Shure VP88 Bedienungsanleitung

VP88

Stereo Condenser Microphone

Online user guide VP88 stereo condenser microphone.

Version: 2.2 (2022-J)

Shure Incorporated

2/13

Table of Contents

VP88 Stereo Condenser Microphone 3

General Description 3

Features 3

Mounting 3

Power 4

Battery Power 4

Installing and Replacing the Battery 4

Connections 4

Using an Additional Microphone 5

Monitoring 5

Minimizing Wind and Breath Noise 5

Low-Frequency Rolloff 5

Output Mode 5

Stereo Output Mode 6

External Matrixes 7

Specifications 8

Frequency Response and Polar Patterns 10

Accessories 12

Furnished Accessories 12

Optional Accessories 12

Certifications 12

Shure Incorporated

3/13

•

VP88 

Stereo Condenser Microphone

General Description

The Shure Model VP88 is a stereo microphone equally effective in studio broadcasting applications as in the field for electronic

news gathering (ENGL).

Thisstereomicrophonecombinestwocondensercartridgesinasinglehousing,inamid-side(M-S)microphonecartridgecon-

figuration.Onecartridge(Mid)facesforwardtocaptureon-axissoundinacardioidpattern.Theothercartridge(Side)isbi-di-

rectional, capturing sound from either side.

Containing three settings for different degrees of stereo image separation, the VP88 contains an internal M-S matrix that can

be bypassed if an external matrix is used, or if stereo imaging is done in post-production. External switches control output

mode, stereo imaging, low-frequency roll off settings, and battery on/off.

When the VP88 is set for stereo mode operation (H, M, or L), the left and right signals should remain fully separated and kept

at equal levels to maintain a balanced stereo effect.

Features

Time-coherent, Mid-Side (M-S) design for optimal stereo imaging

Built-in stereo matrix for direct control of the stereo spread; direct M-S outputs provided

40 to 20,000 Hz frequency response

Low noise and distortion, wide dynamic range

Switch-selectable,low-frequencyroll-off(12dB/octavebelow80Hz)forreducedpickupofambientnoiseandstandvibra-

tion

Phantom power or 6V camera battery with LED power indicator

Internal shock mount for reduced stand vibration and handling noise

Impact resistant, durable construction

Integrated heavy-duty "pop" screen

Windscreen, swivel mount adapter, and Y-cable included

Mounting

The VP88 can be mounted on a standard microphone floor stand, fishpole or boom. Make sure the front of the grille faces the

sound source and the top of the microphone faces up, so that the resulting stereo image matches the left and right components

of the sound source.

Shure Incorporated

4/13

Microphone Orientation

Power

Phantom Power The VP88 can operate on an internal 6V battery or phantom power from any microphone mixer or console

providing 9 to 52 Vdc, or by a phantom power supply such as the Shure PS1A. Each balanced audio cable pair (pins 2 and 3:

Mid/Left;pins4and5:Side/Right)carriesthesupplycurrenttothemicrophone,andthecableshield(pin1)isthegroundre-

turn. The Mid or Side output can be used individually with either phantom or battery power. When operating in the Stereo mode

without battery, both Mid/Left and Side/Right outputs must be phantom powered.

Battery Power

If phantom power is not available, move the Battery switch to the Batt On position. The adjacent LED will flash indicating at

least five hours of useful battery life, and if no flashing is observed the battery should be replaced. The battery does not drain

when phantom power is applied.

Installing and Replacing the Battery

TheVP88usesa6Vcylindricalbatterycommonlyusedincameras.Averagebatterylifedependsonthetypeofbattery:typi-

cally 70 hours for silver oxide/lithium and 40 hours for alkaline.

SPEC. AGENCY/ MANU

FACTURER SILVER OXIDE LITHIUM MANGANESE ALKA

LINE

NEDA 1406SOP 500SL 1414A

IEC 4SR44 2CR1/3N 4LR44

Duracell PX28 PX28L

Eveready 544 L544 A544

Kodak KS28

Panasonic 4G13 4LR44

Radio Shack 26-469

Varta V28PX V28PXL V4304PX

To install or replace the battery, proceed as follows:

Disconnect the microphone cable and unscrew the VP88 lower handle.

Carefully slide the lower handle away from the grille, exposing the battery compartment. If necessary, remove the old

battery.

Insert the new battery, observing the polarity marking in the battery compartment.

Slide the lower handle back into position and tighten.

Shure Incorporated

5/13

Connections

UsethesuppliedY-splittercabletoconnecttheVP88totwoinputsofamixerorconsole.Theredconnector,marked“M”and

“L”,carriestheMidsignal(inMSmode)orleftsignal(instereomode).Thegreenconnector,marked“S”and“R”,carriesthe

Side signal (in MS mode) or right signal (in stereo mode). For stereo mode operation, connect the left (L) splitter connector to

the Channel 1 input and the right (R) splitter connector to the Channel 2 input of the mixer or console. Set the Channel 1 pan

pot to full left and the Channel 2 pan pot to full right.

Use the Shure C110 Extension Cable (available as an accessory) for extended cable runs between the VP88 and a mixer or console.

Using an Additional Microphone

A second (mono) microphone can be used for interviewing or close miking. Turn its channel pan pot to the center position and

set its level independently.

Monitoring

To check the balance for the mono listener, monitor sound in mono mode as well as stereo. Since the side signal is cancelled

in mono, the mono output will be equal to the cardioid Mid cartridge signal only, regardless of the side level control setting.

Minimizing Wind and Breath Noise

The integrated pop filter provides reduction of breath and wind sound. Use the removable foam windscreen for high intensity

wind and speaking conditions.

Low-Frequency Rolloff

A low-frequency rolloff (12 dB per octave cut below 80 Hz) rolloff reduces pickup of low-frequency noise and vibration. Set the

upper control switch on the VP88 to either of the two low-frequency rolloff positions, depending on whether phantom or battery

power is being used.

Rolloff Selection Switch

Shure Incorporated

6/13

Output Mode

The lower control sets the VP88 to either MS Mode, or one of three Stereo modes. (L, M, or H).

Output Mode Selection Switch

Stereo Output Mode

In Stereo Mode, the VP88 uses its internal matrix to mix the Mid and Side signals and provide Left and Right stereo outputs.

The three settings (H, M, and L), determine the strength or width of the stereo effect, as described below. Nominal Left and

Right pickup patterns are shown in the following series.

The mono sum (Left + Right) in any Stereo position is always equal to the Mid signal, ensuring mono compatibility.

L (Low): Sidelevel6.0dBlowerthanMidlevel.Thestereoimagespreadofthestereoimagesissmall.Usethissettingfordis-

tantmiking,orinsituationswherethemicrophonedirectionalitycannotbewellcontrolled,suchashand-helduse.IntheLposi-

tion, the microphone also picks up the least amount of ambient sound from the side, and can be used to reduce high ambient

noise or reverberation. The L setting can be useful if the area being miked is already very wide. However, the degree of stereo

effect may be compromised in narrow performing areas.

M (Medium): Side level is 1.9 dB lower than Mid level. The increased side ambience pickup and stereo spread make the M

setting ideal for most applications.

H (High): Side level is1.6 dB higher than Mid level. The H position provides the most side ambience pickup and the greatest

amount of stereo spread. This setting is only appropriate if a high degree of ambience pickup is acceptable and the performing

area is not excessively wide.

MS Output Mode: InMSmode,theVP88’sinternalstereomatrixisbypassed.Thesignalfromthemidcartridgeissenttothe

redconnectorontheY-splittercable(M)andthesidecartridgeoutputissenttothegreenconnector(S).TheSideon-axissen-

sitivity(90°fromthefrontaxisofthemicrophone)is1.6dBhigherthantheon-axissensitivityoftheMidoutput.Thesensitivi-

ties of the Mid and Side outputs are equal at 45° off the front axis of the microphone. The polarity of the left lobe of the Side

output matches the polarity of the Mid output. The right lobe of the Side output is opposite polarity.

Low Stereo (L)

Shure Incorporated

7/13

Medium Stereo (M)

High Stereo (H)

MS Output Mode

External Matrixes

When using an external stereo matrix, such as a matrix transformer or active matrix circuitry, set the VP88 to MS mode. The

MidandSideoutputscanbeprocessedthroughasum-and-differencematrixtoproduceLeftandRightstereosignalsasfol-

lows:

Left = Mid + Side

Right = Mid - Side

An1:1ratioofMidtoSideproducesstereosignalsidenticaltothoseobtainedwithStereoOutputswitchsettoHigh(H).Re-

sults similar to the Medium (M) and Low (L) settings can be obtained by attenuating the side signal before matrixing.

Shure Incorporated

8/13

An external matrix can be useful when recording, because decisions on stereo imaging are deferred to the post-production stage.

Specifications

Type

Single-point stereo (MS configuration) condenser

Polar Pattern

Mid Cartridge Cardioid

Side Cartridge Bidirectional

Frequency Response

40to20,000Hz

Output Impedance

EIAratedat150Ω(100Ωactual)

Sensitivity

open circuit voltage, @ 1 kHz, MS Mode

-66dB[1](0.5mV)

Maximum SPL

800 Ω load 129dB

150 Ω load 119dB

Signal-to-Noise Ratio[3]

70dB

Dynamic Range

105dBMaximumSPL,A-weighted

Clipping Level

@ 1 kHz, 1% THD

800 Ω load

Mid Cartridge -12dBV(0.25V)

Side Cartridge -10dBV(0.30V)

150 Ω load

Mid Cartridge -25dBV(0.06V)

Side Cartridge -19dBV(0.11V)

Self Noise

equivalent SPL

24dBA-weighted,28dBtypical

Hum Pickup

-4dBequivalentSPLina1millioerstedfield(60XXXXXXXXXXXX)

Shure Incorporated

9/13

Operating Temperature Range

-18°C (0°F) to 57°C (135°F)

Storage Temperature Range

-29°C (-20°F) to 74°C (165°F)

Operating Relative Humidity

0 to 90%

Polarity

Positive pressure applied from any direction to the Mid cartridge or from the left to the Side cartridge in the

MS mode, or applied from the front in the Stereo mode produces positive voltage on pin 2 relative to pin 3

(Mid/Left) and pin 4 relative to pin 5 (Side/Right).

Housing

Brass and nickel-plated aluminum construction with stainless steel grille. Finished in satin black vinyl

enamel

Power Requirements

9–52VDC[4]phantompower(IEC-61938),1.3mAoutput,2.6mAtotal

Battery

Type 6Vcylindrical

Life 70hours

Current Drain 2.4mAtotal

Overvoltage Protection

Maximum External Voltage applied to Pins 2 through 5 with respect to Pin 1: ± 75 Vdc

Net Weight

417g(14.7oz.)

[1] 1 Pa=94 dB SPL

[3]S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted

[4]All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower

voltages, but with slightly decreased headroom and sensitivity.

Shure Incorporated

10/13

Frequency Response and Polar Patterns

Typical Frequency Response of Middle Cartridge

Typical Frequency Response of Side Cartridge

Typical Middle Cartridge Polar Pattern

Andere Handbücher für VP88

Inhaltsverzeichnis

Andere Shure Mikrofon Handbücher

Shure

Shure SM53 Installations- und Benutzerhandbuch

Shure

Shure WL93 Bedienungsanleitung

Shure

Shure SM31FH Bedienungsanleitung

Shure

Shure ROSWELLITE KSM313 Bedienungsanleitung

Shure

Shure WL50 Bedienungsanleitung

Shure

Shure Beta 53 Bedienungsanleitung

Shure

Shure R191 Gebrauchs- und Pflegehandbuch

Shure

Shure PE9 Bedienungsanleitung

Shure

Shure CB42 Long Ranger Bedienungsanleitung

Shure

Shure SM58LC Bedienungsanleitung

Shure

Shure W15HT/87 Bedienungsanleitung

Shure

Shure Microflex MX400S Bedienungsanleitung

Shure

Shure PE15H-LC Bedienungsanleitung

Shure

Shure SM58 Bedienungsanleitung

Shure

Shure WH20 Bedienungsanleitung

Shure

Shure Unidyne III 545PE Bedienungsanleitung

Shure

Shure 512 Headset Microphone Bedienungsanleitung

Shure

Shure BETA 181 Bedienungsanleitung

Shure

Shure 526T Series II Super Punch Bedienungsanleitung

Shure

Shure SV100 Bedienungsanleitung

Shure

Shure MV5C Bedienungsanleitung

Shure

Shure 55SH Bedienungsanleitung

Shure

Shure Microflex MX400SE Series Bedienungsanleitung

Shure

Shure Centraverse Series Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

JLab

JLab GO TALK Bedienungsanleitung

Renkforce

Renkforce TY-109 Bedienungsanleitung

Trust

Trust 31008 Bedienungsanleitung