Shure Stem Room Bedienungsanleitung

Stem Room

Setup Guide

Stem Room Set Up online user guide.

Version: 1.0 (2021-I)

Shure Incorporated

2/5

Table of Contents

Stem Room Setup Guide 3

Setting Up Your First Room 3

Need Some Help? 5

Shure Incorporated

3/5

•

◦

•

Stem Room 

Setup Guide

Setting Up Your First Room

Stem Ecosystem Devices are designed as a complete solution by pairing hardware with the Stem Ecosystem Platform.Tocre

ate your ideal setup, mix and match devices and set up your room to best meet your needs.

①Locate Ethernet and existing enterprise network hardware

Locate the established enterprise network or routing device.

Identify available PoE+ port(s) or PoE+ switch.

Connect your PoE+ switch between the network and your Stem device(s).

Note: All Stem devices must be connected to an existing established network or routing device for DHCP IP address assignment.

②Wait for your devices to fully boot up

When Wall and Table are fully booted, you will hear an audible chime.

When Ceiling, Hub, and Hub Express are fully booted, you will see a solid blue light.

③Find your IP address

Upon boot up, your device(s) will receive an IP address from the DHCP server.

To locate your device's IP address:

Filter the MAC address within your DHCP server (MAC addresses for all Stem Ecosystem Devices begins with

D8:34:EE).

Use the Stem Upgrader app available in the Microsoft Store (Windows 10 and later)

For Table and Wall devices, press the Vol+ and Vol- simultaneously for 5 seconds and the device will read out its IP

address (firmware 1.4.0 and later).

④Access the Stem Ecosystem Platform

Enter the IP address from any of your Stem devices in your web browser to access the Stem Ecosystem Platform.

Logging into the HTML interface using the IP address of any one Stem device allows you to make configuration changes

to your Stem Ecosystem Network.

Note: Make sure the computer used to access the HTML interface is on the same network (subnet) as your Stem devices.

⑤Create an Organization

When you access the HTML interface for the first time, a pop-up message will appear asking if you want to create an Or

ganization. This can add an additional layer of security by keeping your rooms and devices password protected to prevent

unauthorized access to your Stem Ecosystem.

Name your Organization and create a password of your choice using numbers, upper-case letters, and lower-case letters.

Save your password for future use.

Note: If you forget your Organization password, contact Stem customer service.

Shure Incorporated

4/5

•

◦

•

◦

•

◦

•

◦

•

⑥Add all devices to your Organization

You can add the rest of your devices to your Organization from the same HTML interface you used to create it.

To add devices to the Organization:

Go to Ecosystem > Devices.

Select a device with red text (red text indicates a device does not belong to an Organization) and type in the Organiza

tion password. Do this for each device outside of the Organization.

Get more information about how devices are displayed in the Devices list.

⑦Create a Room

Now that all your devices have joined your Organization,youcancreatearoom.Thisallowsyourdevicestoworkinuni

son as a single audio endpoint.

To create a room:

Go to Ecosystem > Add Room.

To name your room, click .

Once you've renamed your room, click Add Devices and select all of the devices you want to add.

To confirm your selection, click .

⑧RoomAdapt

Once your room is created and devices are assigned, run RoomAdapt.

Eachdevicesendsoutanaudiosignalthatwillhelpthemanalyzetheroom’sacoustics.Devicesautomaticallyselfcali

brate for optimal performance based on their placement in the room.

To run RoomAdapt:

Go to Ecosystem > Rooms and select the room you want to adapt.

Click in the room's function menu.

Note: Make sure devices are set up in their desired locations before running RoomAdapt, and make sure to run it again any time a device is moved to a

new location.

⑨RoomCheck

After running RoomAdapt, you can use RoomCheck, a 5-second test that analyzes the clarity of your voice from anywhere

in the room.

To run RoomCheck:

Go to Ecosystem > Rooms and select the room you want to check.

Select Edit Layout by the room's design. If there is no RoomDesign created, add the room's design and drag-and-drop

the devices into the room. Make sure the devices in the design are placed in the same physical location as they are in

the room.

With somebody in the room, click and ask them to speak for 5 seconds.

Once the recording is complete, a color-coordinated heatmap highlighting the audio quality for different areas in the

room appears.

Ifyourheatmapshowsinadequatecoverage,youcanchecktheroomagain,orconsidermovingyourdevicesforbet

ter audio pickup.

⑩Test your Stem Room setup

Connect your Stem device to your PC using the provided USB-A to USB-B cable.

Shure Incorporated

5/5

•

When using more than one Stem device in your room, you must use a Stem Hub or Stem Hub Express.TheUSBconnec

tion will be between the Hub and computer.

Using your preferred conferencing software, start a test call. The Stem Customer Happiness teamisavailabletohelpcar

ry out your test call, and to answer any other questions you may have.

Need Some Help?

Website: shure.com/stem

Email: [email protected]

Telephone: (949) 877-STEM (7836)

Setup Videos: youtube.com/shuresystems

Product Guides: stemaudio.com/product-resources

Additional Installation Resources: stemaudio.com/installation-resources

Inhaltsverzeichnis

Andere Shure Mikrofon Handbücher

Shure

Shure 548 Bedienungsanleitung

Shure

Shure VR300 Bedienungsanleitung

Shure

Shure MV5C Bedienungsanleitung

Shure

Shure SM81 Bedienungsanleitung

Shure

Shure BETA 98/S Bedienungsanleitung

Shure

Shure VP88 Bedienungsanleitung

Shure

Shure KSM137 Bedienungsanleitung

Shure

Shure SM27-SC Bedienungsanleitung

Shure

Shure CVO-B/C Bedienungsanleitung

Shure

Shure MV5 Bedienungsanleitung

Shure

Shure Microflex MX412D Bedienungsanleitung

Shure

Shure WH10 Bedienungsanleitung

Shure

Shure WM98 Bedienungsanleitung

Shure

Shure Advance MXA310 Bedienungsanleitung

Shure

Shure M73G Bedienungsanleitung

Shure

Shure MUSIC EDUCATORS Bedienungsanleitung

Shure

Shure 275SK Bedienungsanleitung

Shure

Shure UNIDYNE 580SA Bedienungsanleitung

Shure

Shure Microflex MX405 Bedienungsanleitung

Shure

Shure SM58 Bedienungsanleitung

Shure

Shure MV88+ Bedienungsanleitung

Shure

Shure 522 Bedienungsanleitung

Shure

Shure 527A Bedienungsanleitung

Shure

Shure Microflex MX395 Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

JLab

JLab GO TALK Bedienungsanleitung

Renkforce

Renkforce TY-109 Bedienungsanleitung

Trust

Trust 31008 Bedienungsanleitung