Shure PSM 900 Programmierhandbuch
1/30
PSM900 -- Wireless Personal Monitor Sys-
tem
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accor-
dance with the manufacturer’s instructions.
8. DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other appara-
tus (including amplifiers) that produce heat. Do not place any open flame sources on the product.
9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been dam-
aged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vas-
es, on the apparatus.
16. The MAINS plug or an appliance coupler shall remain readily operable.
17. The airborne noise of the Apparatus does not exceed 70dB (A).
18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing
connection.
Shure Incorporated
2/30
19. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
20. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
21. Operate this product within its specified operating temperature range.
WARNING
LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS
LOW A VOLUME AS POSSIBLE. Over exposure to excessive sound levels can damage your ears resulting in
permanent noise-induced hearing loss (NIHL). Please use the following guidelines established by the Occupation-
al Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing dam-
age occurs.
90dBSPL
at 8 hours
95dBSPL
at 4 hours
100dBSPL
at 2 hours
105dBSPL
at 1 hour
110dBSPL
at ½ hour
115dBSPL
at 15 minutes
120dBSPL
Avoid or damage may occur
HEARING PRECAUTIONS
To prevent possible hearing damage, do not listen at high volume levels for long peri-
ods.
SAFETY PRECAUTIONS
The possible results of incorrect use are marked by one of the two symbols—"WARNING" and "CAUTION"—de-
pending on the imminence of the danger and the severity of the damage.
WARNING: Ignoring these warnings may cause severe injury or death as a result of incorrect
operation.
CAUTION: Ignoring these cautions may cause moderate injury or property damage as a result
of incorrect operation.
Shure Incorporated
3/30
WARNING
•If water or other foreign objects enter the inside of the device, fire or electric shock may result.
•Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
WARNING: Battery packs shall not be exposed to excessive heat such as sunshine, fire, or the like.
CAUTION
•Never disassemble or modify the device, as failures may result.
•Do not subject to extreme force and do not pull on the cable or failures may result.
•Keep the product dry and avoid exposure to extreme temperatures and humidity.
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計
之特性及功能。第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時
方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學
及醫療用電波輻射性電機設備之干擾。
PSM 900
The Shure PSM 900 Wireless Personal Monitor System offers an unprecedented combination of superb audio
quality, robust RF performance, and category-leading features for the most demanding professional applications.
Patented Audio Reference Companding and advanced digital signal processing technology provide excellent
stereo separation and audio clarity. Exceptional transmitter linearity vastly reduces frequency intermodulation, al-
lowing more channels per frequency band. Patented CueMode technology enables the sound engineer to monitor
different stage mixes with the touch of a button.
Features
Unparalleled Audio Quality
•Bodypack receivers with advanced digital signal processing technology deliver more headroom, improved
stereo separation, and higher audio fidelity.
•Patented Audio Reference Companding offers natural and transparent sound.
• Available with Shure SE425 Sound Isolating™ earphones featuring dual high-definition MicroDrivers for accu-
rate and balanced audio response.
Robust RF Performance
•P9RA+ bodypack receivers offer enhanced signal reception and range.
•Precision front-end RF filtering significantly reduces RF interference for a cleaner, stronger RF signal, fewer
dropouts, and fewer audible artifacts.
®
Shure Incorporated
4/30
• Exceptional transmitter linearity vastly reduces frequency intermodulation and allows up to 20 compatible chan-
nels per frequency range.
•Automatic RF gain control prevents signal distortion due to RF overload before it can affect performance.
Category-Leading Setup and Operation Features
• CueMode allows monitoring of different stage mixes and storing of up to 20 separate channels on one body-
pack for quick and easy reference.
•Front panel RF mute switch enables or disables RF transmission during setup.
•Scan and Sync scans the RF environment with the bodypack and assigns an identified group and channel to
your system over wireless IR link.
•MixMode technology allows the bodypack user to combine two separate audio channels for simultaneous lis-
tening in both ears, or can transmit two independent IFB program feeds. Balance control on the bodypack ad-
justs the relative levels for each audio signal.
•Four-band parametric EQ gives the user the choice to adjust frequencies for a fully customized sound.
Advanced Rechargeability Options
•The SB900A lithium-ion rechargeable battery provides extended usage times and precise tracking of remaining
life and charge cycle details.
•The SCB800-US eight-bay charger brings up to eight SB900 batteries to full charge within two hours and has
charge status LEDs for each battery.
•The SBC200 dual-docking charger works with SB900A, P3RA, P9RA+, P10R+, QLX-D Digital Wireless Sys-
tems, and ULX-D Digital Wireless Systems, available with and without power supply.
•The SBC220 networked dual-docking charger works with SB900A, PSM 300 (P3RA only), PSM 900 (P9RA+
only), PSM 1000 (P10R+ only), QLX-D Digital Wireless Systems, ULX-D Digital Wireless Systems, and Axient
Digital (AD1 and AD2 only), available with and without power supply. When the SBC220 is connected to a net-
work, battery information for each transmitter can be viewed remotely.
Components
•P9T: Rack Unit Transmitter
•P9RA+: Bodypack Receiver
•PS43: Power supply
•Protective bumpers with 8 screws
Rackmount supplies
①Short rack ear
②Long rack ear
③Link bar to mount to similar rack unit
④2 antenna hole plugs
⑤8 rack ear screws
⑥4 rack mount screws with washers
⑦Extension cables and connectors for front-mounting antennas
®
®
®
®
Shure Incorporated
5/30
Quickstart Instructions
Rack Mount Transmitter
1. Connect to a power outlet using the supplied power adapter.
2. Attach the supplied antennas to the antenna out BNC connectors.
3. Connect the audio source, such as the output of a mixer, to the audio inputs. You can use both input jacks or
choose either one for a mono source.
◦For mono (one input), access the Audio menu and select Mono.
◦Set the input sensitivity to match the source by selecting Audio INPUT from the LCD configuration menu:
Aux (-10dBV) or Line (+4dBu).
4. Make sure the RF switch is OFF. Turn the power ON.
5. Adjust the audio source level so that, for the average input signal level, the top two yellow LEDs flicker and the
lower LEDs are solid.
◦ If the red clip LED illuminates, the inputs are overdriven. Decrease the level using the ▼▲ buttons or
change the input sensitivity to +4 dBu.
◦If the signal level is too low, change the input sensitivity to –10 dBV
Shure Incorporated
6/30
Shure Incorporated
7/30
Bodypack
Insert batteries and attach antenna. Turn on using the volume knob. The battery light illuminates.
Scan and Sync
1. On the bodypack, press the scan button. The display flashes SYNC NOW....
2. Align the IR windows on the bodypack and rack unit and press the sync button. The rack unit Level LEDs flash,
and it displays SYNC SUCCESS.
3. Turn the RF switch on. The blue RF LED illuminates on the bodypack to indicate that it is detecting the trans-
mitter. The bodypack also displays the RF signal strength (RF).
4. Important: Turn bodypack volume down before plugging in earphones.
5. Insert the earphones and slowly turn up the volume.
Shure Incorporated
8/30
Shure Incorporated
9/30
Rack Unit Transmitter
Front Panel Controls
①Input Level Control and Display
Use the ▼▲ buttons to adjust the audio so that, for the average input signal level, the top two yellow LEDs flicker
and the lower LEDs are solid. The red clip LED indicates the inputs are overdriven. Reduce the level at the audio
source or change the input sensitivity of the rack unit from the AUDIO > INPUT menu.
②Status Display and Menu Controls
Use the enter and exit buttons and the menu wheel to access the configuration menu. Push the menu wheel to
move the cursor to the next item. Turn the menu wheel to change a parameter—the enter button flashes. Press it
to save the value. Press the exit button to cancel changes and return to the previous menu.
③Synchronization Button
Press the sync button while rack unit and bodypack IR windows are aligned to transfer settings.
④Headphone Monitoring
Shure Incorporated
10/30
The volume control adjusts signal output to the 3.5 mm headphone jack. NOTE: it does not affect rear panel out-
puts.
⑤RF switch
Mutes RF output. For setting up multiple systems or adjusting settings without transmitting unwanted RF or audio
signals.
⑥Power Button
Turns the unit on and off.
Rear Panel Connectors
⑦Power
Connect the transmitter to a power outlet using the supplied power adapter.
⑧LOOP OUT
Sends a copy of the audio signal going into the transmitter to another device. See LOOP Applications.
⑨Audio Inputs
Connect to balanced or unbalanced outputs. Use either connector for mono input. Accepts both 1/4-inch or male
XLR connectors.
⑩Antenna (BNC)
Attach supplied antenna. If you are rack mounting, use a front panel or remote mounting kit from Shure.
Configuration Menu
Note: Configuration menu items may vary with regional model variations.
RF Settings
RADIO
G
Sets the group number
CH
Sets the channel number
Andere Handbücher für PSM 900
9
Inhaltsverzeichnis
Andere Shure Aufnahmegeräte Handbücher
Shure
Shure MVI Bedienungsanleitung
Shure
Shure ANI22 Bedienungsanleitung
Shure
Shure PSM1000 Bedienungsanleitung
Shure
Shure ANIUSB-Matrix Bedienungsanleitung
Shure
Shure R180 Bedienungsanleitung
Shure
Shure ANI4OUT Bedienungsanleitung
Shure
Shure PSM700 Bedienungsanleitung
Shure
Shure MVI Bedienungsanleitung
Shure
Shure PSM 300 Bedienungsanleitung
Shure
Shure P3RA Bedienungsanleitung
Shure
Shure LEGENDARY PERFOMANCE MVi Bedienungsanleitung
Shure
Shure M625 Bedienungsanleitung
Shure
Shure M78S Bedienungsanleitung
Shure
Shure 44 Series Bedienungsanleitung
Shure
Shure PSM 300 Bedienungsanleitung
Shure
Shure ANI4IN Series Bedienungsanleitung
Shure
Shure MVX2U Bedienungsanleitung
Shure
Shure ANI22 Bedienungsanleitung
Shure
Shure PSM 900 Bedienungsanleitung
Shure
Shure ANIUSB-Matrix Bedienungsanleitung
Beliebte Aufnahmegeräte Handbücher anderer Marken
Strymon
Strymon NIGHTSKY Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung
Tews Technologies
Tews Technologies TPMC465 Bedienungsanleitung
Honeywell
Honeywell Excel 50 Bedienungsanleitung
SeaLevel
SeaLevel COMM+8.LPCI Bedienungsanleitung
Arturia
Arturia AUDIOFUSE STUDIO Bedienungsanleitung
