Shure SM14A Bedienungsanleitung

Shure

Shure WH10 Bedienungsanleitung

Shure

Shure PGA81 Bedienungsanleitung

Shure

Shure 561 Bedienungsanleitung

Shure

Shure SV100 Bedienungsanleitung

Shure

Shure W10BT Bedienungsanleitung

Shure

Shure 526T Series II Super Punch Bedienungsanleitung

Shure

Shure SV100C Bedienungsanleitung

Shure

Shure C Series Bedienungsanleitung

Shure

Shure PGA 56 Bedienungsanleitung

Shure

Shure MV88+ Bedienungsanleitung

Shure

Shure SM31FH Bedienungsanleitung

Shure

Shure PSM 200 Bedienungsanleitung

Shure

Shure SM35 Bedienungsanleitung

Shure

Shure 588SA Bedienungsanleitung

Shure

Shure SM58 Bedienungsanleitung

Shure

Shure Easyflex EZG Series Bedienungsanleitung

Shure

Shure Microflex MX391 Series Bedienungsanleitung

Shure

Shure AXIENT DIGITAL ADX2FD Bedienungsanleitung

Shure

Shure 202 Bedienungsanleitung

Shure

Shure PSM 200 Bedienungsanleitung

Shure

Shure BG 1.0 Bedienungsanleitung

Shure

Shure KSM11 Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

JLab

JLab GO TALK Bedienungsanleitung

Renkforce

Renkforce TY-109 Bedienungsanleitung

Trust

Trust 31008 Bedienungsanleitung